Hello community,
here is the log from the commit of package xorg-x11-proto-devel for openSUSE:Factory checked in at 2014-04-01 06:46:28
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/xorg-x11-proto-devel (Old)
and /work/SRC/openSUSE:Factory/.xorg-x11-proto-devel.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xorg-x11-proto-devel"
Changes:
--------
--- /work/SRC/openSUSE:Factory/xorg-x11-proto-devel/xorg-x11-proto-devel.changes 2014-03-22 19:46:04.000000000 +0100
+++ /work/SRC/openSUSE:Factory/.xorg-x11-proto-devel.new/xorg-x11-proto-devel.changes 2014-04-01 06:46:31.000000000 +0200
@@ -1,0 +2,5 @@
+Sat Mar 29 01:16:53 UTC 2014 - tobias.johannes.klausmann@mni.thm.de
+
+- Update util-macros to version 1.19.0
+
+-------------------------------------------------------------------
Old:
----
util-macros-1.18.0.tar.bz2
New:
----
util-macros-1.19.0.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ xorg-x11-proto-devel.spec ++++++
--- /var/tmp/diff_new_pack.X1BudK/_old 2014-04-01 06:46:33.000000000 +0200
+++ /var/tmp/diff_new_pack.X1BudK/_new 2014-04-01 06:46:33.000000000 +0200
@@ -57,7 +57,7 @@
Source15: http://xorg.freedesktop.org/releases/individual/proto/resourceproto-1.2.0.ta...
Source16: http://xorg.freedesktop.org/releases/individual/proto/scrnsaverproto-1.2.2.t...
Source17: http://xorg.freedesktop.org/releases/individual/proto/trapproto-3.4.3.tar.bz...
-Source18: http://xorg.freedesktop.org/releases/individual/util/util-macros-1.18.0.tar....
+Source18: http://xorg.freedesktop.org/releases/individual/util/util-macros-1.19.0.tar....
Source19: http://xorg.freedesktop.org/releases/individual/proto/videoproto-2.3.1.tar.b...
Source20: http://xorg.freedesktop.org/releases/individual/proto/windowswmproto-1.0.4.t...
Source21: http://xorg.freedesktop.org/releases/individual/proto/xcmiscproto-1.2.2.tar....
++++++ util-macros-1.18.0.tar.bz2 -> util-macros-1.19.0.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/ChangeLog new/util-macros-1.19.0/ChangeLog
--- old/util-macros-1.18.0/ChangeLog 2013-12-03 16:20:46.000000000 +0100
+++ new/util-macros-1.19.0/ChangeLog 2014-03-27 14:22:08.000000000 +0100
@@ -1,3 +1,88 @@
+commit 9a54b858601bd305de2737b06e609084a2a114c2
+Author: Gaetan Nadon
+Date: Thu Mar 27 09:10:01 2014 -0400
+
+ Version bump: 1.19.0
+
+ Signed-off-by: Gaetan Nadon
+
+commit 0677da7ed48f74a54f9bfd12afea7f0d578d7d38
+Author: Hans de Goede
+Date: Thu Mar 27 12:45:43 2014 +0100
+
+ XORG_PROG_RAWCPP: Add TRADITIONALCPPFLAGS
+
+ In some cases we may want to have -traditional for proper whitespace preserving
+ without -undef, as we actually want the system definitions to be in place
+ so we can #ifdef on them. IE in xinit various .cpp files contain things like
+ #ifdef __APPLE__ and #ifdef __linux__
+
+ So this patch adds a TRADITIONALCPPFLAGS variable which contains just
+ -traditional where applicable without the other RAWCPPFLAGS for unsetting
+ the system definitions.
+
+ Signed-off-by: Hans de Goede
+ Reviewed-by: Gaetan Nadon
+
+commit 6768f12b4db660bb691337c6d238a32aae0475ff
+Author: Gaetan Nadon
+Date: Thu Mar 27 08:21:51 2014 -0400
+
+ Provide the automake INSTALL file at level 1.11
+
+ Now that the minimum level for automake is 1.11, replace the current
+ INSTALL with the one from automake 1.11.
+
+ Recall that the file in this package is installed in $pkgdatadir
+ and is copied by each xorg module through the make 'dist' target.
+
+ Signed-off-by: Gaetan Nadon
+
+commit 7acde944f40dad08fa8c43bc2548205e343afcd1
+Author: Arnaud Fontaine
+Date: Sat Feb 8 10:31:39 2014 -0500
+
+ Add XORG_WITH_M4 macro
+
+ Originally from XCB, this macro checks for the presence of m4 or gm4
+ which supports -I dir.
