Hello community, here is the log from the commit of package perl-Net-IDN-Encode for openSUSE:Factory checked in at 2013-08-01 15:58:51 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/perl-Net-IDN-Encode (Old) and /work/SRC/openSUSE:Factory/.perl-Net-IDN-Encode.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "perl-Net-IDN-Encode" Changes: -------- --- /work/SRC/openSUSE:Factory/perl-Net-IDN-Encode/perl-Net-IDN-Encode.changes 2012-03-05 18:01:08.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.perl-Net-IDN-Encode.new/perl-Net-IDN-Encode.changes 2013-08-01 15:58:52.000000000 +0200 @@ -1,0 +2,40 @@ +Tue Jul 30 04:54:38 UTC 2013 - coolo@suse.com + +- updated to 2.003 + - FIXES required version of Unicode::Normalize in UTS46.pm + (reported by CPAN testers) + + 2.002 (2012-01-18) + - FIXES dependencies/required perl version + - FIXES: #74021 Makefile.PL bad value for + version-requirement + + 2.001 (2012-01-12) + - FIXES XS_VERSION mismatch + - FIXES depencency on Unicode::Normalize (was 1.000 or higher, + but this is not needed). + + 2.000 (2012-01-08) + - switch to Unicode Technical Standard #46 (previously, + IDNA2003 has been used, which is now available as + Net::IDN::IDNA2003): + - add Net::IDN::UTS46 + test vectors from UTS #46 + - remove Net::IDN::Nameprep (only required for IDNA2003) + - add documentation about IDNA Standards and IDNA module + Overview/Roadmad + - allow NON-LDH labels (e.g. for SRV records), even if + UseSTD3Rules=true (parameter now only applies to + U-labels and A-labels, i.e. labels that are converted by + IDNA). + - FIXES potential portability problems in + Net::IDN::Punycode XS 1.999_20120108 + - FIXES 'wide character' warning with tests if tests + fail/if TB2 is used on modern perl installations. + - FIXES decoding bug in Net::IDN::Punycode::PP (discovered + through UTS #46 test vectors) + + 1.101 (2011-12-08) + - FIXES: #72615 faulty data in Build.PL causes a lack of + meta files, which breaks carton. + +------------------------------------------------------------------- Old: ---- Net-IDN-Encode-1.100.tar.gz New: ---- Net-IDN-Encode-2.003.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ perl-Net-IDN-Encode.spec ++++++ --- /var/tmp/diff_new_pack.zLFUxJ/_old 2013-08-01 15:58:53.000000000 +0200 +++ /var/tmp/diff_new_pack.zLFUxJ/_new 2013-08-01 15:58:53.000000000 +0200 @@ -1,8 +1,7 @@ -# vim: set sw=4 ts=4 et nu: # # spec file for package perl-Net-IDN-Encode # -# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -18,63 +17,56 @@ Name: perl-Net-IDN-Encode -Version: 1.100 +Version: 2.003 Release: 0 -Summary: Internationalizing Domain Names in Applications (RFC 3490) +%define cpan_name Net-IDN-Encode +Summary: Internationalizing Domain Names in Applications (IDNA) License: Artistic-1.0 or GPL-1.0+ Group: Development/Libraries/Perl -Source: http://search.cpan.org/CPAN/authors/id/C/CF/CFAERBER/Net-IDN-Encode-%{version}.tar.gz Url: http://search.cpan.org/dist/Net-IDN-Encode/ +Source: http://www.cpan.org/authors/id/C/CF/CFAERBER/%{cpan_name}-%{version}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-build -%{perl_requires} -BuildRequires: make BuildRequires: perl BuildRequires: perl-macros -BuildRequires: perl(Net::IDN::Nameprep) +BuildRequires: perl(ExtUtils::CBuilder) +BuildRequires: perl(Module::Build) >= 0.38 BuildRequires: perl(Test::NoWarnings) -Requires: perl(Net::IDN::Nameprep) +#BuildRequires: perl(Net::IDN::Encode) +#BuildRequires: perl(Net::IDN::Punycode) +#BuildRequires: perl(Net::IDN::Punycode::PP) +#BuildRequires: perl(Net::IDN::UTS46) +#BuildRequires: perl(Net::IDN::UTS46::_Mapping) >= 5.002 +%{perl_requires} %description This module provides an easy-to-use interface for encoding and decoding Internationalized Domain Names (IDNs). -IDNs use characters drawn from a large repertoire (Unicode), but IDNA allows -the non-ASCII characters to be represented using only the ASCII characters -already allowed in so-called host names today (letter-digit-hypen, -/[A-Z0-9-]/i). +IDNs use characters drawn from a large repertoire (Unicode), but IDNA +allows the non-ASCII characters to be represented using only the ASCII +characters already allowed in so-called host names today +(letter-digit-hypen, '/[A-Z0-9-]/i'). + +Use this module if you just want to convert domain names (or email +addresses), using whatever IDNA standard is the best choice at the moment. %prep -%setup -q -n "Net-IDN-Encode-%{version}" -find . -type f -name '*.pm' -exec %__chmod -x {} \; +%setup -q -n %{cpan_name}-%{version} +find . -type f -print0 | xargs -0 chmod 644 %build -%__perl ./Build.PL -./Build - -%install -./Build pure_install --destdir "%{buildroot}" --installdirs vendor -%perl_process_packlist +%{__perl} Build.PL installdirs=vendor optimize="%{optflags}" +./Build build flags=%{?_smp_mflags} %check ./Build test -%clean -%{?buildroot:%__rm -rf "%{buildroot}"} +%install +./Build install destdir=%{buildroot} create_packlist=0 +%perl_gen_filelist -%files -%defattr(-,root,root) -%doc Changes README LICENSE -%dir %{perl_vendorarch}/Net -%dir %{perl_vendorarch}/Net/IDN -%{perl_vendorarch}/Net/IDN/Encode.pm -%dir %{perl_vendorarch}/Net/IDN/Punycode.pm -%{perl_vendorarch}/Net/IDN/Punycode -%dir %{perl_vendorarch}/auto/Net -%dir %{perl_vendorarch}/auto/Net/IDN -%{perl_vendorarch}/auto/Net/IDN/Encode -%{perl_vendorarch}/auto/Net/IDN/Punycode -%doc %{perl_man3dir}/Net::IDN::Encode.%{perl_man3ext}%{ext_man} -%doc %{perl_man3dir}/Net::IDN::Punycode.%{perl_man3ext}%{ext_man} -%doc %{perl_man3dir}/Net::IDN::Punycode::*.%{perl_man3ext}%{ext_man} +%files -f %{name}.files +%defattr(-,root,root,755) +%doc Changes eg LICENSE README %changelog ++++++ Net-IDN-Encode-1.100.tar.gz -> Net-IDN-Encode-2.003.tar.gz ++++++ ++++ 5694 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org