Lutz Thuns schrieb:
On Thu, 22 Jul 2010 13:24:23 +0200, Martin Deppe
wrote: Ich hatte dann nicht mit Problemen diesbezüglich gerechnet, wenn ich meiner Frau die neue Version installiere. An ihrem Rechner ist mein "alter" TFT-Monitor (ein Samsung 2032bw) per VGA angeschlossen, der eine native Auflösung von 1680x1050 hat, da der Rechner "nur" den Grafikadapter des Mainboards ohne digitalem Ausgang hat.
Ich habe diesen gesamten Thread gelesen und alles, was hier gesagt wurde ausprobiert und noch etwas mehr, jedoch ohne Erfolg. Meines Erachtens besteht das Problem hauptsächlich darin, daß das Grafiksystem den Monitor nicht (sauber) erkennt (was ja auch schon von anderen vorher gesagt wurde) wenn der Monitor über VGA angeschlossen ist (über DVI läuft es immer sauber, soweit ich dies beurteilen kann). Ich (auch) verstehe nur nicht, wieso man (oder kann man doch?) den Monitor (und seine Eigenschaften) nicht einrichten respektive angeben kann.
Außerdem standen früher die Breitbildformate (z.B. 1680x1050 und sogar 1920x1200) bereits beim Boot zur Verfügung, was heute leider nicht mehr bzw. noch nicht wieder der Fall ist.
Wenn man wenigstens eine Möglichkeit hätte, den Monitor manuell anzugeben (die Automatik an dieser Stelle überschreibend), würde es m.E. (auf eigene Gefahr des Anwenders - aber immerhin) wieder funktionieren.
Welche Problematik stellt sich denn im Betrieb dar? Falsche Auflösung? Kein Bild? Was liefert denn die /var/log/Xorg.0.log ?
Hallo Lutz, sorry, ich war so sicher, daß ich geschrieben hatte, daß die Auflösung (im besten Falle) lediglich 1280x1024, in einem Fall sogar mal 1400x1050, meistens aber 1024x768 und teilweise sogar nur 640x480 betrug. Meine /var/log/Xorg.0.log sieht folgendermaßen aus (ich hoffe, Du kannst etwas damit anfangen): ------------------------------------------------------------------------------------------------------------------------------------------------ [ 36.487] X.Org X Server 1.8.0 Release Date: 2010-04-02 [ 36.487] X Protocol Version 11, Revision 0 [ 36.488] Build Operating System: openSUSE SUSE LINUX [ 36.488] Current Operating System: Linux inna 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64 [ 36.488] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD503HI_S23CJ9DZ409068-part6 resume=/dev/disk/by-id/ata-SAMSUNG_HD503HI_S23CJ9DZ409068-part5 splash=silent quiet vga=0x348 [ 36.488] Build Date: 05 July 2010 09:27:36PM [ 36.488] [ 36.488] Current version of pixman: 0.18.0 [ 36.488] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 36.488] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 36.488] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 22 10:01:06 2010 [ 36.488] (==) Using config file: "/etc/X11/xorg.conf" [ 36.488] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 36.489] (==) ServerLayout "X.org Configured" [ 36.489] (**) |-->Screen "Screen0" (0) [ 36.489] (**) | |-->Monitor "Monitor0" [ 36.490] (**) | |-->Device "Card0" [ 36.490] (**) |-->Input Device "Mouse0" [ 36.490] (**) |-->Input Device "Keyboard0" [ 36.490] (==) Automatically adding devices [ 36.490] (==) Automatically enabling devices [ 36.490] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 36.490] Entry deleted from font path. [ 36.490] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 36.490] Entry deleted from font path. [ 36.490] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 36.490] Entry deleted from font path. [ 36.490] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 36.490] Entry deleted from font path. [ 36.490] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 36.490] Entry deleted from font path. [ 36.490] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 36.490] Entry deleted from font path. [ 36.490] (**) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/ [ 36.490] (**) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" [ 36.490] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 36.490] (WW) Disabling Mouse0 [ 36.490] (WW) Disabling Keyboard0 [ 36.490] (II) Loader magic: 0x7d58a0 [ 36.490] (II) Module ABI versions: [ 36.490] X.Org ANSI C Emulation: 0.4 [ 36.490] X.Org Video Driver: 7.0 [ 36.490] X.Org XInput driver : 9.0 [ 36.490] X.Org Server Extension : 3.0 [ 36.504] (--) PCI:*(0:0:13:0) 10de:03d1:1462:7309 nVidia Corporation C61 [GeForce 6100 nForce 405] rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xdd000000/16777216, BIOS @ 0x????????