Hello community, here is the log from the commit of package squid3 for openSUSE:Factory checked in at Fri Sep 3 15:14:19 CEST 2010. -------- --- squid3/squid3.changes 2010-07-25 18:31:22.000000000 +0200 +++ squid3/squid3.changes 2010-08-31 15:44:47.000000000 +0200 @@ -1,0 +2,38 @@ +Tue Aug 31 13:43:26 UTC 2010 - chris@computersalat.de + +- added bug2972-real-fix.patch + o fix build for SLE_10 + o but impossible to apply LDAP patch + +------------------------------------------------------------------- +Wed Aug 25 09:46:36 UTC 2010 - chris@computersalat.de + +- update to 3.1.7 + - Regression Bug 3021: Large DNS reply causes crash + - Regression Bug 3011: ICAP, HTTPS, cache_peer probe IPv4-only port fixes + - Regression Bug 2997: visible_hostname directive no longer matches docs + - Bug 3012: deprecate sslBump and support ssl-bump spelling in http_port + - Bug 3006: handle IPV6_V6ONLY definition missing + - Bug 3004: Solaris 9 SunStudio 12 build failure + - Bug 3003: inconsistent concepts in documentation of cache_dir + - Bug 3001: dnsserver link issues + - HTTP/1.1: default keep-alive for 1.1 clients (bug 3016) + - HTTP/1.1: Improved Range header field validation + - HTTP/1.1: Forward multiple unknown Cache-Control directives + - HTTP/1.1: Stop sending Proxy-Connection header + - Fix 32-bit wrap in refresh_pattern min/max values + - ... and several documentation corrections. + +------------------------------------------------------------------- +Tue Aug 10 11:07:29 UTC 2010 - chris@computersalat.de + +- update to 3.1.6 + - Bug 2994, 2995: IPv4-only regressions + - Bug 2991: Wrong parameters to fcntl() in commSetCloseOnExec() + - Bug 2975: chunked requests not supported after regular ones + - Fix: 32-bit overflow in reported bytes received from next hop + - Fix Libtool build regressions + - Limited split-stack IPv6 support. + - squid_db_auth support MD5 encrypted passwords + +------------------------------------------------------------------- calling whatdependson for head-i586 Old: ---- squid-3.1.5.tar.bz2 New: ---- bug2972-real-fix.patch squid-3.1.7.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ squid3.spec ++++++ --- /var/tmp/diff_new_pack.tklwj8/_old 2010-09-03 15:10:33.000000000 +0200 +++ /var/tmp/diff_new_pack.tklwj8/_new 2010-09-03 15:10:33.000000000 +0200 @@ -1,5 +1,5 @@ # -# spec file for package squid3 (Version 3.1.5) +# spec file for package squid3 (Version 3.1.7) # # Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. # @@ -22,7 +22,7 @@ Name: squid3 Summary: Squid Version 3 WWW Proxy Server -Version: 3.1.5 +Version: 3.1.7 Release: 1 License: GPLv2+ Url: http://www.squid-cache.org/Versions/v3 @@ -53,10 +53,13 @@ # #Patch0: http://www.squid-cache.org/Versions/v3/3.0/changesets/squid-3.0-9107.patch # +## Real resolution for Libtool 2.x build issues on libtool 1.x systems. +## applicable for 3.1.6, 3.1.7 +Patch99: bug2972-real-fix.patch Patch100: squid-3.1.4-config.patch Patch101: squid-3.1.4-swapdir.patch -Patch102: squid-beta-3.0-ia64.patch -Patch103: squid-3.1.4-openldap.patch +Patch102: squid-3.1.4-openldap.patch +Patch103: squid-beta-3.0-ia64.patch Patch104: squid-beta-3.0-mem_node_64bit.patch # only for SLE_10 Patch110: squid-bootstrap.patch @@ -107,13 +110,18 @@ %{__cp} %{S:11} . # upstream patches after RELEASE #%patch0 -p0 -# other patches +##### other patches +## Real resolution for Libtool 2.x build issues on libtool 1.x systems. +## applicable for 3.1.6, 3.1.7 +%patch99 -p1 %patch100 -p1 +%if 0%{suse_version} > 1010 %patch101 -p1 -%ifarch ia64 %patch102 -p1 %endif +%ifarch ia64 %patch103 -p1 +%endif %patch104 -p1 # %if 0%{?sles_version} == 10 @@ -123,11 +131,19 @@ chmod a-x CREDITS %build +%if 0%{suse_version} > 1010 export CFLAGS="$RPM_OPT_FLAGS -fPIE -fPIC -fno-strict-aliasing" export CXXFLAGS="$RPM_OPT_FLAGS -fPIC -fno-strict-aliasing" -export LDFLAGS='-pie' ./bootstrap.sh autoreconf -fiv +%else +# before patch99 +#export CFLAGS="-I \${top_srcdir}/libltdl $RPM_OPT_FLAGS -fPIE -fPIC -fno-strict-aliasing" +#export