Hallo Leute,
ich habe mal eine Frage. Ich habe jetzt KDE 3.2 installiert und wollte nach
längerem wieder einmal eine Audio CD brennen. k3b jedoch bricht immer ab mit
dem Kommentar Audio Dekodierung schlug fehl. Also habe ich mit xmms einfach
wav Dateien erstellt. Mit dem selben Ergebniss. k3b ist nicht zu überzeugen.
Auf der Konsole klappt es nun aber auch nicht, hier mal die Konsole:
Etwas langer Text, sorry:
workstation:/home/doertbud # cdrecord -v speed=16 dev=1,0,0 -pad -audio *.wav
Cdrecord-Clone 2.01a18-dvd (i686-suse-linux) Copyright (C) 1995-2003 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to .
Note: The author of cdrecord is not to be bothered with problems in this
version.
TOC Type: 0 = CD-DA
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
cdrecord: Warning: using inofficial libscg transport code version
(okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75
02/10/21 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.0A'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1345536 = 1314 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 69 MB (06:53.30) no preemp pad
Track 02: audio 46 MB (04:35.51) no preemp pad
Track 03: audio 47 MB (04:40.39) no preemp pad
Track 04: audio 41 MB (04:05.10) no preemp pad
Track 05: audio 48 MB (04:45.85) no preemp pad
Track 06: audio 52 MB (05:11.30) no preemp pad
Track 07: audio 56 MB (05:34.83) no preemp pad
Track 08: audio 54 MB (05:24.12) no preemp pad
Track 09: audio 43 MB (04:16.83) no preemp pad
Track 10: audio 45 MB (04:30.55) no preemp pad
Track 11: audio 79 MB (07:51.95) no preemp pad
Track 12: audio 58 MB (05:47.45) no preemp pad
Track 13: audio 35 MB (03:31.17) no preemp pad
Track 14: audio 50 MB (04:57.95) no preemp pad
Total size: 732 MB (72:32.48) = 326436 sectors
Lout start: 732 MB (72:34/36) = 326436 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 33409
Starting to write CD/DVD at speed 16 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Performing OPC...
cdrecord: Input/output error. send opc: scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 23 21 90 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 2302352 (not valid)
cmd finished after 4.881s timeout 60s
cdrecord: OPC failed.
Writing time: 4.971s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Weiß jemand Rat für mich.
Lieber Gruß Can
