Hallo, Am Mi, 2004-09-15 um 16.29 schrieb Heinz W. Pahlke: Am Di, 2004-09-14 um 22.46 schrieb Harald Huthmann:
Am Dienstag, 14. September 2004 20:04 schrieb Siegfrid Brandstätter:
Am Di, 2004-09-14 um 19.26 schrieb Heinz W. Pahlke:
Hallo,
nachdem jetzt nach halbtaegiger Ruhe so langsam die ersten Mails aus der Liste eintrudeln, kann es weitergehen.
On 14-Sep-2004 Siegfrid Brandstätter wrote:
linux:/etc/opt/kde3/share/config/kdm # ls /kdmrc /bin/ls: /kdmrc: No such file or directory
Logisch. Liegt ja auch nicht dort, sondern unter /etc/opt/kde3/share/config/kdm/
Der Inhalt: nur der Anfang von " kdm ". Aber ganz anders ist" kdmrc ", da kann ich mich nicht entscheiden welches ich nicht brauche. General] AuthDir=/var/lib/xdm/authdir/authfiles/ ConfigVersion=2.0 PidFile=/var/run/kdm.pid Xservers=/etc/opt/kde3/share/config/kdm/Xservers [Shutdown] HaltCmd=/sbin/halt LiloCmd=/sbin/lilo LiloMap=/boot/map RebootCmd=/sbin/reboot UseLilo=false [X-*-Core] AllowNullPasswd=true AllowRootLogin=true AllowShutdown=Root AutoReLogin=false Reset=/etc/X11/xdm/Xreset Resources=/etc/X11/xdm/Xresources Session=/etc/X11/xdm/Xsession Setup=/etc/X11/xdm/Xsetup Startup=/etc/X11/xdm/Xstartup TerminateServer=true [X-*-Greeter] AdminSession=YaSTadminSession AntiAliasing=false BackgroundCfg=/etc/opt/kde3/share/config/kdm/backgroundrc ColorScheme= DefaultUser=claudia EchoMode=NoEcho FaceSource=AdminOnly FailFont=helvetica,12,-1,5,75,0,0,0,0,0 FocusPasswd=false GUIStyle=HighColor GreetFont=charter,24,-1,5,50,0,0,0,0,0 GreetString=Willkommen zu Linux- SuSE 9.0 Pro. GreeterPosFixed=false GreeterPosX=100 GreeterPosY=100 HiddenUsers=root Language=de LogoArea=Clock LogoPixmap= und so weiter ################## # KDM configuration example. # Note, that all comments will be lost if you change this file with # the kcontrol frontend. # # Definition: the greeter is the login dialog, i.e., the part of KDM # which the user sees. # # You can configure every X-display individually. # Every display has a display name, which consists of a host name # (which is empty for local displays specified in the Xservers file), # a colon and a display number. Additionally, a display belongs to a # display class (which can be ignored in most cases; the control center # does not support this feature at all). # Sections with display-specific settings have the formal syntax # "[X-" host [":" number [ "_" class ]] "-" sub-section "]" # You can use the "*" wildcard for host, number and class. You may omit # trailing components; they are assumed to be "*" then. # The host part may be a domain specification like ".inf.tu-dresden.de". # From which section a setting is actually taken is determined by these # rules: # - an exact match takes precedence over a partial match (for the host part), # which in turn takes precedence over a wildcard # - precedence decreases from left to right for equally exact matches # Example: display name "myhost:0", class "dpy". # [X-myhost:0_dpy] precedes # [X-myhost:0_*] (same as [X-myhost:0]) precedes # [X-myhost:*_dpy] precedes # [X-myhost:*_*] (same as [X-myhost]) precedes # [X-*:0_dpy] precedes # [X-*:0_*] (same as [X-*:0]) precedes # [X-*:*_*] (same as [X-*]) # These sections do NOT match this display: # [X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*] # If a setting is not found in any matching section, the default is used. # # Every comment applies to the following section or key. # The defaults refer to KDM's built-in values, not anything set in this file. # [General] # This option exists solely for the purpose of a clean automatic upgrade. # Don't even think about changing it! ConfigVersion=2.0 # If "false", KDM won't daemonize after startup. Note, that you needn't to # use this if you start KDM from inittab, as KDM won't daemonize in this case # automatically. Default is true. - schnitt - und das Ende # when KDM comes up. If "false", the auto-login must be initiated by crashing # the X-server with Alt-Ctrl-BackSpace. Default is true #AutoLogin1st=false NoPassEnable=false NoPassUsers= # Greeter config for 1st local display [X-:0-Greeter] # No admin button on local kdm AdminSession= # See above #PreselectUser=Default # See above #DefaultUser=johndoe # Enable KDM's built-in xconsole. Note, that this can be enabled for only # one display at a time. Default is false ShowLog=false #EnableChooser=false # The data source for KDM's built-in xconsole. The default "" means that # a console log redirection should be requested from /dev/console. LogSource=/dev/xconsole
Wie gesagt, versuche es mal mit "strace yast2" und maile die letzten Zeilen an die Liste.
Beste Gruesse,
Heinz. Da es nicht mehr ist sende ich alles. sigi@linux:~> su Password: linux:/home/sigi # strace yast2 strace: exec: Exec format error execve("/sbin/yast2", ["yast2"], [/* 69 vars */]) = 0 linux:/home/sigi # Versuch doch mal ob yast auf der Konsole noch will
Konsole öffenen (KDE?). Dann Dein geliebtes sux. Dann yast eingeben. (und [ENTER])
Gruß Harald
Das will leider gar nicht, Heute nicht mal das Anmeldefenster. sigi@linux:~> xhost -local:root@ non-network local connections being removed from access control list sigi@linux:~> su Password: linux:/home/sigi # yast2 linux:/home/sigi # sigi@linux:~> sux Password: linux:/home/sigi # yast linux:/home/sigi # Wann ist su, sux oder sux - richtig oder falsch. Ich habe im Benutzerhandbuch nur immer su. saludos Sigi