Hello community,
here is the log from the commit of package yast2-ldap for openSUSE:12.3 checked in at 2013-02-01 16:16:21
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:12.3/yast2-ldap (Old)
and /work/SRC/openSUSE:12.3/.yast2-ldap.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "yast2-ldap", Maintainer is "jsuchome@suse.com"
Changes:
--------
--- /work/SRC/openSUSE:12.3/yast2-ldap/yast2-ldap.changes 2013-01-31 01:47:01.000000000 +0100
+++ /work/SRC/openSUSE:12.3/.yast2-ldap.new/yast2-ldap.changes 2013-02-01 16:16:24.000000000 +0100
@@ -1,0 +2,6 @@
+Fri Feb 1 09:52:08 CET 2013 - jsuchome@suse.cz
+
+- catch the possible exception from TLS options calls (bnc#801065)
+- 2.23.0
+
+-------------------------------------------------------------------
Old:
----
yast2-ldap-2.22.2.tar.bz2
New:
----
yast2-ldap-2.23.0.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-ldap.spec ++++++
--- /var/tmp/diff_new_pack.xoNRPP/_old 2013-02-01 16:16:24.000000000 +0100
+++ /var/tmp/diff_new_pack.xoNRPP/_new 2013-02-01 16:16:24.000000000 +0100
@@ -1,7 +1,7 @@
#
# spec file for package yast2-ldap
#
-# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
Name: yast2-ldap
-Version: 2.22.2
+Version: 2.23.0
Release: 0
BuildRoot: %{_tmppath}/%{name}-%{version}-build
++++++ yast2-ldap-2.22.2.tar.bz2 -> yast2-ldap-2.23.0.tar.bz2 ++++++
++++ 7375 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/COPYING new/yast2-ldap-2.23.0/COPYING
--- old/yast2-ldap-2.22.2/COPYING 2012-03-26 10:58:30.000000000 +0200
+++ new/yast2-ldap-2.23.0/COPYING 2013-02-01 10:45:02.000000000 +0100
@@ -1,12 +1,12 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
- Preamble
+ Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
@@ -15,7 +15,7 @@
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
+the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
@@ -55,8 +55,8 @@
The precise terms and conditions for copying, distribution and
modification follow.
-
- GNU GENERAL PUBLIC LICENSE
+
+ GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
@@ -110,7 +110,7 @@
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
-
+
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
@@ -168,7 +168,7 @@
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
-
+
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
@@ -225,7 +225,7 @@
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
-
+
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
@@ -255,7 +255,7 @@
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
- NO WARRANTY
+ NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
@@ -277,9 +277,9 @@
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
@@ -303,17 +303,16 @@
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
- Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
@@ -336,5 +335,5 @@
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
+library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/Makefile.am.common new/yast2-ldap-2.23.0/Makefile.am.common
--- old/yast2-ldap-2.22.2/Makefile.am.common 2012-03-16 08:56:46.000000000 +0100
+++ new/yast2-ldap-2.23.0/Makefile.am.common 2013-02-01 10:44:22.000000000 +0100
@@ -30,7 +30,7 @@
dist-hook: check-syntax
CHECK_SYNTAX = true
-check-syntax: $(client_DATA) $(ycpchook)
+check-syntax: $(client_DATA) $(ycpchook) $(ybcfiles)
@if test "$(client_DATA)"; then \
if $(CHECK_SYNTAX); then \
TO_CHECK="$(filter %.ycp,$^)"; \
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/VERSION new/yast2-ldap-2.23.0/VERSION
--- old/yast2-ldap-2.22.2/VERSION 2012-03-26 10:57:44.000000000 +0200
+++ new/yast2-ldap-2.23.0/VERSION 2013-02-01 10:44:15.000000000 +0100
@@ -1 +1 @@
-2.22.2
+2.23.0
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/autodocs-cc.ami new/yast2-ldap-2.23.0/autodocs-cc.ami
