Hallo, ich habe ein Netzwerk folgender Struktur: 192.168.100.2 192.168.100.3 usw. user02 user03 usw. | | | | | | -------------------- | ------ | | | Switch | |192.168.100.1 File-,DHCP-,Bootserver |192.168.101.2 |192.168.101.1 Internetserver mit Firewall, Masquerading, DNS |ISDN ->Internet Nunu mochte ich von den Clients ins Internet und muß fogende route Konfiguration haben: route -n #ohne DHCP Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.101.0 192.168.100.1 255.255.255.0 UG 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.101.1 0.0.0.0 UG 0 0 0 eth0 diese erhalte ich auch, wen ich kein DHCP benutze und die route.config entsprechend editiere. Aber wie schaffe ich das über DHCPD? Ich finde keine möglichkeit das NETZ 192.168.101.0 den Gateway 192.168.100.1 zuzuordnen. Der Standard-Gateway ist ja nicht das Problem (->option routers 192.168.101.1;). route -n # bei DHCP benutzung Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.101.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.101.1 0.0.0.0 UG 0 0 0 eth0 # dhcpd.conf # server-identifier boot.lin; option domain-name "lin"; option domain-name-servers 192.168.101.1; use-host-decl-names on; ubnet 192.168.100.0 netmask 255.255.255.0 { option routers 192.168.101.1; option broadcast-address 192.168.100.255; host user02 { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address user02.lin; filename "u2dos"; } #*****gekürzt********************** } #*****Ende /etc/dhcpd.conf Vielen Dank schon mal. Tschüss Frank Lintker --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com