Hallo Liste, ich habe mir die Dimage A1 von Minolta gegönnt, da diese sich als Wechseldatenträger verwenden läßt. Unter Win kein Problem, unter meiner SuSE 8.2 (Kernel 2.4.20) gibts nur einen Pieps und auf der Konsole eine Latte von Meldungen vom Kernel mit I/O errors etc. Hier jetzt noch mal die Konsolen meldungen en datail: Jun 27 17:50:19 Barad-dur kernel: sdb : READ CAPACITY failed. Jun 27 17:50:19 Barad-dur kernel: sdb : status = 0, message = 00, host = 7, driver = 00 Jun 27 17:50:19 Barad-dur kernel: sdb : sense not available. Jun 27 17:50:19 Barad-dur kernel: sdb : block size assumed to be 512 bytes, disk size 1GB. Jun 27 17:50:19 Barad-dur kernel: sdb: test WP failed, assume Write Enabled Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 0 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 1 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 2 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 3 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur kernel: SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 70000 Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 4 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 5 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur last message repeated 2 times Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 0 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur last message repeated 7 times Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 2097144 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur last message repeated 5 times Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 2097144 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur last message repeated 5 times Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 0 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur last message repeated 3 times Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 0 Jun 27 17:50:19 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:19 Barad-dur last message repeated 3 times Jun 27 17:50:19 Barad-dur kernel: unable to read partition table Jun 27 17:50:19 Barad-dur kernel: I/O error: dev 08:10, sector 0 Jun 27 17:50:26 Barad-dur kernel: sdb : READ CAPACITY failed. Jun 27 17:50:26 Barad-dur kernel: sdb : status = 1, message = 00, host = 0, driver = 08 Jun 27 17:50:26 Barad-dur kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70 2 Jun 27 17:50:26 Barad-dur kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 Jun 27 17:50:26 Barad-dur kernel: sdb : block size assumed to be 512 bytes, disk size 1GB. Jun 27 17:50:26 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:26 Barad-dur last message repeated 7 times Jun 27 17:50:26 Barad-dur kernel: I/O error: dev 08:10, sector 0 Jun 27 17:50:26 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:26 Barad-dur last message repeated 7 times Jun 27 17:50:26 Barad-dur kernel: I/O error: dev 08:10, sector 2097144 Jun 27 17:50:26 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:26 Barad-dur last message repeated 5 times Jun 27 17:50:26 Barad-dur kernel: I/O error: dev 08:10, sector 2097144 Jun 27 17:50:26 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:26 Barad-dur last message repeated 5 times Jun 27 17:50:26 Barad-dur kernel: I/O error: dev 08:10, sector 0 Jun 27 17:50:26 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:26 Barad-dur last message repeated 3 times Jun 27 17:50:26 Barad-dur kernel: I/O error: dev 08:10, sector 0 Jun 27 17:50:26 Barad-dur kernel: lost async page write due to I/O error on 08:10 Jun 27 17:50:26 Barad-dur last message repeated 3 times Jun 27 17:50:26 Barad-dur kernel: unable to read partition table Jun 27 17:50:26 Barad-dur kernel: I/O error: dev 08:10, sector 0 Was will er mir damit genau sagen?!? Vor einiger Zeit hatte ich einen 6 in 1 Cardreader (USB 2.0) dran, der tadellos erkannt wurde, mit USB-Sticks hatte ich bisher auch keine Probleme. Ein cdrecord --scanbus liefert: Barad-dur:/dev # cdrecord --scanbus Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). scsibus0: 0,0,0 0) 'IBM ' 'DCAS-34330 ' 'S65A' Disk 0,1,0 1) * 0,2,0 2) 'YAMAHA ' 'CRW2100S ' '1.0H' Removable CD-ROM 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) 'TOSHIBA ' 'DVD-ROM SD-M1612' '1004' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * scsibus2: 2,0,0 200) '' '' '' Removable not present Disk 2,1,0 201) * 2,2,0 202) * 2,3,0 203) * 2,4,0 204) * 2,5,0 205) * 2,6,0 206) * 2,7,0 207) * Barad-dur:/dev # Dies kommt allerdings auch, wenn die Kamera gar nicht angesteckt ist... Ich hoffe mit kann jemand helfen. Ach ja, ein lsmod liefert: Barad-dur:/dev # lsmod | grep usb usbserial 19580 0 (autoclean) (unused) usb-storage 61876 0 usb-ohci 19720 0 (unused) usbcore 63116 1 [usbserial usb-storage usb-ohci] Barad-dur:/dev # Es sollten also alle wichtigen Module geladen sein.. Ich hatte dies auch schon mal in der Multimedialiste gepostet, da konnte mir auch nicht so recht geholfen werden :-( Ciao Hubert -- megatec electronic GmbH Dipl. Ing. Hubert Moesslein Lehenhammer 14 92268 Etzelwang @ : msl@megatec-electronic.de