Normalerweise brauche ich für die Nvidia-Treiber nichts anderes tun als im Update das Nvidia-Script aufzurufen und den Rechner bzw. X neu zu starten. Bei 2 Karten, funktioniert das aber nicht, eine davon ist eine Guillemot 3D Prophet II MX Dual-Display SuSE 10.0 uname -r 2.6.13-15.8-default Lt. hwinfo, sollten 2 Treiber installiert sein: 23: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA) [Created at pci.277] UDI: /org/freedesktop/Hal/devices/pci_10de_110 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card HW Class List: graphics card, pci Model: "Guillemot 3D Prophet II MX Dual-Display" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0110 "GeForce2 MX/MX 400" SubVendor: pci 0x14af "Guillemot Corporation" SubDevice: pci 0x7103 "3D Prophet II MX Dual-Display" Revision: 0xa1 Memory Range: 0xd6000000-0xd6ffffff (rw,non-prefetchable) Memory Range: 0xd8000000-0xdfffffff (rw,prefetchable) Memory Range: 0xd7ff0000-0xd7ffffff (ro,prefetchable,disabled) IRQ: 10 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000110sv000014AFsd00007103bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Driver DB0: 4, 4|nv Driver Info #1: XFree86 v4 Server Module: nvidia 3D Support: yes Color Depths: 16 Extensions: Options: Driver DB0: 4, 4|nvidia|3d||||16 HAL Properties: linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' info.bus = 'pci' info.parent = '/org/freedesktop/Hal/devices/pci_8086_7191' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' pci.product_id = 272 (0x110) pci.vendor_id = 4318 (0x10de) pci.subsys_product_id = 28931 (0x7103) pci.subsys_vendor_id = 5295 (0x14af) pci.device_class = 3 (0x3) pci.device_subclass = 0 (0x0) pci.device_protocol = 0 (0x0) pci.vendor = 'nVidia Corporation' info.vendor = 'nVidia Corporation' pci.product = 'NV11 [GeForce2 MX/MX 400]' info.product = 'NV11 [GeForce2 MX/MX 400]' pci.subsys_vendor = 'Guillemot Corporation' pci.subsys_product = '3D Prophet II MX Dual-Display' linux.hotplug_type = 1 (0x1) linux.subsystem = 'pci' info.udi = '/org/freedesktop/Hal/devices/pci_10de_110' Persistent Properties: hwinfo.bus = 4 (0x4) hwinfo.res.io = { '0x3c0,0x20,1,3' } hwinfo.res.interrupts = { '10,0,1' } hwinfo.res.memory = { '0xd6000000,0x1000000,1,3,1', '0xd8000000,0x8000000,1,3,2', '0xd7ff0000,0x10000,0,1,2' } hwinfo.features = 1 (0x1) hwinfo.hwclasslist = '00100020000000' hwinfo.sysfsbusid = '0000:01:00.0' hwinfo.sysfsid = '/devices/pci0000:00/0000:00:01.0/0000:01:00.0' hwinfo.subdevicename = '3D Prophet II MX Dual-Display' hwinfo.subdeviceid = 94467 (0x17103) hwinfo.subvendorname = 'Guillemot Corporation' hwinfo.subvendorid = 70831 (0x114af) hwinfo.devicename = 'GeForce2 MX/MX 400' hwinfo.deviceid = 65808 (0x10110) hwinfo.vendorname = 'nVidia Corporation' hwinfo.vendorid = 69854 (0x110de) hwinfo.revisionid = 161 (0xa1) hwinfo.baseclass = 3 (0x3) hwinfo.slot = 256 (0x100) hwinfo.active = 'unknown' hwinfo.needed = 'yes' hwinfo.available = 'yes' hwinfo.configured = 'yes' hwinfo.hwclass = 'graphics card' hwinfo.model = 'Guillemot 3D Prophet II MX Dual-Display' hwinfo.parentid = 'vSkL.+oqW+GBE7wA' hwinfo.uniqueid = 'VCu0.EAy41NqL+N6' info.udi = '/org/freedesktop/Hal/devices/pci_10de_110' Config Status: cfg=yes, avail=yes, need=yes, active=unknown Attached to: #16 (PCI bridge) Aus /etc/X11/xorg.conf Section "Device" BoardName "GeForce2 MX/MX 400" BusID "1:0:0" Driver "nv" Identifier "Device[0]" Option "usevnc" "no" VendorName "NVidia" EndSection Sollte es reichen einfach nur /usr/bin/switch2nvidia aufzurufen oder in der xorg.conf nv durch nvidia zu ersetzen? Bei der anderen Karte hat das jedenfalls nicht geklappt, aber ich denke dort habe ich ein Framebuffer-Problem. Versuche ich die Karte nach der Ausführung des Nvidia-Scripts mit sax2 zu konfigurieren, wird mir 3D nicht zur Auswahl angeboten und ich kann auch den Treiber nicht ändern. Gibt es da bei Sax2 unter Suse 10 vielleicht einen "Experten-Modus"? Bevor ich es ausprobiere, frage ich mal lieber. Al