Hi, Patrick Hess schrieb:
René Matthäi schrieb:
(Ich werde wohl noch mal eine andere Mail darüber schreiben, dass beim Kopieren eines Films von vfat nach vfat auf eine andere Partition der gleichen Platte, vielleicht relativ stark fragmentiert, bei mir Transferraten von 0,8 MB/s durchschnittlich vorkommen. Das _ist_ zu wenig, oder?!? Vielleicht hat alles irgendwie miteinander zu tun.)
Vermutlich. Was sagt denn ein `hdparm /dev/$PLATTE`?
Die von mir genannten DMA-Modi stimmen schon... Aber schaden kanns nichts, also: /dev/hda: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 10011/255/63, sectors = 160836480, start = 0 Model=IC35L080AVVA07-0, FwRev=VA4OA50K, SerialNo=VNC400A4L0DU8A Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 2 3 4 5 /dev/hdc: HDIO_GET_MULTCOUNT failed: Input/output error IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) BLKRAGET failed: Input/output error HDIO_GETGEO failed: Invalid argument Model=PLEXTOR CD-R PX-W2410A, FwRev=1.04, SerialNo=461029 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no /dev/hde: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 79408/16/63, sectors = 80043264, start = 0 Model=Maxtor 5T040H4, FwRev=TAH71DP0, SerialNo=T4HBQ4HC Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80043264 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 0: 1 2 3 4 5 6 /dev/hdg: HDIO_GET_MULTCOUNT failed: Invalid argument IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 1 (on) readahead = 8 (on) HDIO_GETGEO failed: Invalid argument Model=Pioneer DVD-ROM ATAPIModel DVD-116 0122, FwRev=E1.22, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=13395, BuffSize=64kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 *udma4 AdvancedPM=no Drive conforms to: device does not report version: 1 2 3 4 5 Ré