On Sun 19 Oct 2008, Torsten Foertsch wrote:
Ich habe
rechner 1 <==> rechner 2 <==> rechner 3
Normales Routing funktioniert. Ich kann von Rechner 1 auf 2 und 3 zugreifen, genauso von Rechner 3 auf 1 und 2 und natürlich von Rechner 2 auf 1 und 3.
Die Multicast Pakete werden auf 239.192.0.3 mit einer TTL von 5 geschickt. Schicke ich sie von Rechner 2 kommen die Pakete auf Rechner 1, 2 und 3 an. Pakete von Rechner 1 kommen auf 2 und 1 an, aber nicht auf Rechner 3. Entsprechend kommen Pakete von Rechner 3 nicht auf Rechner 1 an.
Was muß ich tun, damit das funktioniert?
Ich habe auf Rechner 2 XORP (http://www.xorp.org/ und http://software.opensuse.org/search?q=xorp) installiert. Damit geht es. Hier meine Konfiguration. Rechner 2 ist mit Rechner 1 über eth0 und mit Rechner 3 über eth1 verbunden. Möglicherweise ist in dieser Konfiguration noch einiges überflüssig. Aber es tut erstmal. Torsten interfaces { restore-original-config-on-shutdown: false interface eth0 { description: "frontend interface" disable: false /* default-system-config */ vif eth0 { disable: false address 192.168.9.3 { prefix-length: 24 broadcast: 192.168.9.255 disable: false } } } interface eth1 { description: "backend interface" disable: false /* default-system-config */ vif eth1 { disable: false address 192.168.92.49 { prefix-length: 24 broadcast: 192.168.92.255 disable: false } } } } fea { unicast-forwarding4 { disable: false forwarding-entries { retain-on-startup: false retain-on-shutdown: false } } } protocols { static { route 0.0.0.0/0 { next-hop: 192.168.9.1 metric: 1 } } } policy { /* Describe connected routes for redistribution */ policy-statement connected { term export { from { protocol: "connected" } } } } policy { /* Describe static routes for redistribution */ policy-statement static { term export { from { protocol: "static" } } } } plumbing { mfea4 { disable: false interface eth1 { vif eth1 { disable: false } } interface eth0 { vif eth0 { disable: false } } interface register_vif { vif register_vif { /* Note: this vif should be always enabled */ disable: false } } traceoptions { flag all { disable: false } } } } protocols { igmp { disable: false interface eth0 { vif eth0 { disable: false } } interface eth1 { vif eth1 { disable: false } } traceoptions { flag all { disable: false } } } } protocols { pimsm4 { disable: false interface eth0 { vif eth0 { disable: false } } interface eth1 { vif eth1 { disable: false } } interface register_vif { vif register_vif { /* Note: this vif should be always enabled */ disable: false } } static-rps { rp 192.168.9.3 { group-prefix 224.0.0.0/4 { } } } switch-to-spt-threshold { /* approx. 1K bytes/s (10Kbps) threshold */ disable: false interval: 100 bytes: 102400 } traceoptions { flag all { disable: false } } } fib2mrib { disable: false } } -- Need professional mod_perl support? Just hire me: torsten.foertsch@gmx.net -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org