Ich hab eben den Kernel 2.4.21 kompiliert, und die DMA unterstützung haut nicht sorecht hin... für die festplatten hda und hdb gehts ohne probleme: ... ausschalten: linux:/home/roland # hdparm -d0 /dev/hda /dev/hda: setting using_dma to 0 (off) using_dma = 0 (off) ... einschalten: linux:/home/roland # hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) using_dma = 1 (on) bei den cdrom laufwerken ( hdc und hdd) kommt allerdings folgendes: linux:/home/roland # hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) ein hdparm -i /dev/hdc gibt mir folgendes: linux:/home/roland # hdparm -i /dev/hdc /dev/hdc: Model=TOSHIBA DVD-ROM SD-M1712, FwRev=J004, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=192kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: 2 3 4 5 also müsste ja dma eigentlich funktionieren, (hat es auch bei 2.4.20 noch) das AMD/nForce modul habe ich mit einkompiliert, hdc und hdd = ide-scsi, aber das sollte ja nix machen, oder? bitte um tipps... mfg, roland kemer