--- old/yast2-ldap-2.22.2/autodocs-cc.ami 2012-03-16 08:56:46.000000000 +0100
+++ new/yast2-ldap-2.23.0/autodocs-cc.ami 2013-02-01 10:44:22.000000000 +0100
@@ -1,5 +1,5 @@
# -*- makefile -*- Automake include file
-# $Id: autodocs-cc.ami 28248 2006-02-21 14:14:07Z mvidner $
+# $Id$
# Builds source documentation for C++ sources.
# Builds and installs by default, intended for base packages where the
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/conf/ldap.scr new/yast2-ldap-2.23.0/conf/ldap.scr
--- old/yast2-ldap-2.22.2/conf/ldap.scr 2008-12-18 14:47:05.000000000 +0100
+++ new/yast2-ldap-2.23.0/conf/ldap.scr 2013-01-22 11:27:05.000000000 +0100
@@ -23,7 +23,7 @@
* "scope": 2, // = sub ])
* (list of maps)
*
- * $Id: ldap.scr 13018 2003-12-11 12:52:53Z jhumpol $
+ * $Id$
*
*/
.ldap
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/configure.in new/yast2-ldap-2.23.0/configure.in
--- old/yast2-ldap-2.22.2/configure.in 2012-03-16 08:56:46.000000000 +0100
+++ new/yast2-ldap-2.23.0/configure.in 2013-02-01 10:44:22.000000000 +0100
@@ -1,9 +1,9 @@
dnl configure.in for yast2-ldap
dnl
-dnl -- This file is generated by y2autoconf 2.21.8 - DO NOT EDIT! --
+dnl -- This file is generated by y2autoconf 2.23.2 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-ldap, 2.22.1, http://bugs.opensuse.org/, yast2-ldap)
+AC_INIT(yast2-ldap, 2.23.0, http://bugs.opensuse.org/, yast2-ldap)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -18,7 +18,7 @@
AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
dnl Important YaST2 variables
-VERSION="2.22.1"
+VERSION="2.23.0"
RPMNAME="yast2-ldap"
MAINTAINER="Jiri Suchomel "
@@ -152,10 +152,10 @@
PKG_CHECK_MODULES(Y2CORE, yast2-core)
])
-CFLAGS="${CFLAGS} ${Y2CORE_CFLAGS} -Wall -Wformat=2 -Wmissing-prototypes"
+CFLAGS="${CFLAGS} -Wall -Wformat=2 -Wmissing-prototypes"
CXXFLAGS="${CXXFLAGS} ${Y2CORE_CFLAGS} -Wall -Wformat=2"
-: ${AGENT_LIBADD:='-L$(libdir) -lscr'}
+: ${AGENT_LIBADD:='-L$(libdir) -lscr -ly2util -lycpvalues'}
AC_SUBST(AGENT_LIBADD)
AC_DISABLE_STATIC
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/doc/TODO.txt new/yast2-ldap-2.23.0/doc/TODO.txt
--- old/yast2-ldap-2.22.2/doc/TODO.txt 2008-12-18 14:47:05.000000000 +0100
+++ new/yast2-ldap-2.23.0/doc/TODO.txt 2013-01-22 11:27:05.000000000 +0100
@@ -1,6 +1,6 @@
This is a TODO file for the Ldap SCR agent.
----------------------------------------------
-$Id: TODO.txt 11570 2003-09-01 15:35:00Z jsuchome $
+$Id$
TODO:
-----
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/doc/ldap.html new/yast2-ldap-2.23.0/doc/ldap.html
--- old/yast2-ldap-2.22.2/doc/ldap.html 2011-02-04 15:19:00.000000000 +0100
+++ new/yast2-ldap-2.23.0/doc/ldap.html 2013-01-22 11:27:05.000000000 +0100
@@ -1,7 +1,7 @@
<HTML>
<HEAD>
<TITLE>Ldap agent description</TITLE>
-<!-- $Id: ldap.html 63349 2011-02-04 14:18:59Z jsuchome $ -->
+<!-- $Id$ -->
<meta http-equiv="content-type" content="text/html; charset=UTF-8" />
</HEAD>
<BODY>
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/libtool.m4 new/yast2-ldap-2.23.0/libtool.m4
--- old/yast2-ldap-2.22.2/libtool.m4 2012-03-16 08:56:52.000000000 +0100
+++ new/yast2-ldap-2.23.0/libtool.m4 2013-02-01 10:44:30.000000000 +0100
@@ -1,8 +1,8 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-# Inc.
