Hallo Liste, versuche seit mehreren Tagen einen HP PSC 1110 all-in-one ( Multifunktionsgerät) unter SuSE 10.0 über USB zu installieren leider bisher ohne Erfolg. Als Drucker funktioniert das Gerät über Yast installiert wunderbar nur die Scanner Installation scheitert . Beim Scanner Test kommt die Fehlermeldung : "Error during device I/O" Meine aktuelle Sane Konfig. : === Backend saned === === Backend hpaio === grep: hpaio.conf: Datei oder Verzeichnis nicht gefunden die Ausgabe von sane-find-scanner : # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x3011 [psc 1100 series]) at libusb:001:004 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. die Ausgabe von scanimage -L ralf@linux:/etc/sane.d> scanimage -L device `hpaio:/usb/psc_1100_series?serial=MY3ADF20J4B0' is a hp HP psc 1100 series multi-function peripheral Verwendete Sane Version : sane-1.0.18-0.pm.2 Habe alles mögliche schon probiert komme aber irgendwie nicht weiter. Viele Grüße Ralf