Hallo,
Gunnar Salbeck wrote :
Lad´ dir den Treiber von der Nvidia Homepage runter und mach dann
genau nach Anleitung weiter. Kannst ja den Treiber auf CD brennen
und dann rumreichen oder per Netzwerk verfügbar machen.
Ist bestimmt ganz nett für die Schüler.
ftp://ftp.gwdg.de/pub/linux/suse/ftp.suse.com/suse/i386/supplementa
ry/X/nvidia-installer-HOWTO.html
Nun, ähem, ich habe heute mit YOU das Kernel-Update gesaugt.
macmewes@usevote:~> rpm -q kernel-default
kernel-default-2.6.8-24.3
Nach einem Reboot habe ich dann festgestellt, daß das nVidia-Logo
nicht mehr hochkommt und bin dann nach www.nvidia.com gegangen und
habe mir dort die aktuellen Treiber gezogen.
Von dort bin ich auf die obig beschriebene Seite gekommen und habe
anhand der Anleitung erstmal versucht den nVidia-Treiber so neu
einzubinden.
X-Server-Neustart -> kein Ergebnis
Strg+Alt+F1 / root / init3 / init5 -> kein Ergebnis (wie erwartet)
Reboot -> kein Ergebnis (wie erwartet)
Als habe ich mir die Anleitungen zur manuellen Installation von
obiger URL gezogen und bin wie folgt vorgelaufen:
Strg+Alt+F1 / root / init3
cd /usr/src/linux
make cloneconfig
make prepare-all
chmod +x $directory/NVIDIA-Linux-x86-1.0-6111-pkg1.run
sh $diretory/NVIDIA-Linux-x86-1.0-6111-pkg1.run -q \
--kernel-source-path=/usr/src/linux
Installation klappte, also beherzt
sax2 -m 0=nvidia
getätigt, und dann:
<zitat>
SaX: startup
xc: sorry could not start configuration server
xc: this could have the following reasons:
- the card is still not supported. To get
further information about the driver status
please have a look at:
http://http://www.x.org
- the card was not detected correctly. In
this case please get the information which
X11 module provide support for the card
and set the module using the following
command:
sax2 -m 0=<name of the module>
Note: 0 is a digit not a letter
Note: Information about modules are
provided on the mentioned WWW-Page
- the card was detected but the server fails
to start in spite of the detection. In this
case something more serious had happened.
Please have a look at the log file:
/var/log/SaX.log
xc: if you can not determine the cause
please get in contact with:
Please include the log file and a detailed
description into your e-mail
xc: abort...
</zitat>
Die benannte Datei beinhaltet interessante Dinge, weswegen ich davon
ausgehe, das letzteres der Fall ist. Sprich, die Karte wird erkannt,
aber der X-Server kommt aus denkwürdigen Gründen nicht hoch.
Denkwürdig scheint mir der allerletzte Satz zu sein:
Fatal server error:
no screens found
Was mir das jetzt sagen soll? Ich habe nicht die Spur eines Schimmers.
Für die Techies dennoch hier ein paar Auszüge.:
[...]
VERSION : SaX2 compiled for: [SuSE Linux 9.2 (i586)]
PARAMETER : -m 0=nvidia
[...]
02-Nov 22:52:43 <I> [ Sysp: Server detection data
Card0 => BusId : 0x1
Card0 => SlotId : 0x00
Card0 => FuncId : 0x0
Card0 => Vendor : NVidia
Card0 => Device : GeForce4 MX440SE
Card0 => VID : 0x10de
Card0 => DID : 0x0181
Card0 => Module : nvidia
Card0 => BusType : AGP
Card0 => Detected : 1
Card0 => Flag : DEFAULT
Card0 => SUB-VID : 0x0000
Card0 => SUB-DID : 0x0000
[...]
02-Nov 22:52:45 <I> [ Sysp: 3D detection data
Card3D0 => Install : <none>
Card3D0 => Remove : <none>
Card3D0 => Packages : <none>
Card3D0 => Active : 0
Card3D0 => Answer : no
Card3D0 => ScriptReal : <none>
Card3D0 => ScriptSoft : <none>
Card3D0 => Flag : NVReal
[...]
Section "Device"
BoardName "GeForce4 MX440SE"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device[0]"
VendorName "NVidia"
EndSection
[...]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN
is set)
(--) PCI:*(1:0:0) nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x]
rev 162, Mem @ 0xe0000000/24, 0xd8000000/27
[...]
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6111
[...]
ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) NVIDIA X Driver 1.0-6111 Tue Jul 27 07:56:22 PDT 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Chipset NVIDIA GPU found
(II) Found 1 PCI NVIDIA devices
[...]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) NVIDIA(0): Using HW cursor
(==) NVIDIA(0): Video key set to default value of 0x83e
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xE0000000
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
[...]
bis dahin - kind regards
Martin Mewes
--
######################################################################
http://www.webmin.com/ http://webmin.mamemu.de/
Webbased Administration Tool for Unixoid Systems :-)
Member of the Webmin Translation Team
######################################################################