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
@@ -11,8 +11,8 @@
m4_define([_LT_COPYING], [dnl
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-# Inc.
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
@@ -146,6 +146,8 @@
AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
@@ -637,7 +639,7 @@
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2011 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
@@ -801,6 +803,7 @@
m4_case([$1],
[C], [_LT_LANG(C)],
[C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
[Java], [_LT_LANG(GCJ)],
[Fortran 77], [_LT_LANG(F77)],
[Fortran], [_LT_LANG(FC)],
@@ -822,6 +825,31 @@
])# _LT_LANG
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
# _LT_LANG_DEFAULT_CONFIG
# -----------------------
m4_defun([_LT_LANG_DEFAULT_CONFIG],
@@ -852,6 +880,10 @@
m4_ifdef([LT_PROG_GCJ],
[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
AC_PROVIDE_IFELSE([LT_PROG_RC],
[LT_LANG(RC)],
[m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
@@ -954,7 +986,13 @@
$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -962,6 +1000,7 @@
rm -rf libconftest.dylib*
rm -f conftest.*
fi])
+
AC_CACHE_CHECK([for -exported_symbols_list linker flag],
[lt_cv_ld_exported_symbols_list],
[lt_cv_ld_exported_symbols_list=no
@@ -973,6 +1012,7 @@
[lt_cv_ld_exported_symbols_list=no])
LDFLAGS="$save_LDFLAGS"
])
+
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
[lt_cv_ld_force_load=no
cat > conftest.c << _LT_EOF
@@ -990,7 +1030,9 @@
echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
_lt_result=$?
- if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1035,8 +1077,8 @@
])
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
# Checks for linker and compiler features on darwin
m4_defun([_LT_DARWIN_LINKER_FEATURES],
[
@@ -1047,6 +1089,8 @@
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
if test "$lt_cv_ld_force_load" = "yes"; then
_LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
@@ -1330,14 +1374,27 @@
CFLAGS="$SAVE_CFLAGS"
fi
;;
-sparc*-*solaris*)
+*-*solaris*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
@@ -1414,13 +1471,13 @@
if test -n "$RANLIB"; then
case $host_os in
openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
case $host_os in
@@ -1600,6 +1657,11 @@
lt_cv_sys_max_cmd_len=196608
;;
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
@@ -1639,7 +1701,7 @@
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
test $i != 17 # 1/2 MB should be enough
do
@@ -2185,7 +2247,7 @@
case $host_os in
aix3*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
shlibpath_var=LIBPATH
@@ -2194,7 +2256,7 @@
;;
aix[[4-9]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
@@ -2259,7 +2321,7 @@
;;
bsdi[[45]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
@@ -2398,7 +2460,7 @@
;;
dgux*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
@@ -2406,10 +2468,6 @@
shlibpath_var=LD_LIBRARY_PATH
;;
-freebsd1*)
- dynamic_linker=no
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
@@ -2417,7 +2475,7 @@
objformat=`/usr/bin/objformat`
else
case $host_os in
- freebsd[[123]]*) objformat=aout ;;
+ freebsd[[23]].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
@@ -2435,7 +2493,7 @@
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
- freebsd2*)
+ freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[[01]]* | freebsdelf3.[[01]]*)
@@ -2455,17 +2513,18 @@
;;
gnu*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
haiku*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
@@ -2526,7 +2585,7 @@
;;
interix[[3-9]]*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
@@ -2542,7 +2601,7 @@
nonstopux*) version_type=nonstopux ;;
*)
if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
@@ -2579,9 +2638,9 @@
dynamic_linker=no
;;
-# This must be Linux ELF.
+# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2644,7 +2703,7 @@
;;
newsos6)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
@@ -2713,7 +2772,7 @@
;;
solaris*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2738,7 +2797,7 @@
;;
sysv4 | sysv4.3*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
@@ -2762,7 +2821,7 @@
sysv4*MP*)
if test -d /usr/nec ;then
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
soname_spec='$libname${shared_ext}.$major'
shlibpath_var=LD_LIBRARY_PATH
@@ -2793,7 +2852,7 @@
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2803,7 +2862,7 @@
;;
uts4*)
- version_type=linux
+ version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
@@ -3225,7 +3284,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-# This must be Linux ELF.
+# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3645,6 +3704,7 @@
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
@@ -4229,7 +4289,9 @@
case $cc_basename in
nvcc*) # Cuda Compiler Driver 2.2
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
;;
esac
else
@@ -4321,18 +4383,33 @@
;;
*)
case `$CC -V 2>&1 | sed 5q` in
- *Sun\ F* | *Sun*Fortran*)
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
# Sun Fortran 8.3 passes all unrecognized flags to the linker
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)=''
;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
*Sun\ C*)
# Sun C 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
;;
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
esac
;;
esac
@@ -4492,7 +4569,9 @@
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
- cl*) ;;
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
@@ -4517,7 +4596,6 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
@@ -4768,8 +4846,7 @@
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test "x$supports_anon_versioning" = xyes; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
@@ -5064,6 +5141,7 @@
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
@@ -5110,10 +5188,6 @@
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- freebsd1*)
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
@@ -5126,7 +5200,7 @@
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
+ freebsd2.*)
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -5165,7 +5239,6 @@
fi
if test "$with_gnu_ld" = no; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
@@ -5607,9 +5680,6 @@
_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
[Flag to hardcode $libdir into a binary during linking.
This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
- [[If ld is used when linking, flag to hardcode $libdir into a binary
- during linking. This must work even if $libdir does not exist]])
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
@@ -5767,7 +5837,6 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
@@ -6137,7 +6206,7 @@
esac
;;
- freebsd[[12]]*)
+ freebsd2.*)
# C++ shared libraries reported to be fairly broken before
# switch to ELF
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -6898,12 +6967,18 @@
}
};
_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
])
_lt_libdeps_save_CFLAGS=$CFLAGS
case "$CC $CFLAGS " in #(
*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
esac
dnl Parse the compiler output and extract the necessary
@@ -7100,7 +7175,6 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
@@ -7233,7 +7307,6 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
@@ -7420,6 +7493,77 @@
])# _LT_LANG_GCJ_CONFIG
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
@@ -7489,6 +7633,13 @@
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
# LT_PROG_RC
# ----------
AC_DEFUN([LT_PROG_RC],
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/ltoptions.m4 new/yast2-ldap-2.23.0/ltoptions.m4
--- old/yast2-ldap-2.22.2/ltoptions.m4 2012-03-16 08:56:52.000000000 +0100
+++ new/yast2-ldap-2.23.0/ltoptions.m4 2013-02-01 10:44:31.000000000 +0100
@@ -326,9 +326,24 @@
# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
- [AS_HELP_STRING([--with-pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
[pic_mode=default])
test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/ltversion.m4 new/yast2-ldap-2.23.0/ltversion.m4
--- old/yast2-ldap-2.22.2/ltversion.m4 2012-03-16 08:56:52.000000000 +0100
+++ new/yast2-ldap-2.23.0/ltversion.m4 2013-02-01 10:44:31.000000000 +0100
@@ -9,15 +9,15 @@
# @configure_input@
-# serial 3293 ltversion.m4
+# serial 3337 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.4])
-m4_define([LT_PACKAGE_REVISION], [1.3293])
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4'
-macro_revision='1.3293'
+[macro_version='2.4.2'
+macro_revision='1.3337'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/missing new/yast2-ldap-2.23.0/missing
--- old/yast2-ldap-2.22.2/missing 2012-03-16 08:56:56.000000000 +0100
+++ new/yast2-ldap-2.23.0/missing 2013-02-01 10:44:39.000000000 +0100
@@ -1,10 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2012-01-06.18; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