CXXFLAGS="-I \${top_srcdir}/libltdl $RPM_OPT_FLAGS -fPIC -fno-strict-aliasing" +export CFLAGS="$RPM_OPT_FLAGS -fPIE -fPIC -fno-strict-aliasing" +export CXXFLAGS="$RPM_OPT_FLAGS -fPIC -fno-strict-aliasing" +%endif +export LDFLAGS='-pie' ./configure --prefix=/usr \ --sysconfdir=%{squidconfdir} \ --bindir=/usr/sbin \ @@ -139,7 +155,9 @@ --libdir=%{_libdir} \ --sharedstatedir=/var/squid \ --with-logdir=/var/log/squid \ +%if 0%{suse_version} > 1010 --with-swapdir=/var/cache/squid \ +%endif --with-pidfile=/var/run/squid.pid \ --with-dl \ --enable-storeio \ ++++++ RELEASENOTES.html ++++++ --- /var/tmp/diff_new_pack.tklwj8/_old 2010-09-03 15:10:33.000000000 +0200 +++ /var/tmp/diff_new_pack.tklwj8/_new 2010-09-03 15:10:33.000000000 +0200 @@ -2,10 +2,10 @@ <HTML> <HEAD> <META NAME="GENERATOR" CONTENT="LinuxDoc-Tools 0.9.66"> - <TITLE>Squid 3.1.5 release notes</TITLE> + <TITLE>Squid 3.1.7 release notes</TITLE> </HEAD> <BODY> -<H1>Squid 3.1.5 release notes</H1> +<H1>Squid 3.1.7 release notes</H1> <H2>Squid Developers</H2> <HR> @@ -70,7 +70,7 @@ <HR> <H2><A NAME="s1">1.</A> <A HREF="#toc1">Notice</A></H2> -<P>The Squid Team are pleased to announce the release of Squid-3.1.5.</P> +<P>The Squid Team are pleased to announce the release of Squid-3.1.7</P> <P>This new release is available for download from <A HREF="http://www.squid-cache.org/Versions/v3/3.1/">http://www.squid-cache.org/Versions/v3/3.1/</A> or the <A HREF="http://www.squid-cache.org/Mirrors/http-mirrors.html">mirrors</A>.</P> @@ -85,21 +85,21 @@ <P>Although this release is deemed good enough for use in many setups, please note the existence of <A HREF="http://bugs.squid-cache.org/buglist.cgi?query_format=advanced&target_milestone=3.1&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&cmdtype=doit&order=bugs.bug_severity">open bugs against Squid-3.1</A>.</P> -<P>Some issues to note as currently known in this release which are not able to be fixed in this 3.1 series are:</P> +<P>Some issues to note as currently known in this release which are not able to be fixed in the 3.1 series are:</P> <P> <UL> <LI>The lack of some features available in Squid-2.x series. See the regression sections below for full details.</LI> -<LI>The lack of IPv6 split-stack support for MacOSX, OpenBSD and maybe others.</LI> +<LI>IPv6 split-stack support for Windows XP, MacOS X, OpenBSD and maybe others is not complete.</LI> +<LI>CVE-2009-0801 : NAT interception vulnerability to malicious clients.</LI> </UL> </P> <P>Currently known issues which only depends on available developer time and may still be resolved in a future 3.1 release are:</P> <P> <UL> -<LI>IPv4 fall-back occasionally failing on dual IPv4/IPv6 websites.</LI> <LI>An ongoing slow FD leak introduced somewhere during the Squid-3.0 cycle.</LI> <LI>Windows support is still largely missing.</LI> -<LI>Build status for the 3.x series is still largely unknown for Unix based OS and other less popular systems.</LI> +<LI>AIX support for building with the IBM compiler is broken.</LI> </UL> </P> @@ -155,7 +155,7 @@ To be frozen as stable the code must be compiling well and have passed a period of 14 days with no new bugs reported against the new code added in that release.</P> -<P>When one of these Squid-3.X.0.Z packages passes our bug-free standards a 3.X.Y numbered release will be made.</P> +<P>When one of these Squid-3.X.0.Z packages passes those criteria a 3.X.Y numbered release will be made.</P> <P>We can only hope enough testing has been done to consider these ready for production use. As always we are fully dependent on people testing the previous packages and reporting all bugs.</P> @@ -183,7 +183,7 @@ <P>squid.conf has undergone a facelift.</P> <P>Don't worry, few operational changes have been made. -Older configs from Squdi 2.x and 3.0 are still expected to run in 3.1 with only the usual minor +Older configs from Squid 2.x and 3.0 are still expected to run in 3.1 with only the usual minor changes seen between major release. Details on those are listed below.