Hello community,
here is the log from the commit of package fontinfo for openSUSE:Factory checked in at 2016-05-05 08:13:08
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/fontinfo (Old)
and /work/SRC/openSUSE:Factory/.fontinfo.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "fontinfo"
Changes:
--------
--- /work/SRC/openSUSE:Factory/fontinfo/fontinfo.changes 2015-04-12 00:10:39.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.fontinfo.new/fontinfo.changes 2016-05-05 08:13:10.000000000 +0200
@@ -1,0 +2,6 @@
+Wed Apr 27 09:00:46 UTC 2016 - pgajdos@suse.com
+
+- updated to version 20160427
+ * ycp: added more recent distros, remove old
+
+-------------------------------------------------------------------
Old:
----
fontinfo-20150410.tar.bz2
New:
----
fontinfo.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ fontinfo.spec ++++++
--- /var/tmp/diff_new_pack.DWJ1WB/_old 2016-05-05 08:13:10.000000000 +0200
+++ /var/tmp/diff_new_pack.DWJ1WB/_new 2016-05-05 08:13:10.000000000 +0200
@@ -1,7 +1,7 @@
#
# spec file for package fontinfo
#
-# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany.
+# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,13 +17,13 @@
Name: fontinfo
-Version: 20150410
+Version: 20160427
Release: 0
Summary: Overview of Installed Fonts
License: GPL-2.0+
Group: Productivity/Publishing/Other
Url: https://github.com/pgajdos/fontinfo/
-Source: %{name}-%{version}.tar.bz2
+Source: %{name}.tar.bz2
# discount for THANKS.md -> thanks.txt
BuildRequires: discount
BuildRequires: fontconfig-devel
@@ -45,7 +45,7 @@
and see differences.
%prep
-%setup -q
+%setup -q -n %{name}
%build
make CFLAGS="%{optflags}" %{?_smp_mflags}
++++++ fontinfo-20150410.tar.bz2 -> fontinfo.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/COMMIT_EDITMSG new/fontinfo/.git/COMMIT_EDITMSG
--- old/fontinfo-20150410/.git/COMMIT_EDITMSG 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/COMMIT_EDITMSG 2016-04-27 10:57:49.000000000 +0200
@@ -0,0 +1 @@
+ycp: add more recent distros, remove old
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/HEAD new/fontinfo/.git/HEAD
--- old/fontinfo-20150410/.git/HEAD 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/HEAD 2016-04-27 10:52:57.000000000 +0200
@@ -0,0 +1 @@
+ref: refs/heads/master
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/config new/fontinfo/.git/config
--- old/fontinfo-20150410/.git/config 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/config 2016-04-27 10:52:57.000000000 +0200
@@ -0,0 +1,11 @@
+[core]
+ repositoryformatversion = 0
+ filemode = true
+ bare = false
+ logallrefupdates = true
+[remote "origin"]
+ url = https://github.com/pgajdos/fontinfo.git
+ fetch = +refs/heads/*:refs/remotes/origin/*
+[branch "master"]
+ remote = origin
+ merge = refs/heads/master
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/description new/fontinfo/.git/description
--- old/fontinfo-20150410/.git/description 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/description 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1 @@
+Unnamed repository; edit this file 'description' to name the repository.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/applypatch-msg.sample new/fontinfo/.git/hooks/applypatch-msg.sample
--- old/fontinfo-20150410/.git/hooks/applypatch-msg.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/applypatch-msg.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,15 @@
+#!/bin/sh
+#
+# An example hook script to check the commit log message taken by
+# applypatch from an e-mail message.
+#
+# The hook should exit with non-zero status after issuing an
+# appropriate message if it wants to stop the commit. The hook is
+# allowed to edit the commit message file.
+#
+# To enable this hook, rename this file to "applypatch-msg".
+
+. git-sh-setup
+commitmsg="$(git rev-parse --git-path hooks/commit-msg)"
+test -x "$commitmsg" && exec "$commitmsg" ${1+"$@"}
+:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/commit-msg.sample new/fontinfo/.git/hooks/commit-msg.sample
--- old/fontinfo-20150410/.git/hooks/commit-msg.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/commit-msg.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,24 @@
+#!/bin/sh
+#
+# An example hook script to check the commit log message.
+# Called by "git commit" with one argument, the name of the file
+# that has the commit message. The hook should exit with non-zero
+# status after issuing an appropriate message if it wants to stop the
+# commit. The hook is allowed to edit the commit message file.
