David Haller, Mittwoch, 4. Januar 2006 00:14:
Mail doch bitte mal die Ausgabe von 'hdparm -i'
/dev/hda: Model=FUJITSU MHT2080AH, FwRev=006C, SerialNo=NP1RT5425556 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=155239949 IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a: * signifies the current active mode
und 'cat /proc/ide/hd?/settings'
name value min max mode ---- ----- --- --- ---- acoustic 0 0 254 rw address 0 0 2 rw bios_cyl 65535 0 65535 rw bios_head 16 0 255 rw bios_sect 63 0 63 rw bswap 0 0 1 r current_speed 69 0 70 rw failures 0 0 65535 rw init_speed 69 0 70 rw io_32bit 0 0 3 rw keepsettings 0 0 1 rw lun 0 0 7 rw max_failures 1 0 65535 rw multcount 16 0 16 rw nice1 1 0 1 rw nowerr 0 0 1 rw number 0 0 3 rw pio_mode write-only 0 255 w unmaskirq 0 0 1 rw using_dma 1 0 1 rw wcache 1 0 1 rw
Und mail mir mal per PM die komplette boot.msg / Ausgabe von dmesg ob mir da irgendwas auffaellt.
Yep, kommt sogleich. Danke schon mal. -- Andre Tann