/131072 [ 36.505] (II) Open ACPI successful (/var/run/acpid.socket) [ 36.505] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. [ 36.505] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. [ 36.505] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 36.505] (II) "record" will be loaded. This was enabled by default and also specified in the config file. [ 36.505] (II) "dri" will be loaded by default. [ 36.505] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. [ 36.505] (II) LoadModule: "glx" [ 36.510] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so [ 36.540] (II) Module glx: vendor="NVIDIA Corporation" [ 36.540] compiled for 4.0.2, module version = 1.0.0 [ 36.540] Module class: X.Org Server Extension [ 36.540] (II) NVIDIA GLX Module 195.36.31 Thu Jun 3 08:59:25 PDT 2010 [ 36.540] (II) Loading extension GLX [ 36.540] (II) LoadModule: "vnc" [ 36.544] (II) Loading /usr/lib64/xorg/modules/extensions/libvnc.so [ 36.544] (EE) LoadModule: Module vnc does not have a vncModuleData data object. [ 36.544] (II) UnloadModule: "vnc" [ 36.544] (II) Unloading /usr/lib64/xorg/modules/extensions/libvnc.so [ 36.544] (EE) Failed to load module "vnc" (invalid module, 0) [ 36.544] (II) LoadModule: "dbe" [ 36.545] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so [ 36.546] (II) Module dbe: vendor="X.Org Foundation" [ 36.546] compiled for 1.8.0, module version = 1.0.0 [ 36.546] Module class: X.Org Server Extension [ 36.546] ABI class: X.Org Server Extension, version 3.0 [ 36.546] (II) Loading extension DOUBLE-BUFFER [ 36.546] (II) LoadModule: "dri2" [ 36.547] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so [ 36.547] (II) Module dri2: vendor="X.Org Foundation" [ 36.547] compiled for 1.8.0, module version = 1.2.0 [ 36.547] ABI class: X.Org Server Extension, version 3.0 [ 36.547] (II) Loading extension DRI2 [ 36.547] (II) LoadModule: "extmod" [ 36.548] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so [ 36.548] (II) Module extmod: vendor="X.Org Foundation" [ 36.548] compiled for 1.8.0, module version = 1.0.0 [ 36.548] Module class: X.Org Server Extension [ 36.548] ABI class: X.Org Server Extension, version 3.0 [ 36.548] (II) Loading extension MIT-SCREEN-SAVER [ 36.548] (II) Loading extension XFree86-VidModeExtension [ 36.548] (II) Loading extension XFree86-DGA [ 36.548] (II) Loading extension DPMS [ 36.548] (II) Loading extension XVideo [ 36.548] (II) Loading extension XVideo-MotionCompensation [ 36.548] (II) Loading extension X-Resource [ 36.548] (II) LoadModule: "record" [ 36.549] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so [ 36.550] (II) Module record: vendor="X.Org Foundation" [ 36.550] compiled for 1.8.0, module version = 1.13.0 [ 36.550] Module class: X.Org Server Extension [ 36.550] ABI class: X.Org Server Extension, version 3.0 [ 36.550] (II) Loading extension RECORD [ 36.550] (II) LoadModule: "dri" [ 36.551] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so [ 36.551] (II) Module dri: vendor="X.Org Foundation" [ 36.551] compiled for 1.8.0, module version = 1.0.0 [ 36.551] ABI class: X.Org Server Extension, version 3.0 [ 36.551] (II) Loading extension XFree86-DRI [ 36.551] (II) LoadModule: "nvidia" [ 36.551] (II) Loading /usr/lib64/xorg/modules/updates/drivers/nvidia_drv.so [ 36.552] (II) Module nvidia: vendor="NVIDIA Corporation" [ 36.552] compiled for 4.0.2, module version = 1.0.0 [ 36.552] Module class: X.Org Video Driver [ 37.415] (II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010 [ 37.415] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 37.415] (++) using VT number 7 [ 37.429] (II) Primary Device is: PCI 00@00:0d:0 [ 37.430] (II) Loading sub module "fb" [ 37.430] (II) LoadModule: "fb" [ 37.431] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 37.431] (II) Module fb: vendor="X.Org Foundation" [ 37.431] compiled for 1.8.0, module version = 1.0.0 [ 37.431] ABI class: X.Org ANSI C Emulation, version 0.4 [ 37.431] (II) Loading sub module "wfb" [ 37.431] (II) LoadModule: "wfb" [ 37.432] (II) Loading /usr/lib64/xorg/modules/libwfb.so [ 37.432] (II) Module wfb: vendor="X.Org Foundation" [ 37.432] compiled for 1.8.0, module version = 1.0.0 [ 37.432] ABI class: X.Org ANSI C Emulation, version 0.4 [ 37.432] (II) Loading sub module "ramdac" [ 37.432] (II) LoadModule: "ramdac" [ 37.432] (II) Module "ramdac" already built-in [ 37.432] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 37.432] (==) NVIDIA(0): RGB weight 888 [ 37.432] (==) NVIDIA(0): Default visual is TrueColor [ 37.432] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 37.433] (**) NVIDIA(0): Enabling RENDER acceleration [ 37.433] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is [ 37.433] (II) NVIDIA(0): enabled. [ 37.918] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0 [ 37.919] (II) NVIDIA(0): NVIDIA GPU GeForce 6100 nForce 405 (C61) at PCI:0:13:0 [ 37.919] (II) NVIDIA(0): (GPU-0) [ 37.919] (--) NVIDIA(0): Memory: 524288 kBytes [ 37.919] (--) NVIDIA(0): VideoBIOS: 05.61.32.23.02 [ 37.919] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 37.919] (--) NVIDIA(0): Connected display device(s) on GeForce 6100 nForce 405 at [ 37.919] (--) NVIDIA(0): PCI:0:13:0: [ 37.919] (--) NVIDIA(0): CRT-0 [ 37.919] (--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock [ 37.919] (II) NVIDIA(0): Assigned Display Device: CRT-0 [ 37.919] (==) NVIDIA(0): [ 37.919] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 37.919] (==) NVIDIA(0): will be used as the requested mode. [ 37.919] (==) NVIDIA(0): [ 37.919] (II) NVIDIA(0): Validated modes: [ 37.919] (II) NVIDIA(0): "nvidia-auto-select" [ 37.919] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768 [ 37.920] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI [ 37.920] (WW) NVIDIA(0): from CRT-0's EDID. [ 37.920] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default [ 37.920] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. [ 37.920] (--) Depth 24 pixmap format is 32 bpp [ 37.920] (II) NVIDIA(0): Initialized GPU GART. [ 37.924] (II) NVIDIA(0): Setting mode "nvidia-auto-select" [ 38.002] (II) Loading extension NV-GLX [ 38.021] (II) NVIDIA(0): Initialized OpenGL Acceleration [ 38.520] (==) NVIDIA(0): Disabling shared memory pixmaps [ 38.520] (II) NVIDIA(0): Initialized X Rendering Acceleration [ 38.520] (==) NVIDIA(0): Backing store disabled [ 38.520] (==) NVIDIA(0): Silken mouse enabled [ 38.520] (==) NVIDIA(0): DPMS enabled [ 38.520] (II) Loading extension NV-CONTROL [ 38.521] (II) Loading extension XINERAMA [ 38.521] (II) Loading sub module "dri2" [ 38.521] (II) LoadModule: "dri2" [ 38.522] (II) Reloading /usr/lib64/xorg/modules/extensions/libdri2.so [ 38.522] (II) NVIDIA(0): [DRI2] Setup complete [ 38.522] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 38.522] (==) RandR enabled [ 38.522] (II) Initializing built-in extension Generic Event Extension [ 38.522] (II) Initializing built-in extension SHAPE [ 38.522] (II) Initializing built-in extension MIT-SHM [ 38.522] (II) Initializing built-in extension XInputExtension [ 38.522] (II) Initializing built-in extension XTEST [ 38.522] (II) Initializing built-in extension BIG-REQUESTS [ 38.522] (II) Initializing built-in extension SYNC [ 38.522] (II) Initializing built-in extension XKEYBOARD [ 38.522] (II) Initializing built-in extension XC-MISC [ 38.522] (II) Initializing built-in extension SECURITY [ 38.522] (II) Initializing built-in extension XINERAMA [ 38.522] (II) Initializing built-in extension XFIXES [ 38.522] (II) Initializing built-in extension RENDER [ 38.522] (II) Initializing built-in extension RANDR [ 38.522] (II) Initializing built-in extension COMPOSITE [ 38.522] (II) Initializing built-in extension DAMAGE [ 38.522] (II) Initializing extension GLX [ 38.618] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm [ 38.629] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 38.629] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 38.629] (**) Power Button: Applying InputClass "LocalKeyboard" [ 38.629] (II) LoadModule: "evdev" [ 38.631] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 38.632] (II) Module evdev: vendor="X.Org Foundation" [ 38.632] compiled for 1.8.0, module version = 2.4.0 [ 38.632] Module class: X.Org XInput Driver [ 38.632] ABI class: X.Org XInput driver, version 9.0 [ 38.632] (**) Power Button: always reports core events [ 38.632] (**) Power Button: Device: "/dev/input/event3" [ 38.636] (II) Power Button: Found keys [ 38.636] (II) Power Button: Configuring as keyboard [ 38.