@@ -26,7 +25,7 @@
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
@@ -34,7 +33,7 @@
sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-# In the cases where this matters, `missing' is being run in the
+# In the cases where this matters, 'missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
@@ -65,7 +64,7 @@
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
@@ -74,21 +73,20 @@
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
+ aclocal touch file 'aclocal.m4'
+ autoconf touch file 'configure'
+ autoheader touch file 'config.h.in'
autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
+ automake touch all 'Makefile.in' files
+ bison create 'y.tab.[ch]', if possible, from existing .[ch]
+ flex create 'lex.yy.c', if possible, from existing .c
help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
+ lex create 'lex.yy.c', if possible, from existing .c
makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+ yacc create 'y.tab.[ch]', if possible, from existing .[ch]
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
Send bug reports to ."
exit $?
@@ -100,8 +98,8 @@
;;
-*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "$0: Unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
@@ -122,22 +120,13 @@
# Not GNU programs, they don't have --version.
;;
- tar*)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
+ # running '$TOOL --version' or '$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi
@@ -149,27 +138,27 @@
case $program in
aclocal*)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
+WARNING: '$1' is $msg. You should only need it if
+ you modified 'acinclude.m4' or '${configure_ac}'. You might want
+ to install the Automake and Perl packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf*)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+WARNING: '$1' is $msg. You should only need it if
+ you modified '${configure_ac}'. You might want to install the
+ Autoconf and GNU m4 packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader*)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
+WARNING: '$1' is $msg. You should only need it if
+ you modified 'acconfig.h' or '${configure_ac}'. You might want
+ to install the Autoconf and GNU m4 packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
@@ -186,9 +175,9 @@
automake*)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
+WARNING: '$1' is $msg. You should only need it if
+ you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
+ You might want to install the Automake and Perl packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
@@ -197,10 +186,10 @@
autom4te*)
echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
+WARNING: '$1' is needed, but is $msg.
You might have modified some files without having the
proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
+ You can get '$1' as part of Autoconf from any GNU
archive site."
file=`echo "$*" | sed -n "$sed_output"`
@@ -220,13 +209,13 @@
bison*|yacc*)
echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
+WARNING: '$1' $msg. You should only need it if
+ you modified a '.y' file. You may need the Bison package
in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
+ Bison from any GNU archive site."
rm -f y.tab.c y.tab.h
if test $# -ne 1; then
- eval LASTARG="\${$#}"
+ eval LASTARG=\${$#}
case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
@@ -250,13 +239,13 @@
lex*|flex*)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
+WARNING: '$1' is $msg. You should only need it if
+ you modified a '.l' file. You may need the Flex package
in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
+ Flex from any GNU archive site."
rm -f lex.yy.c
if test $# -ne 1; then
- eval LASTARG="\${$#}"
+ eval LASTARG=\${$#}
case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
@@ -273,10 +262,10 @@
help2man*)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
+WARNING: '$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
+ Help2man package in order for those modifications to take
+ effect. You can get Help2man from any GNU archive site."
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
@@ -291,12 +280,12 @@
makeinfo*)
echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
+WARNING: '$1' is $msg. You should only need it if
+ you modified a '.texi' or '.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
+ call might also be the consequence of using a buggy 'make' (AIX,
+ DU, IRIX). You might want to install the Texinfo package or
+ the GNU make package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
@@ -318,49 +307,14 @@
touch $file
;;
- tar*)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case $firstarg in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case $firstarg in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
*)
echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
+WARNING: '$1' is needed, and is $msg.
