Hi zusammen, irgendwie spinnt mein ProFTP ein bisschen rum ;( Trotz Suche in div. FAQ's und Mailinglisten habe ich keine Antwort gefunden, aber evtl. weiß ein von Euch weiter ;) Es gibt einige Diskussionen, die sich generell mit einem langsamen ProFTP beschäftigen, u. a. auch http://lists.suse.com/archive/suse-linux/2002-Jan/1813.html. Wie dort beschrieben wurde, habe ich den ProFTP per proftpd -n -d5 gestartet und bekomme jetzt die Logginginformationen: Dabei fällt auf, dass bestimmte Befehle sehr langsam abgearbeitet werden: blabla.local (10.2.3.45[10.2.3.45]) - received: CWD tools blabla.local (10.2.3.45[10.2.3.45]) - received: CWD tools blabla.local (10.2.3.45[10.2.3.45]) - received: CWD tools blabla.local (10.2.3.45[10.2.3.45]) - in dir_check_full(): path = '/home/web/dummy/cgi-bin/tools', fullpath = '/home/web/dummy/cgi-bin/tools'. blabla.local (10.2.3.45[10.2.3.45]) - received: PWD blabla.local (10.2.3.45[10.2.3.45]) - received: TYPE A blabla.local (10.2.3.45[10.2.3.45]) - received: PORT 10,2,3,45,19,47 /// bis hier ging alles innerhalb von sekundenbruchteilen, aber die nächsten 2 beefehle dauern ca. 10sec blabla.local (10.2.3.45[10.2.3.45]) - received: LIST blabla.local (10.2.3.45[10.2.3.45]) - received: LIST /// so, und der Rest geht wieder ruckzuck blabla.local (10.2.3.45[10.2.3.45]) - active data connection opened - local : 10.1.1.205:20 blabla.local (10.2.3.45[10.2.3.45]) - active data connection opened - remote : 10.2.3.45:4911 blabla.local (10.2.3.45[10.2.3.45]) - in dir_check_full(): path = '/home/web/dummy/cgi-bin/tools', fullpath = '/home/web/dummy/cgi-bin/tools'. blabla.local (10.2.3.45[10.2.3.45]) - in dir_check_full(): path = '/home/web/dummy/cgi-bin/tools/setup.pl', fullpath = '/home/web/dummy/cgi-bin/tools/setup.pl'. blabla.local (10.2.3.45[10.2.3.45]) - in dir_check_full(): path = '/home/web/dummy/cgi-bin/tools/upgrade.pl', fullpath = '/home/web/dummy/cgi-bin/tools/upgrade.pl'. Wenn ich eine Datei herunterladen will, passiert ähnliches: blabla.local (10.2.3.45[10.2.3.45]) - Transfer aborted after 0 bytes in 0.00 seconds. blabla.local (10.2.3.45[10.2.3.45]) - received: PORT 10,2,3,45,19,50 blabla.local (10.2.3.45[10.2.3.45]) - received: RETR bz2bt.pl blabla.local (10.2.3.45[10.2.3.45]) - received: RETR bz2bt.pl blabla.local (10.2.3.45[10.2.3.45]) - in dir_check_full(): path = '/home/web/dummy/cgi-bin/tools/bz2bt.pl', fullpath = '/home/web/dummy/cgi-bin/tools/bz2bt.pl'. /// bis hierhin alles sehr schnell, aber jetzt 10sec kein Reaktion blabla.local (10.2.3.45[10.2.3.45]) - received: RETR bz2bt.pl /// und der rest wieder sehr schnell: blabla.local (10.2.3.45[10.2.3.45]) - active data connection opened - local : 10.1.1.205:20 blabla.local (10.2.3.45[10.2.3.45]) - active data connection opened - remote : 10.2.3.45:4914 blabla.local (10.2.3.45[10.2.3.45]) - Transfer completed: 7979 bytes in 0.01 seconds. Das ist alles sehr verwunderlich... *grübel* Hat jmd. eine Idee ? Gruß Kay