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 38.636] (**) Option "xkb_rules" "evdev" [ 38.636] (**) Option "xkb_model" "evdev" [ 38.636] (**) Option "xkb_layout" "de" [ 38.636] (**) Option "xkb_variant" "nodeadkeys" [ 38.638] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-90BEB0384DFE894FC6C76430E8611BB0119B95EE.xkm [ 38.641] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 38.641] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 38.641] (**) Power Button: Applying InputClass "LocalKeyboard" [ 38.641] (**) Power Button: always reports core events [ 38.641] (**) Power Button: Device: "/dev/input/event2" [ 38.643] (II) Power Button: Found keys [ 38.643] (II) Power Button: Configuring as keyboard [ 38.643] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 38.643] (**) Option "xkb_rules" "evdev" [ 38.643] (**) Option "xkb_model" "evdev" [ 38.643] (**) Option "xkb_layout" "de" [ 38.643] (**) Option "xkb_variant" "nodeadkeys" [ 38.645] (II) config/udev: Adding input device UVC Camera (046d:08ce) (/dev/input/event5) [ 38.645] (**) UVC Camera (046d:08ce): Applying InputClass "evdev keyboard catchall" [ 38.645] (**) UVC Camera (046d:08ce): Applying InputClass "LocalKeyboard" [ 38.645] (**) UVC Camera (046d:08ce): always reports core events [ 38.645] (**) UVC Camera (046d:08ce): Device: "/dev/input/event5" [ 38.648] (II) UVC Camera (046d:08ce): Found keys [ 38.648] (II) UVC Camera (046d:08ce): Configuring as keyboard [ 38.648] (II) XINPUT: Adding extended input device "UVC Camera (046d:08ce)" (type: KEYBOARD) [ 38.648] (**) Option "xkb_rules" "evdev" [ 38.648] (**) Option "xkb_model" "evdev" [ 38.648] (**) Option "xkb_layout" "de" [ 38.648] (**) Option "xkb_variant" "nodeadkeys" [ 38.655] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 38.655] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 38.655] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard" [ 38.655] (**) AT Translated Set 2 keyboard: always reports core events [ 38.655] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 38.658] (II) AT Translated Set 2 keyboard: Found keys [ 38.658] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 38.658] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 38.658] (**) Option "xkb_rules" "evdev" [ 38.658] (**) Option "xkb_model" "evdev" [ 38.658] (**) Option "xkb_layout" "de" [ 38.658] (**) Option "xkb_variant" "nodeadkeys" [ 38.659] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1) [ 38.659] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall" [ 38.659] (**) ImExPS/2 Generic Explorer Mouse: always reports core events [ 38.659] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1" [ 38.661] (II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons [ 38.661] (II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s) [ 38.661] (II) ImExPS/2 Generic Explorer Mouse: Found relative axes [ 38.661] (II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes [ 38.661] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse [ 38.661] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5 [ 38.661] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 38.661] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE) [ 38.661] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1 [ 38.661] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0 [ 38.661] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000 [ 38.661] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4 [ 38.661] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes. [ 38.661] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0) [ 38.661] (EE) No input driver/identifier specified (ignoring) [ 38.662] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 38.662] (EE) No input driver/identifier specified (ignoring) [ 38.705] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-A9ACCDF38EB1446AC7992CE0B930842F0AD908B1.xkm [ 39.073] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-A9ACCDF38EB1446AC7992CE0B930842F0AD908B1.xkm [ 66.582] (II) Power Button: Close [ 66.582] (II) UnloadModule: "evdev" [ 66.585] (II) Power Button: Close [ 66.585] (II) UnloadModule: "evdev" [ 66.588] (II) UVC Camera (046d:08ce): Close [ 66.588] (II) UnloadModule: "evdev" [ 66.591] (II) AT Translated Set 2 keyboard: Close [ 66.591] (II) UnloadModule: "evdev" [ 66.597] (II) ImExPS/2 Generic Explorer Mouse: Close [ 66.597] (II) UnloadModule: "evdev" Gruß Martin -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org