Hallo, Suse 8.2 greift alle 3 Sekunden auf meine IBM 80GB- Festplatte zu. Die LED der Festplatte leuchtet kurz auf. Boote ich Knoppix, habe ich das Phänomen nicht, auch nicht bei Suse 7.0. Was könnte es sein? Meine IBM-FP: root@rex2:~>hdparm -iv /dev/hda /dev/hda: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 10011/255/63, sectors = 160836480, start = 0 Model=IC35L090AVV207-0, FwRev=V23OA63A, SerialNo=VNVC00G3C58JVD Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16 CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=160836480 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a: 2 3 4 5 6 thx Ekkard