You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
+ proper tools for further handling them. Check the 'README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
+ some other package would contain this missing '$1' program."
exit 1
;;
esac
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/src/LdapAgent.cc new/yast2-ldap-2.23.0/src/LdapAgent.cc
--- old/yast2-ldap-2.22.2/src/LdapAgent.cc 2012-02-20 09:41:03.000000000 +0100
+++ new/yast2-ldap-2.23.0/src/LdapAgent.cc 2013-02-01 10:44:15.000000000 +0100
@@ -24,7 +24,7 @@
*
* Authors: Jiri Suchomel
*
- * $Id: LdapAgent.cc 67486 2012-02-20 08:41:02Z jsuchome $
+ * $Id$
*/
#include "LdapAgent.h"
@@ -1302,7 +1302,15 @@
// start TLS if proper parameter is given
string tls = getValue (argmap, "use_tls");
- set_tls_options (argmap, tls);
+ try {
+ set_tls_options (argmap, tls);
+ }
+ catch (LDAPException e) {
+ debug_exception (e, "setting TLS options");
+ delete ldap;
+ ldap = NULL;
+ return YCPBoolean (false);
+ }
if (tls == "try" || tls == "yes") {
try {
@@ -1501,8 +1509,8 @@
}
else if (PC(0) == "start_tls") {
- set_tls_options (argmap, "yes");
try {
+ set_tls_options (argmap, "yes");
ldap->start_tls ();
}
catch (LDAPException e) {
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/src/LdapAgent.h new/yast2-ldap-2.23.0/src/LdapAgent.h
--- old/yast2-ldap-2.22.2/src/LdapAgent.h 2012-01-24 17:12:03.000000000 +0100
+++ new/yast2-ldap-2.23.0/src/LdapAgent.h 2013-01-22 11:27:05.000000000 +0100
@@ -24,7 +24,7 @@
*
* Authors: Jiri Suchomel
*
- * $Id: LdapAgent.h 67263 2012-01-24 16:12:02Z jsuchome $
+ * $Id$
*/
#ifndef _LdapAgent_h
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/src/LdapServerAccess.pm new/yast2-ldap-2.23.0/src/LdapServerAccess.pm
--- old/yast2-ldap-2.22.2/src/LdapServerAccess.pm 2012-01-24 17:12:03.000000000 +0100
+++ new/yast2-ldap-2.23.0/src/LdapServerAccess.pm 2013-01-22 11:27:05.000000000 +0100
@@ -24,7 +24,7 @@
# Package: Low-level LDAP configuration (agent, etc.)
# Summary: Access to some routines of yast2-ldap-server module
#
-# $Id: LdapServerAccess.pm 67263 2012-01-24 16:12:02Z jsuchome $
+# $Id$
#
# Module provides access to LDAP server schemas. The work with schemas
# is done using functions from yast2-ldap-server module. This module
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-ldap-2.22.2/src/Y2CCLdapAgent.cc new/yast2-ldap-2.23.0/src/Y2CCLdapAgent.cc
--- old/yast2-ldap-2.22.2/src/Y2CCLdapAgent.cc 2012-01-24 17:12:03.000000000 +0100
+++ new/yast2-ldap-2.23.0/src/Y2CCLdapAgent.cc 2013-01-22 11:27:05.000000000 +0100
@@ -24,7 +24,7 @@
*
* Authors: Jiri Suchomel
*
- * $Id: Y2CCLdapAgent.cc 67263 2012-01-24 16:12:02Z jsuchome $
+ * $Id$
*/
#include
N§²æìržyéZ)z{.±ç(húéì¹» ®&Þ¢§²ë ¢ž¢¶v+b¢v¥rŠjwlzf¢^ˬyÊ&+~
éi¢§²ë ¢ž
