Hallo,
ich hab gestern auf XFree86 4.0 mit den SuSE-RPM's für SuSE-Linux
6.3 (welches hier installiert ist) upgedatet und die Source-RPM's
von NVidia (ich weiss, dass die wesentlichen Teile Binary-Only
sind, mir wärs anders auch lieber, aber ich hab nun mal ne Viper
550 mit Riva-TNT, hätte gerne 3D-Unterstützung und will nicht
unbedingt ne neue GraKa kaufen NVIDIA_GLX-0.9-1.src.rprm und
NVIDIA_kernel-0.9-1.src.rpm) eingespeilt und eingespielt.
Dank Sax2 lief die Installation Problemlos (riesen Kompliment
an SuSE!!!), TrueType Schriften einzubinden ist jetzt im Gegen-
satz zu den 3.xer Servern auch kein Problem, 3D-Unterstützung
lief auch nach vorgehensweise laut NVidia-Anleitung sofort,
das Grafiktablett war problematisch, dank der Hinweise im Linux-
Magazin 5/2000, einen Blick in das wacom-Modul und etwas experi-
mentierfreudigkeit auch kein Problem. Alles ok.
Heute musste ich allerdings feststellen, dass beim allerersten
hochfahren des X-Servers (KDM, grafischer Login bei mir) Probleme
im Zusammenhang mit dem Grafiktablett auftreten.
Wenn ich kein Gerät auf dem Tablett habe (zugehörigen Stift oder
Maus), startet der X-Server, das Tablett und die Tastatur (!!!)
sind aber nicht nutzbar, die Maus geht, nach einem Restart von
X ist das Problem behoben, Tastatur, Maus und Grafiktablett
funktionieren.
Wenn ich die Wacom-Maus beim Start von X aufs Tablett drauf lege,
restartet der X-Server permanent, bis ich sie wieder runter nehme,
stell ich sie dann drauf, gibt es keine Probleme mehr, Tastatur,
Maus und Tablett funktionieren einwandfrei.
Jemand ne Idee, was das sein könnte? Ich gehe mal davon aus,
irgendwas in der Konfiguration verbockt zu haben (siehe unten).
PS: Das Problem ist sowohl mit dem XFree eigenen nv Treiber,
als auch mit dem nvidia Treiber der gleichnamigen Firma
jederzeit reproduzierbar.
PPS: Schade das blender mit dem NVIDIA-3D-Treiber (noch) nicht
laufen mag: " blender: error in loading shared libraries:
blender: undefined symbol: glXCopySubBufferMESA"
Hier noch die Differenzen von /var/log/XFree86.0.log zwischen erstem
Start (Tastatur geht nicht) und erneutem X-Start (Tastatur geht).
Die Dinger sind je > 20 KByte, ein komplettes posten würd ich der
Liste gerne ersparen, Zeilen die sich nur in der Datums-/Uhrzeit-
angabe unterscheiden lass ich mal weg.
Zeile 43 (Tastatur geht nicht):
(--) using VT number 2
Zeile 43 (Tastatur geht):
(--) using VT number 7
Zeile 66 (Tastatur geht nicht):
(II) PCI: stages = 0x03, oldVal1 = 0x80003bd0, mode1Res1 = 0x80000000
Zeile 66 (Tastatur geht):
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
Zeile 518ff (Tastatur geht nicht):
(==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060
(==) Wacom tablet model : GD-0912-R00,V1.2-7
(==) Wacom V tablet maximum X=30480 maximum Y=24060 X resolution=2540 Y resolution=2540 suppress=26 Tilt
Wacom unable to read first byte of request '~#' answer after 3 tries
(**) Option "Device" "/dev/ttyS1"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(==) Wacom tablet model : GD-0912-R00,V1.2-7
(==) Wacom V tablet maximum X=30480 maximum Y=24060 X resolution=2540 Y resolution=2540 suppress=26 Tilt
(==) Wacom tablet model : GD-0912-R00,V1.2-7
(==) Wacom V tablet maximum X=30480 maximum Y=24060 X resolution=2540 Y resolution=2540 suppress=26 Tilt
Zeile 518 (ist dort die letzte Zeile) (Tastatur geht):
(==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060
hier die /etc/X11/XF86Config:
