Liebe Leute, es hat geklappt!!! Erst nochmal herzlichen Dank an all die vielen Rueckmeldungen. Die Loesung war letztlich folgende: Die Treiber von Nvidia scheinen nicht fuer (m)einen SMP-Kernel tauglich zu sein. Erst das Selbstkompilieren der nvidia.o nach der Anleitung auf ftp://ftp.suse.com/pub/suse/i386/supplementary/X/XFree86/nvidia-installer-HOWTO.html ============== 1) Download the according 'NVIDIA_GLX' and 'NVIDIA_kernel' RPMs from nvidia ftp server and install these with the following commands: rpm --justdb -Uhv NVIDIA_kernel*.rpm rpm -Uhv NVIDIA_GLX*.rpm 2) Kernel sources must be installed and configured. Usually this means installing the 'kernel-source' RPM with YaST2 and configure it then with the following commands: cp /boot/vmlinuz.config /usr/src/linux/.config cp /boot/vmlinuz.version.h /usr/src/linux/include/linux cp /boot/vmlinuz.autoconf.h /usr/src/linux/include/linux cd /usr/src/linux make cloneconfig dep 3) Download nvidia installer and extract it with the following command NVIDIA-Linux-x86-1.0-4363.run --extract-only 4) Compile and install the nvidia kernel module with the following commands: cd NVIDIA-Linux-x86-1.0-4363/usr/src/nv make install depmod -a 5) Enable 3D support with SaX2. ============== hat zum Erfolg gefuehrt. Allerdings liess sich der 3D support nicht mit Sax einschalten, sondern komischerweise mit 'switch2nvidia_glx'. Ich habe ein paar Benchmarks durchgefuehrt ... nur um sicherzugehen, dass OpenGL auch tatsaechlich laeuft: ... und das ziemlich gut. Hoffe nur, die Treiber sind auch einigermassen stabil ;-)) Das Starten der Grafikkonfiguration in Yast hat immerhin schon zweimal das ganze System einfach zum Reboot gebracht. Netter Nebeneffekt: durch eure Hilfe habe ich gleich auch noch die XF86config getunt. Einen schoenen Tag wuenscht Thomas