From: "Falk Sauer"
Am Mittwoch 19 Dezember 2007 14:43:12 schrieb Christian Kuehn:
das ist bei einem produktiven System schon problematisch.
Zumal diese Meldung bei beiden Platten auftaucht, die Platten gerade mal 3 Wochen alt sind und diese Fehler m.E. erst mit 10.3 aufgetreten sind.
Und nur noch mal zur Klärung: * Kein VMWARE * SATA2-Kontroller im PCI-Slot * 2 Samsung-Platten SATA2
Komischerweise downgraded der Treiber ja auch von 3G auf 1,5G, denn beim Boot startet der Treiber mit: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7 ata3.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7 ata4.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133
um dann irgendwann runterzugehen: ata4: limiting SATA link speed to 1.5 Gbps ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata4.00: port_status 0x20080000 ata4.00: cmd c8/00:78:cf:3b:f0/00:00:00:00:00/ef tag 0 cdb 0x0 data 61440 in res 50/00:00:46:3c:f0/00:00:0f:00:00/ef Emask 0x2 (HSM violation) ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/133 ata4: EH pending after completion, repeating EH (cnt=4) ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb ata4: hotplug_status 0x20 ata4: soft resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/133 ata4: EH complete
bzw. ata3: limiting SATA link speed to 1.5 Gbps ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata3.00: port_status 0x20080000 ata3.00: cmd c8/00:88:bf:60:aa/00:00:00:00:00/ed tag 0 cdb 0x0 data 69632 in res 50/00:00:46:61:aa/00:00:2a:00:00/ed Emask 0x2 (HSM violation) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: EH pending after completion, repeating EH (cnt=4) ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb ata3: hotplug_status 0x10 ata3: soft resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: EH complete
sowas und schlimmeres kenne ich aus genau 2 Szenarien:
1. ranziges SATA Kabel 2. schwachbrüstiges Netzteil mit dem hübschen Nebeneffekt das das Problem erst dann auftritt wenn beide Platten heftigst rödeln und evtl. noch etwas auf der CPU und der Graka passiert.
btw: die Plattenhersteller haben alle ihr kleines Diagnosetool, ist auf der aktuellen Knoppicillin der CT drauf ...
Hi Falk, ich kenne dieses Problem auch, allerdings aus der 10.1er. Es hing mit einem Kernelupdate zusammen, ich habe den alten Kernel zurückgespielt und seitdem kann ich wieder einwandfrei arbeiten. Allerdings ist ein Kernelupdate nun ausgeschlossen. Deine beiden Punkte kann ich definitiv ausschließen. Ich hatte auch mit dem Rescue System ("uralter" Kernel) sofort wieder zugriff. Daniel -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org