+#
+# To enable this hook, rename this file to "commit-msg".
+
+# Uncomment the below to add a Signed-off-by line to the message.
+# Doing this in a hook is a bad idea in general, but the prepare-commit-msg
+# hook is more suited to it.
+#
+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
+
+# This example catches duplicate Signed-off-by lines.
+
+test "" = "$(grep '^Signed-off-by: ' "$1" |
+ sort | uniq -c | sed -e '/^[ ]*1[ ]/d')" || {
+ echo >&2 Duplicate Signed-off-by lines.
+ exit 1
+}
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/post-update.sample new/fontinfo/.git/hooks/post-update.sample
--- old/fontinfo-20150410/.git/hooks/post-update.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/post-update.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,8 @@
+#!/bin/sh
+#
+# An example hook script to prepare a packed repository for use over
+# dumb transports.
+#
+# To enable this hook, rename this file to "post-update".
+
+exec git update-server-info
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/pre-applypatch.sample new/fontinfo/.git/hooks/pre-applypatch.sample
--- old/fontinfo-20150410/.git/hooks/pre-applypatch.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/pre-applypatch.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,14 @@
+#!/bin/sh
+#
+# An example hook script to verify what is about to be committed
+# by applypatch from an e-mail message.
+#
+# The hook should exit with non-zero status after issuing an
+# appropriate message if it wants to stop the commit.
+#
+# To enable this hook, rename this file to "pre-applypatch".
+
+. git-sh-setup
+precommit="$(git rev-parse --git-path hooks/pre-commit)"
+test -x "$precommit" && exec "$precommit" ${1+"$@"}
+:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/pre-commit.sample new/fontinfo/.git/hooks/pre-commit.sample
--- old/fontinfo-20150410/.git/hooks/pre-commit.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/pre-commit.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# An example hook script to verify what is about to be committed.
+# Called by "git commit" with no arguments. The hook should
+# exit with non-zero status after issuing an appropriate message if
+# it wants to stop the commit.
+#
+# To enable this hook, rename this file to "pre-commit".
+
+if git rev-parse --verify HEAD >/dev/null 2>&1
+then
+ against=HEAD
+else
+ # Initial commit: diff against an empty tree object
+ against=4b825dc642cb6eb9a060e54bf8d69288fbee4904
+fi
+
+# If you want to allow non-ASCII filenames set this variable to true.
+allownonascii=$(git config --bool hooks.allownonascii)
+
+# Redirect output to stderr.
+exec 1>&2
+
+# Cross platform projects tend to avoid non-ASCII filenames; prevent
+# them from being added to the repository. We exploit the fact that the
+# printable range starts at the space character and ends with tilde.
+if [ "$allownonascii" != "true" ] &&
+ # Note that the use of brackets around a tr range is ok here, (it's
+ # even required, for portability to Solaris 10's /usr/bin/tr), since
+ # the square bracket bytes happen to fall in the designated range.
+ test $(git diff --cached --name-only --diff-filter=A -z $against |
+ LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
+then
+ cat <<\EOF
+Error: Attempt to add a non-ASCII file name.
+
+This can cause problems if you want to work with people on other platforms.
+
+To be portable it is advisable to rename the file.
+
+If you know what you are doing you can disable this check using:
+
+ git config hooks.allownonascii true
+EOF
+ exit 1
+fi
+
+# If there are whitespace errors, print the offending file names and fail.
+exec git diff-index --check --cached $against --
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/pre-push.sample new/fontinfo/.git/hooks/pre-push.sample
--- old/fontinfo-20150410/.git/hooks/pre-push.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/pre-push.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# An example hook script to verify what is about to be pushed. Called by "git
+# push" after it has checked the remote status, but before anything has been
+# pushed. If this script exits with a non-zero status nothing will be pushed.
+#
+# This hook is called with the following parameters:
+#
+# $1 -- Name of the remote to which the push is being done
+# $2 -- URL to which the push is being done
+#
+# If pushing without using a named remote those arguments will be equal.
+#
+# Information about the commits which are being pushed is supplied as lines to
+# the standard input in the form:
+#
+# <local ref> <local sha1> <remote ref> <remote sha1>
+#
+# This sample shows how to prevent push of commits where the log message starts
+# with "WIP" (work in progress).