</P> <P>New users will be relieved to see a very short squid.conf on clean installs. @@ -231,9 +231,17 @@ <H3>Limitations of IPv6 Support</H3> -<P>In this release there is no split-stack support. This means that OS which do not provide -IP stacks based on the KAME stack with Hybrid extensions to do IPv4-mapping cannot use IPv6 -with Squid.</P> +<P>In this release there is incomplete split-stack support. This means that OS which do not provide +IP stacks based on the KAME stack with Hybrid extensions to do IPv4-mapping cannot use full IPv6 +with Squid. From 3.1.6 the automatic capability detection will enable these abilities: +<UL> +<LI>open both IPv4 and IPv6 versions of http_port for client connections where applicable.</LI> +<LI>perform DNS to both IPv4 and IPv6 DNS servers.</LI> +<LI>permit IPv6-only snmp_incoming_address and snmp_outgoing_address to be configured.</LI> +<LI>permit IPv6 server connection provided tcp_outgoing_address has been configured (see below).</LI> +</UL> +</P> +<P><EM>NOTE:</EM> ICAP, SNMP, ICP and HTCP are not yet opening double ports so they will only run as IPv4-only or IPv6-only.</P> <P>Specify a specific tcp_outgoing_address and the clients who match its ACL are limited to the IPv4 or IPv6 network that address belongs to. They are not permitted over the @@ -242,12 +250,12 @@ See the squid.conf documentation for further details.</P> <P>WCCP is not available (neither version 1 or 2). -It remains built into squid for use with IPv4 traffic but IPv6 cannot use it.</P> +It remains built into Squid for use with IPv4 traffic but IPv6 cannot use it.</P> <P>Pseudo-Transparent Interception is done via NAT at the OS level and is not available in IPv6. Squid will ensure that any port set with transparent or intercept options be an IPv4-only listening address. Wildcard can still be used but will not open as an IPv6. -To ensure that squid can accept IPv6 traffic on its default port, an alternative should +To ensure that Squid can accept IPv6 traffic on its default port, an alternative should be chosen to handle transparently intercepted traffic. <PRE> http_port 3128 @@ -275,7 +283,7 @@ <H3>Localization</H3> -<P>The error pages presented by squid may now be localized per-request to match the visitors local preferred language.</P> +<P>The error pages presented by Squid may now be localized per-request to match the visitors local preferred language.</P> <P>The error_directory option in squid.conf needs to be removed.</P> @@ -283,7 +291,7 @@ Updates can be downloaded from <A HREF="http://www.squid-cache.org/Versions/langpack/">www.squid-cache.org/Versions/langpack/</A></P> -<P>The squid developers are interested in making squid available in a wide variety of languages. +<P>The Squid developers are interested in making Squid available in a wide variety of languages. Contribution of new languages is encouraged.</P> <H3>CSS Stylesheet controls</H3> @@ -458,8 +466,9 @@ <P>Squid-2 contained a hack using the <EM>update_http0.9</EM> squid.conf option to work around the unusual replies. This option is now obsolete.</P> -<P>The <EM>proto</EM> ACL type matches <EM>ICY</EM> once the reply has been received, before that the processing -is only aware on an HTTP request. So the ACL will match <EM>HTTP</EM>.</P> +<P>The <EM>proto</EM> ACL type only matches <EM>ICY</EM> once the reply has been received, before that the processing +is only aware on an HTTP request. So the ACL will match <EM>HTTP</EM> in <EM>http_access</EM> and <EM>ICY</EM> in +<EM>http_reply_access</EM>.</P> <H2><A NAME="s3">3.