Hallo, Das Modem wird zwar im Yast (SuSE 8.1) automatisch erkannt mit der Bezeichnung 'ADSL-Modem' aber funktioniert dann trotzdem nicht. (wie erwartet) Jedoch die Voraussetzungen, die in der Dokumentation zum acm - Kernelmodul beschrieben sind, sind teilweise erfüllt (denke ich). Nun wäre meine Frage ob dieser Treiber dennoch irgendwie funktionierern könnte. Mit freundlichen Grüßen Bernhard /proc/usb/devices : T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e4863000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1110 ProdID=900f Rev=40.8b S: Product=ADSL-USB Modem C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=07 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=03(Int.) MxPS= 64 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 2 Alt= 1 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 159 Ivl=1ms I: If#= 2 Alt= 2 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 265 Ivl=1ms I: If#= 2 Alt= 3 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 424 Ivl=1ms I: If#= 2 Alt= 4 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 530 Ivl=1ms I: If#= 2 Alt= 5 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 636 Ivl=1ms I: If#= 2 Alt= 6 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 795 Ivl=1ms I: If#= 2 Alt= 7 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS= 901 Ivl=1ms I: If#= 2 Alt= 8 #EPs= 1 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E: Ad=88(I) Atr=01(Isoc) MxPS=1007 Ivl=1ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e4861000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms Auszug aus /var/log/messages : Oct 22 19:39:33 linux syslogd 1.4.1: restart. Oct 22 19:39:33 linux /etc/hotplug/usb.rc[424]: loaded HCD: usb-ohci Oct 22 19:39:37 linux insmod: Using /lib/modules/2.4.19-4GB/kernel/drivers/usb/acm.o Oct 22 19:39:37 linux insmod: Symbol version prefix '' Oct 22 19:39:37 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Oct 22 19:39:37 linux kernel: Inspecting /boot/System.map-2.4.19-4GB Oct 22 19:39:38 linux kernel: Loaded 14220 symbols from /boot/System.map-2.4.19-4GB. Oct 22 19:39:38 linux kernel: Symbols match kernel version 2.4.19. Oct 22 19:39:38 linux kernel: Loaded 324 symbols from 20 modules. Oct 22 19:39:38 linux kernel: sis900.c: v1.08.04 4/25/2002 Oct 22 19:39:38 linux kernel: PCI: Assigned IRQ 11 for device 00:03.0 Oct 22 19:39:38 linux kernel: eth0: Realtek RTL8201 PHY transceiver found at address 1. Oct 22 19:39:38 linux kernel: eth0: Using transceiver found at address 1 as default Oct 22 19:39:38 linux kernel: eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:d0:09:e4:44:bd. Oct 22 19:39:38 linux kernel: eth0: Media Link Off Oct 22 19:39:38 linux kernel: usb.c: registered new driver usbdevfs Oct 22 19:39:38 linux kernel: usb.c: registered new driver hub Oct 22 19:39:38 linux kernel: usb-uhci.c: $Revision: 1.275 $ time 13:56:25 Sep 13 2002 Oct 22 19:39:38 linux kernel: usb-uhci.c: High bandwidth mode enabled Oct 22 19:39:38 linux kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Oct 22 19:39:38 linux kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 Oct 22 19:39:38 linux kernel: SiS router pirq escape (99) Oct 22 19:39:38 linux kernel: SiS router pirq escape (99) Oct 22 19:39:38 linux kernel: usb-ohci.c: USB OHCI at membase 0xe4861000, IRQ 11 Oct 22 19:39:38 linux kernel: usb-ohci.c: usb-00:02.3, PCI device 1039:7001 Oct 22 19:39:38 linux kernel: usb.c: new USB bus registered, assigned bus number 1 Oct 22 19:39:38 linux kernel: hub.c: USB hub found Oct 22 19:39:38 linux kernel: hub.c: 3 ports detected Oct 22 19:39:38 linux kernel: PCI: Found IRQ 11 for device 00:02.2 Oct 22 19:39:38 linux kernel: usb-ohci.c: USB OHCI at membase 0xe4863000, IRQ 11 Oct 22 19:39:38 linux kernel: usb-ohci.c: usb-00:02.2, PCI device 1039:7001 Oct 22 19:39:38 linux kernel: usb.c: new USB bus registered, assigned bus number 2 Oct 22 19:39:38 linux kernel: hub.c: USB hub found Oct 22 19:39:38 linux kernel: hub.c: 3 ports detected Oct 22 19:39:38 linux kernel: hub.c: USB new device connect on bus2/1, assigned device number 2 Oct 22 19:39:38 linux kernel: usb.c: USB device 2 (vend/prod 0x1110/0x900f) is not claimed by any active driver. Oct 22 19:39:38 linux kernel: sg: find_free_slot ...<7>sg: initializing sg_major_array ...<4>sg: allocated major 21 Oct 22 19:39:38 linux kernel: sg: ... found 15:00 Oct 22 19:39:38 linux kernel: sg_attach: dev0=(21:0) Oct 22 19:39:38 linux kernel: sg: find_free_slot ...<7>sg: ... found 15:01 Oct 22 19:39:38 linux kernel: sg_attach: dev1=(21:1) Oct 22 19:39:38 linux kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Oct 22 19:39:38 linux kernel: Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 Oct 22 19:39:38 linux kernel: sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray Oct 22 19:39:38 linux kernel: Uniform CD-ROM driver Revision: 3.12 Oct 22 19:39:38 linux kernel: sr1: scsi3-mmc drive: 4x/32x writer cd/rw xa/form2 cdda tray Oct 22 19:39:38 linux kernel: usb.c: registered new driver acm Oct 22 19:39:38 linux kernel: acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters Oct 22 19:40:05 linux kernel: PCI: Found IRQ 11 for device 00:02.7 Oct 22 19:40:05 linux kernel: PCI: Sharing IRQ 11 with 00:0d.0 Oct 22 19:40:05 linux kernel: intel8x0: clocking to 48000 Oct 22 19:40:05 linux kernel: IPv6 v0.8 for NET4.0 Oct 22 19:40:05 linux kernel: IPv6 over IPv4 tunneling driver Oct 22 19:40:05 linux sshd[674]: Server listening on :: port 22. Oct 22 19:40:07 linux smpppd[720]: smpppd version 0.78 started Oct 22 19:40:10 linux /usr/sbin/cron[944]: (CRON) STARTUP (fork ok) Oct 22 19:40:14 linux /etc/hotplug/net.agent[689]: No HW description found ... exiting Oct 22 19:40:16 linux kernel: eth0: no IPv6 routers present Oct 22 19:40:16 linux kernel: isapnp: Scanning for PnP cards... Oct 22 19:40:16 linux kernel: isapnp: No Plug & Play device found Protokoll von kinternet beim Versuch einzuwählen: SuSE Meta pppd (smpppd), Version 0.78 on linux. wwwoffle not is running Selection of interface/provider "ppp0"/"1und1" succeeded. Starting connection. (2002-10-22 20:13:10 CEST) pppd: Plugin passwordfd.so loaded. pppd: Failed to open /dev/ttyACM0: Invalid argument pppd died: Serial port open failed (exit code 7)