Hallo Leute, ich versuche mit suse 9.0 ein Raid 1 aufzusetzen und erhalte in der boot.msg die nachstehende Meldung: 6>SiI680: IDE controller at PCI slot 00:12.0 <6>PCI: Found IRQ 5 for device 00:12.0 <6>SiI680: chipset revision 2 <6>SiI680: not 100%% native mode: will probe irqs later <6>SiI680: BASE CLOCK == 100 <6> ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio <6> ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio <4>hdd: CD-ROM CDU55E, ATAPI CD/DVD-ROM drive <4>hde: Maxtor 6E030L0, ATA DISK drive <4>hdg: Maxtor 6E030L0, ATA DISK drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>ide2 at 0xcc810080-0xcc810087,0xcc81008a on irq 5 <4>ide3 at 0xcc8100c0-0xcc8100c7,0xcc8100ca on irq 5 <4>hde: attached ide-disk driver. <4>hde: host protected area => 1 <6>hde: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63 <4>hdg: attached ide-disk driver. <4>hdg: host protected area => 1 <6>hdg: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63 <6>ide-floppy driver 0.99.newide <6>Partition check: <6> hde: hde1 <6> hdg: [PTBL] [3738/255/63] hdg1 hdg2 hdg3 hdg4 <6>ide-floppy driver 0.99.newide <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6> [events: 00000000] <3>md: invalid raid superblock magic on hde1 <4>md: hde1 has invalid sb, not importing! <1>md: could not import hde1! <6>md: autorun ... <6>md: ... autorun DONE. in der /etc/ habe ich auch keine raidtab. Nun bitte ich um Rat? hans