+
+remote="$1"
+url="$2"
+
+z40=0000000000000000000000000000000000000000
+
+while read local_ref local_sha remote_ref remote_sha
+do
+ if [ "$local_sha" = $z40 ]
+ then
+ # Handle delete
+ :
+ else
+ if [ "$remote_sha" = $z40 ]
+ then
+ # New branch, examine all commits
+ range="$local_sha"
+ else
+ # Update to existing branch, examine new commits
+ range="$remote_sha..$local_sha"
+ fi
+
+ # Check for WIP commit
+ commit=`git rev-list -n 1 --grep '^WIP' "$range"`
+ if [ -n "$commit" ]
+ then
+ echo >&2 "Found WIP commit in $local_ref, not pushing"
+ exit 1
+ fi
+ fi
+done
+
+exit 0
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/pre-rebase.sample new/fontinfo/.git/hooks/pre-rebase.sample
--- old/fontinfo-20150410/.git/hooks/pre-rebase.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/pre-rebase.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,169 @@
+#!/bin/sh
+#
+# Copyright (c) 2006, 2008 Junio C Hamano
+#
+# The "pre-rebase" hook is run just before "git rebase" starts doing
+# its job, and can prevent the command from running by exiting with
+# non-zero status.
+#
+# The hook is called with the following parameters:
+#
+# $1 -- the upstream the series was forked from.
+# $2 -- the branch being rebased (or empty when rebasing the current branch).
+#
+# This sample shows how to prevent topic branches that are already
+# merged to 'next' branch from getting rebased, because allowing it
+# would result in rebasing already published history.
+
+publish=next
+basebranch="$1"
+if test "$#" = 2
+then
+ topic="refs/heads/$2"
+else
+ topic=`git symbolic-ref HEAD` ||
+ exit 0 ;# we do not interrupt rebasing detached HEAD
+fi
+
+case "$topic" in
+refs/heads/??/*)
+ ;;
+*)
+ exit 0 ;# we do not interrupt others.
+ ;;
+esac
+
+# Now we are dealing with a topic branch being rebased
+# on top of master. Is it OK to rebase it?
+
+# Does the topic really exist?
+git show-ref -q "$topic" || {
+ echo >&2 "No such branch $topic"
+ exit 1
+}
+
+# Is topic fully merged to master?
+not_in_master=`git rev-list --pretty=oneline ^master "$topic"`
+if test -z "$not_in_master"
+then
+ echo >&2 "$topic is fully merged to master; better remove it."
+ exit 1 ;# we could allow it, but there is no point.
+fi
+
+# Is topic ever merged to next? If so you should not be rebasing it.
+only_next_1=`git rev-list ^master "^$topic" ${publish} | sort`
+only_next_2=`git rev-list ^master ${publish} | sort`
+if test "$only_next_1" = "$only_next_2"
+then
+ not_in_topic=`git rev-list "^$topic" master`
+ if test -z "$not_in_topic"
+ then
+ echo >&2 "$topic is already up-to-date with master"
+ exit 1 ;# we could allow it, but there is no point.
+ else
+ exit 0
+ fi
+else
+ not_in_next=`git rev-list --pretty=oneline ^${publish} "$topic"`
+ /usr/bin/perl -e '
+ my $topic = $ARGV[0];
+ my $msg = "* $topic has commits already merged to public branch:\n";
+ my (%not_in_next) = map {
+ /^([0-9a-f]+) /;
+ ($1 => 1);
+ } split(/\n/, $ARGV[1]);
+ for my $elem (map {
+ /^([0-9a-f]+) (.*)$/;
+ [$1 => $2];
+ } split(/\n/, $ARGV[2])) {
+ if (!exists $not_in_next{$elem->[0]}) {
+ if ($msg) {
+ print STDERR $msg;
+ undef $msg;
+ }
+ print STDERR " $elem->[1]\n";
+ }
+ }
+ ' "$topic" "$not_in_next" "$not_in_master"
+ exit 1
+fi
+
+exit 0
+
+################################################################
+
+This sample hook safeguards topic branches that have been
+published from being rewound.
+
+The workflow assumed here is:
+
+ * Once a topic branch forks from "master", "master" is never
+ merged into it again (either directly or indirectly).
+
+ * Once a topic branch is fully cooked and merged into "master",
+ it is deleted. If you need to build on top of it to correct
+ earlier mistakes, a new topic branch is created by forking at
+ the tip of the "master". This is not strictly necessary, but
+ it makes it easier to keep your history simple.
+
+ * Whenever you need to test or publish your changes to topic
+ branches, merge them into "next" branch.
+
+The script, being an example, hardcodes the publish branch name
+to be "next", but it is trivial to make it configurable via
+$GIT_DIR/config mechanism.