</A> <A HREF="#toc3">Changes to squid.conf since Squid-3.0</A></H2> @@ -673,21 +682,21 @@ </P> <DT><B>dns_v4_fallback</B><DD> -<P>New option to prevent squid from always looking up IPv4 regardless of whether IPv6 addresses are found. +<P>New option to prevent Squid from always looking up IPv4 regardless of whether IPv6 addresses are found. Squid will follow a policy of prefering IPv6 links, keeping the IPv4 only as a safety net behind IPv6. <PRE> Standard practice with DNS is to lookup either A or AAAA records and use the results if it succeeds. Only looking up the other if the first attempt fails or otherwise produces no results. - That policy however will cause squid to produce error pages for some + That policy however will cause Squid to produce error pages for some servers that advertise AAAA but are unreachable over IPv6. - If this is ON squid will always lookup both AAAA and A, using both. - If this is OFF squid will lookup AAAA and only try A if none found. + If this is ON Squid will always lookup both AAAA and A, using both. + If this is OFF Squid will lookup AAAA and only try A if none found. WARNING: There are some possibly unwanted side-effects with this on: - *) Doubles the load placed by squid on the DNS network. + *) Doubles the load placed by Squid on the DNS network. *) May negatively impact connection delay times. </PRE> @@ -731,7 +740,7 @@ <P>New option to replace the old configure option --enable-default-err-language New translations can be downloaded from http://www.squid-cache.org/Versions/langpack/ <PRE> - Set the default language which squid will send error pages in + Set the default language which Squid will send error pages in if no existing translation matches the clients language preferences. @@ -829,7 +838,7 @@ translation of the data portion of the segments will never be needed. When a client only expects to do two-way FTP transfers this may be useful. - If squid finds that it must do a three-way FTP transfer after issuing + If Squid finds that it must do a three-way FTP transfer after issuing an EPSV ALL command, the FTP session will fail. If you have any doubts about this option do not use it. @@ -962,7 +971,7 @@ options are order-specific within the config as a whole. A few layers of include are allowed, but too many are confusing and - squid will enforce an include depth of 16 files. + Squid will enforce an include depth of 16 files. Syntax: include /path/to/file1 /path/to/file2 @@ -1024,8 +1033,8 @@ <DT><B>ssl_bump</B><DD> <P>New Access control for which CONNECT requests to an http_port -marked with an sslBump flag are actually "bumped". Please -see the sslBump flag of an http_port option for more details +marked with an ssl-bump flag are actually "bumped". Please +see the ssl-bump flag of an http_port option for more details about decoding proxied SSL connections. DEFAULT: No requests are bumped. <PRE> @@ -1146,14 +1155,14 @@ SMB LanManager authentication through the NTLM interface without the need for a domain controller. Thus the new name is <EM>ntlm_smb_lm_auth</EM>.</P> <P>WARNING: due to the name clash with Samba helper, admin should be careful to only update their squid.conf if the -squid bundled binary is used and needed. If the Samba helper is in use, the squid.conf should not be altered.</P> +Squid bundled binary is used and needed. If the Samba helper is in use, the squid.conf should not be altered.</P> <DT><B>balance_on_multiple_ip</B><DD> <P>The previous default behavour (rotate per-request) of this setting causes failover clashes with IPv6 built-in mechanisms. It has thus been turned off by default. Making the 'best choice' IP continue in use for any hostname until it encounters a connection failure and failover drops to the next known IP. <PRE> - Modern IP resolvers in squid sort lookup results by preferred access. - By default squid will use these IP in order and only rotates to + Modern IP resolvers in Squid sort lookup results by preferred access. + By default Squid will use these IP in order and only rotates to the next listed when the most preffered fails. Some load balancing servers based on round robin DNS have been @@ -1236,7 +1245,7 @@ <DT><B>external_acl_type</B><DD> -<P>New options 'ipv4' and 'ipv6' are added to set the IPv4/v6 protocol between squid and its helpers. +<P>New options 'ipv4' and 'ipv6' are added to set the IPv4/v6 protocol between Squid and its helpers. Please be aware of some limits to these options. These options only affet the transport protocol