+
+ The AC_PATH_PROGS_FEATURE_CHECK autoconf macro requires autoconf 2.62.
+
+ Signed-off-by: Gaetan Nadon
+
+commit a5092b6a9931c8a60813f4f8a038cc5d9771d212
+Author: Gaetan Nadon
+Date: Thu Feb 6 17:47:20 2014 -0500
+
+ Bump minimum Autoconf required version to 2.62
+
+ The main motivation is to catch-up with the development reality and
+ allow use of features in Autoconf 2.62 as well as Automake 1.11.
+
+ As usual this means no features found only in versions above those
+ specified are allowed.
+
+ This is implementing the policy change which is described in:
+ http://www.x.org/wiki/Building_the_X_Window_System/?updated#index2h3
+
+ Discussion on xorg minimum autotools requirements:
+ http://lists.x.org/archives/xorg-devel/2013-October/038325.html
+
+ Signed-off-by: Gaetan Nadon
+
+commit 72b211419977a211c871232d66e1a668e3cf702f
+Author: Alan Coopersmith
+Date: Mon Dec 2 16:41:45 2013 -0800
+
+ XORG_COMPILER_FLAGS: Add -Wlogical-op to default warning set
+
+ We've fixed several bugs it uncovered already, only one warning left that
+ it adds in a default build.
+
+ Signed-off-by: Alan Coopersmith
+ Reviewed-by: Gaetan Nadon
+
commit 9bc8e154e53ee0ff8d09cc621ba762486f3e93fa
Author: Gaetan Nadon
Date: Mon Dec 2 18:43:36 2013 -0500
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/INSTALL new/util-macros-1.19.0/INSTALL
--- old/util-macros-1.18.0/INSTALL 2009-11-07 15:34:49.000000000 +0100
+++ new/util-macros-1.19.0/INSTALL 2012-04-02 19:37:09.000000000 +0200
@@ -1,11 +1,13 @@
Installation Instructions
*************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
Basic Installation
==================
@@ -13,7 +15,11 @@
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -42,7 +48,7 @@
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
-The simplest way to compile this package is:
+ The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
@@ -53,12 +59,22 @@
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
- the package.
+ the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
- documentation.
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
- 5. You can remove the program binaries and object files from the
+ 6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
@@ -67,8 +83,15 @@
all sorts of other programs in order to regenerate files that came
with the distribution.
- 6. Often, you can also type `make uninstall' to remove the installed
- files again.
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
Compilers and Options
=====================
@@ -93,7 +116,8 @@
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
@@ -120,7 +144,8 @@
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
@@ -131,15 +156,46 @@
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-Optional Features
-=================
-
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@@ -152,6 +208,13 @@
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
Particular systems
==================
@@ -159,10 +222,15 @@
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
- ./configure CC="cc -Ae"
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
@@ -174,6 +242,16 @@
./configure CC="cc -nodtk"
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
Specifying the System Type
==========================
@@ -189,7 +267,8 @@
where SYSTEM can have one of these forms:
- OS KERNEL-OS
+ OS
+ KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
@@ -277,7 +356,7 @@
`configure' can determine that directory automatically.
`--prefix=DIR'
- Use DIR as the installation prefix. *Note Installation Names::
+ Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/configure new/util-macros-1.19.0/configure
--- old/util-macros-1.18.0/configure 2013-12-03 15:52:35.000000000 +0100
+++ new/util-macros-1.19.0/configure 2014-03-27 14:11:05.000000000 +0100
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for util-macros 1.18.0.
+# Generated by GNU Autoconf 2.68 for util-macros 1.19.0.
#
# Report bugs to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg.
#
@@ -560,8 +560,8 @@
# Identity of this package.
PACKAGE_NAME='util-macros'
PACKAGE_TARNAME='util-macros'
-PACKAGE_VERSION='1.18.0'
-PACKAGE_STRING='util-macros 1.18.0'
+PACKAGE_VERSION='1.19.0'
+PACKAGE_STRING='util-macros 1.19.0'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
PACKAGE_URL=''
@@ -1179,7 +1179,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures util-macros 1.18.0 to adapt to many kinds of systems.