+
+With this workflow, you would want to know:
+
+(1) ... if a topic branch has ever been merged to "next". Young
+ topic branches can have stupid mistakes you would rather
+ clean up before publishing, and things that have not been
+ merged into other branches can be easily rebased without
+ affecting other people. But once it is published, you would
+ not want to rewind it.
+
+(2) ... if a topic branch has been fully merged to "master".
+ Then you can delete it. More importantly, you should not
+ build on top of it -- other people may already want to
+ change things related to the topic as patches against your
+ "master", so if you need further changes, it is better to
+ fork the topic (perhaps with the same name) afresh from the
+ tip of "master".
+
+Let's look at this example:
+
+ o---o---o---o---o---o---o---o---o---o "next"
+ / / / /
+ / a---a---b A / /
+ / / / /
+ / / c---c---c---c B /
+ / / / \ /
+ / / / b---b C \ /
+ / / / / \ /
+ ---o---o---o---o---o---o---o---o---o---o---o "master"
+
+
+A, B and C are topic branches.
+
+ * A has one fix since it was merged up to "next".
+
+ * B has finished. It has been fully merged up to "master" and "next",
+ and is ready to be deleted.
+
+ * C has not merged to "next" at all.
+
+We would want to allow C to be rebased, refuse A, and encourage
+B to be deleted.
+
+To compute (1):
+
+ git rev-list ^master ^topic next
+ git rev-list ^master next
+
+ if these match, topic has not merged in next at all.
+
+To compute (2):
+
+ git rev-list master..topic
+
+ if this is empty, it is fully merged to "master".
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/prepare-commit-msg.sample new/fontinfo/.git/hooks/prepare-commit-msg.sample
--- old/fontinfo-20150410/.git/hooks/prepare-commit-msg.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/prepare-commit-msg.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# An example hook script to prepare the commit log message.
+# Called by "git commit" with the name of the file that has the
+# commit message, followed by the description of the commit
+# message's source. The hook's purpose is to edit the commit
+# message file. If the hook fails with a non-zero status,
+# the commit is aborted.
+#
+# To enable this hook, rename this file to "prepare-commit-msg".
+
+# This hook includes three examples. The first comments out the
+# "Conflicts:" part of a merge commit.
+#
+# The second includes the output of "git diff --name-status -r"
+# into the message, just before the "git status" output. It is
+# commented because it doesn't cope with --amend or with squashed
+# commits.
+#
+# The third example adds a Signed-off-by line to the message, that can
+# still be edited. This is rarely a good idea.
+
+case "$2,$3" in
+ merge,)
+ /usr/bin/perl -i.bak -ne 's/^/# /, s/^# #/#/ if /^Conflicts/ .. /#/; print' "$1" ;;
+
+# ,|template,)
+# /usr/bin/perl -i.bak -pe '
+# print "\n" . `git diff --cached --name-status -r`
+# if /^#/ && $first++ == 0' "$1" ;;
+
+ *) ;;
+esac
+
+# SOB=$(git var GIT_AUTHOR_IDENT | sed -n 's/^\(.*>\).*$/Signed-off-by: \1/p')
+# grep -qs "^$SOB" "$1" || echo "$SOB" >> "$1"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/hooks/update.sample new/fontinfo/.git/hooks/update.sample
--- old/fontinfo-20150410/.git/hooks/update.sample 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/hooks/update.sample 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,128 @@
+#!/bin/sh
+#
+# An example hook script to block unannotated tags from entering.
+# Called by "git receive-pack" with arguments: refname sha1-old sha1-new
+#
+# To enable this hook, rename this file to "update".
+#
+# Config
+# ------
+# hooks.allowunannotated
+# This boolean sets whether unannotated tags will be allowed into the
+# repository. By default they won't be.
+# hooks.allowdeletetag
+# This boolean sets whether deleting tags will be allowed in the
+# repository. By default they won't be.
+# hooks.allowmodifytag
+# This boolean sets whether a tag may be modified after creation. By default
+# it won't be.
+# hooks.allowdeletebranch
+# This boolean sets whether deleting branches will be allowed in the
+# repository. By default they won't be.
+# hooks.denycreatebranch
+# This boolean sets whether remotely creating branches will be denied
+# in the repository. By default this is allowed.