----------------------------- schnipp -----------------------------
#--------#
# »» SaX generated XFree86 config file ««
# Copyright (c) 1996 SuSE. GmbH Fuerth, All rights reserved.
#
# Version: 4.0
# Contact: Marcus Schaefer , 1999
#
# this file has been created from SaX version 4.0
# Please do not edit this file, changes may be lost the
# next time using SaX
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc/"
# FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc/"
# FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/URW/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "speedo"
Load "extmod"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Driver "keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbKeyCodes" "xfree86"
Option "XkbLayout" "de"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/pointer0"
Option "Name" "AutoDetected"
Option "Protocol" "ps/2"
Option "Vendor" "AutoDetected"
EndSection
# Grafiktablett Beginn
Section "InputDevice"
Driver "wacom"
Identifier "Pen"
Option "Type" "stylus"
Option "Device" "/dev/ttyS1"
Option "Mode" "Absolute"
Option "Serial" "2609924610"
Option "SendCoreEvents"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "PenRadierer"
Option "Type" "eraser"
Option "Device" "/dev/ttyS1"
Option "Mode" "Absolute"
Option "Serial" "2609924610"
Option "SendCoreEvents"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "StrokePen"
Option "Type" "stylus"
Option "Device" "/dev/ttyS1"
Option "Mode" "Absolute"
Option "Serial" "2569011201"
Option "SendCoreEvents"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "Airbrush"
Option "Type" "stylus"
Option "Device" "/dev/ttyS1"
Option "Mode" "Absolute"
Option "Serial" "3207594497"
Option "SendCoreEvents"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "AirbrushRadierer"
Option "Type" "eraser"
Option "Device" "/dev/ttyS1"
Option "Mode" "Absolute"
Option "Serial" "3207594497"
Option "SendCoreEvents"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "Maus"
Option "Type" "cursor"
Option "Device" "/dev/ttyS1"
Option "Mode" "Absolute"
Option "Serial" "2577400832"
Option "SendCoreEvents"
EndSection
# Grafiktablett Ende
Section "Monitor"
HorizSync 37-86
Identifier "Monitor[0]"
ModelName "Vision Master 17"
VendorName "Iiyama"
VertRefresh 50-120
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "800x600" 71.91 800 888 1008 1048 600 612 622 648
Modeline "1152x864" 121.87 1152 1192 1328 1520 864 881 893 919
Modeline "640x480" 25.10 640 656 752 832 480 490 494 522
Modeline "640x480" 29.29 640 664 776 832 480 490 495 522
Modeline "640x480" 33.47 640 648 760 832 480 490 496 522
Modeline "640x480" 37.65 640 648 760 832 480 490 497 522
Modeline "640x480" 41.84 640 656 760 832 480 490 497 522
Modeline "640x480" 46.02 640 656 760 832 480 490 498 522
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1152x864" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "800x600"
EndSubSection
SubSection "Display"
Depth 32
Modes "1152x864" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "RivaTNT"
BusID "1:0:0"
# Driver "nv"
Driver "nvidia"
Identifier "Device[0]"
VendorName "Nvidia"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
# Grafiktablett Start
InputDevice "Pen"
InputDevice "PenRadierer"
InputDevice "StrokePen"
InputDevice "Airbrush"
InputDevice "AirbrushRadierer"
InputDevice "Maus"
# Grafiktablett Ende
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
----------------------------- schnapp -----------------------------
--
Machs gut | http://www.iiv.de/schwinde/buerger/tremmel/
| http://www.knightsoft.de
Manfred | http://www.knightsoft-net.de
---------------------------------------------------------------------
To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com
For additional commands, e-mail: suse-linux-help@suse.com