+\`configure' configures util-macros 1.19.0 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1245,7 +1245,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of util-macros 1.18.0:";;
+ short | recursive ) echo "Configuration of util-macros 1.19.0:";;
esac
cat <<\_ACEOF
@@ -1312,7 +1312,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-util-macros configure 1.18.0
+util-macros configure 1.19.0
generated by GNU Autoconf 2.68
Copyright (C) 2010 Free Software Foundation, Inc.
@@ -1329,7 +1329,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by util-macros $as_me 1.18.0, which was
+It was created by util-macros $as_me 1.19.0, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ $0 $@
@@ -2145,7 +2145,7 @@
# Define the identity of the package.
PACKAGE='util-macros'
- VERSION='1.18.0'
+ VERSION='1.19.0'
cat >>confdefs.h <<_ACEOF
@@ -2799,7 +2799,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by util-macros $as_me 1.18.0, which was
+This file was extended by util-macros $as_me 1.19.0, which was
generated by GNU Autoconf 2.68. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -2852,7 +2852,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-util-macros config.status 1.18.0
+util-macros config.status 1.19.0
configured by $0, generated by GNU Autoconf 2.68,
with options \\"\$ac_cs_config\\"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/configure.ac new/util-macros-1.19.0/configure.ac
--- old/util-macros-1.18.0/configure.ac 2013-12-03 15:42:47.000000000 +0100
+++ new/util-macros-1.19.0/configure.ac 2014-03-27 14:09:06.000000000 +0100
@@ -21,9 +21,9 @@
dnl
dnl Process this file with autoconf to create configure.
-AC_PREREQ([2.60])
+AC_PREREQ([2.62])
AC_INIT([util-macros],
- [1.18.0],
+ [1.19.0],
[https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
[util-macros])
AC_CONFIG_SRCDIR([Makefile.am])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/util-macros-1.18.0/xorg-macros.m4.in new/util-macros-1.19.0/xorg-macros.m4.in
--- old/util-macros-1.18.0/xorg-macros.m4.in 2013-12-03 00:10:29.000000000 +0100
+++ new/util-macros-1.19.0/xorg-macros.m4.in 2014-03-27 13:56:56.000000000 +0100
@@ -87,6 +87,7 @@
AC_MSG_RESULT([no])
else
if test `${RAWCPP} -traditional < conftest.$ac_ext | grep -c 'preserve \"'` -eq 1 ; then
+ TRADITIONALCPPFLAGS="-traditional"
RAWCPPFLAGS="${RAWCPPFLAGS} -traditional"
AC_MSG_RESULT([yes])
else
@@ -95,6 +96,7 @@
fi
rm -f conftest.$ac_ext
AC_SUBST(RAWCPPFLAGS)
+AC_SUBST(TRADITIONALCPPFLAGS)
]) # XORG_PROG_RAWCPP
# XORG_MANPAGE_SECTIONS()
@@ -882,6 +884,29 @@
AM_CONDITIONAL([HAVE_FOP], [test "$have_fop" = yes])
]) # XORG_WITH_FOP
+# XORG_WITH_M4([MIN-VERSION])
+# ---------------------------
+# Minimum version: 1.19.0
+#
+# This macro attempts to locate an m4 macro processor which supports
+# -I option and is only useful for modules relying on M4 in order to
+# expand macros in source code files.
+#
+# Interface to module:
+# M4: returns the path of the m4 program found
+# returns the path set by the user in the environment
+#
+AC_DEFUN([XORG_WITH_M4], [
+AC_CACHE_CHECK([for m4 that supports -I option], [ac_cv_path_M4],
+ [AC_PATH_PROGS_FEATURE_CHECK([M4], [m4 gm4],
+ [[$ac_path_M4 -I. /dev/null > /dev/null 2>&1 && \
+ ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:]],
+ [AC_MSG_ERROR([could not find m4 that supports -I option])],
+ [$PATH:/usr/gnu/bin])])
+
+AC_SUBST([M4], [$ac_cv_path_M4])
+]) # XORG_WITH_M4
+
# XORG_WITH_PS2PDF([DEFAULT])
# ----------------
# Minimum version: 1.6.0
@@ -1650,11 +1675,11 @@
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-noreturn])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wmissing-format-attribute])
XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wredundant-decls])
+XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wlogical-op])
# These are currently disabled because they are noisy. They will be enabled
# in the future once the codebase is sufficiently modernized to silence
# them. For now, I don't want them to drown out the other warnings.
-# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wlogical-op])
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wparentheses])
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wcast-align])
# XORG_TESTSET_CFLAG([[BASE_]PREFIX[FLAGS]], [-Wcast-qual])
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org