+#
+
+# --- Command line
+refname="$1"
+oldrev="$2"
+newrev="$3"
+
+# --- Safety check
+if [ -z "$GIT_DIR" ]; then
+ echo "Don't run this script from the command line." >&2
+ echo " (if you want, you could supply GIT_DIR then run" >&2
+ echo " $0 <ref> <oldrev> <newrev>)" >&2
+ exit 1
+fi
+
+if [ -z "$refname" -o -z "$oldrev" -o -z "$newrev" ]; then
+ echo "usage: $0 <ref> <oldrev> <newrev>" >&2
+ exit 1
+fi
+
+# --- Config
+allowunannotated=$(git config --bool hooks.allowunannotated)
+allowdeletebranch=$(git config --bool hooks.allowdeletebranch)
+denycreatebranch=$(git config --bool hooks.denycreatebranch)
+allowdeletetag=$(git config --bool hooks.allowdeletetag)
+allowmodifytag=$(git config --bool hooks.allowmodifytag)
+
+# check for no description
+projectdesc=$(sed -e '1q' "$GIT_DIR/description")
+case "$projectdesc" in
+"Unnamed repository"* | "")
+ echo "*** Project description file hasn't been set" >&2
+ exit 1
+ ;;
+esac
+
+# --- Check types
+# if $newrev is 0000...0000, it's a commit to delete a ref.
+zero="0000000000000000000000000000000000000000"
+if [ "$newrev" = "$zero" ]; then
+ newrev_type=delete
+else
+ newrev_type=$(git cat-file -t $newrev)
+fi
+
+case "$refname","$newrev_type" in
+ refs/tags/*,commit)
+ # un-annotated tag
+ short_refname=${refname##refs/tags/}
+ if [ "$allowunannotated" != "true" ]; then
+ echo "*** The un-annotated tag, $short_refname, is not allowed in this repository" >&2
+ echo "*** Use 'git tag [ -a | -s ]' for tags you want to propagate." >&2
+ exit 1
+ fi
+ ;;
+ refs/tags/*,delete)
+ # delete tag
+ if [ "$allowdeletetag" != "true" ]; then
+ echo "*** Deleting a tag is not allowed in this repository" >&2
+ exit 1
+ fi
+ ;;
+ refs/tags/*,tag)
+ # annotated tag
+ if [ "$allowmodifytag" != "true" ] && git rev-parse $refname > /dev/null 2>&1
+ then
+ echo "*** Tag '$refname' already exists." >&2
+ echo "*** Modifying a tag is not allowed in this repository." >&2
+ exit 1
+ fi
+ ;;
+ refs/heads/*,commit)
+ # branch
+ if [ "$oldrev" = "$zero" -a "$denycreatebranch" = "true" ]; then
+ echo "*** Creating a branch is not allowed in this repository" >&2
+ exit 1
+ fi
+ ;;
+ refs/heads/*,delete)
+ # delete branch
+ if [ "$allowdeletebranch" != "true" ]; then
+ echo "*** Deleting a branch is not allowed in this repository" >&2
+ exit 1
+ fi
+ ;;
+ refs/remotes/*,commit)
+ # tracking branch
+ ;;
+ refs/remotes/*,delete)
+ # delete tracking branch
+ if [ "$allowdeletebranch" != "true" ]; then
+ echo "*** Deleting a tracking branch is not allowed in this repository" >&2
+ exit 1
+ fi
+ ;;
+ *)
+ # Anything else (is there anything else?)
+ echo "*** Update hook: unknown type of update to ref $refname of type $newrev_type" >&2
+ exit 1
+ ;;
+esac
+
+# --- Finished
+exit 0
Files old/fontinfo-20150410/.git/index and new/fontinfo/.git/index differ
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/info/exclude new/fontinfo/.git/info/exclude
--- old/fontinfo-20150410/.git/info/exclude 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/info/exclude 2016-04-27 10:52:55.000000000 +0200
@@ -0,0 +1,6 @@
+# git ls-files --others --exclude-from=.git/info/exclude
+# Lines that start with '#' are comments.
+# For a project mostly in C, the following would be a good set of
+# exclude patterns (uncomment them if you want to use them):
+# *.[oa]
+# *~
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/fontinfo-20150410/.git/logs/HEAD new/fontinfo/.git/logs/HEAD
--- old/fontinfo-20150410/.git/logs/HEAD 1970-01-01 01:00:00.000000000 +0100
+++ new/fontinfo/.git/logs/HEAD 2016-04-27 10:57:49.000000000 +0200
@@ -0,0 +1,2 @@
+0000000000000000000000000000000000000000 988d1000d9b011ee63e6e5650c79d469dd522f5a Petr Gajdos