used to send data to and from the helpers. Squid in IPv6-mode may still send %SRC addresses in IPv4 or IPv6 format, so all helpers will need to be checked and converted to cope with such information cleanly. @@ -1279,7 +1288,7 @@ </PRE> </P> -<DT><B>http_port transparent intercept sslbump connection-auth[=on|off] ignore-cc</B><DD> +<DT><B>http_port transparent intercept ssl-bump connection-auth[=on|off] ignore-cc</B><DD> <P>Option 'transparent' is being deprecated in favour of 'intercept' which more clearly identifies what the option does. For now option 'tproxy' remains with old behaviour meaning fully-invisible proxy using TPROXY support.</P> <P>New port options @@ -1306,7 +1315,7 @@ Warning: This option violates HTTP specifications if used in non-accelerator setups. - sslBump Intercept each CONNECT request matching ssl_bump ACL, + ssl-bump Intercept each CONNECT request matching ssl_bump ACL, establish secure connection with the client and with the server, decrypt HTTP messages as they pass through Squid, and treat them as unencrypted HTTP messages, @@ -1320,12 +1329,12 @@ for more information on these options. The ssl_bump option is required to fully enable - the SslBump feature. + the SSL Bump feature. </PRE> </P> -<DT><B>https_port intercept sslbump connection-auth[=on|off]</B><DD> +<DT><B>https_port intercept ssl-bump connection-auth[=on|off]</B><DD> <P>New port options. see http_port.</P> <DT><B>icap_service bypass=on|off|1|0 routing=on|off|1|0</B><DD> @@ -1352,7 +1361,7 @@ should have the same method and vectoring point as the current ICAP transaction. Services violating these rules are ignored. An empty X-Next-Services value results in an empty plan which - ends the current adaptation. + ends the current adaptation. Routing is not allowed by default: the ICAP X-Next-Services response header is ignored. @@ -1572,7 +1581,7 @@ <DT><B>--disable-ipv6</B><DD> <P>Build without IPv6 support. The default is to auto-detect system capabilities -and build with IPv6 when possible.</P> +and use IPv6 when possible.</P> <DT><B>--disable-loadable-modules</B><DD> <P>Build without support for loadable modules.</P> @@ -1582,7 +1591,7 @@ This only affects the building process, enabling it to complete despite some possibly serious issues. Please do not use lightly, and please report the build issues which make it needed -to the squid developers before doing so.</P> +to the Squid developers before doing so.</P> <DT><B>--disable-translation</B><DD> <P>Prevent Squid generating localized error page templates and manuals when built. @@ -1614,11 +1623,7 @@ Use --without-libxml2 to prevent it being auto-detected.</P> <DT><B>--with-logdir=PATH</B><DD> -<P>Allow build-time configuration of Default location for squid logs.</P> - -<DT><B>--with-ipv6-split-stack</B><DD> -<P>Force enable special additions for IPv6 support in Windows XP and various BSD systems. -see the IPv6 details above for a better description.</P> +<P>Allow build-time configuration of Default location for Squid logs.</P> <DT><B>--with-pidfile=PATH</B><DD> <P>Allow build-time configuration of Default location and name of squid.pid file.</P> @@ -1645,7 +1650,7 @@ <DT><B>--enable-linux-netfilter</B><DD> <P>This option now enables support for all three netfilter interception targets.</P> -<P>Adding TPROXY version 4+ support to squid through the netfilter TPROXY target. +<P>Adding TPROXY version 4+ support to Squid through the netfilter TPROXY target. This options requires a linux kernel 2.6.25 or later for embeded netfilter TPROXY targets.</P> <P>Older REDIRECT and DNAT targets work as before on HTTP ports marked 'intercept'.</P> ++++++ bug2972-real-fix.patch ++++++ ++++ 1226 lines (skipped) ++++++ squid-3.1.5.tar.bz2 -> squid-3.1.7.tar.bz2 ++++++ ++++ 36449 lines of diff (skipped) ++++++ squid-bootstrap.patch ++++++ --- /var/tmp/diff_new_pack.tklwj8/_old 2010-09-03 15:10:34.000000000 +0200 +++ /var/tmp/diff_new_pack.tklwj8/_new 2010-09-03 15:10:34.000000000 +0200 @@ -1,6 +1,6 @@ -diff -ruN squid-3.1.5-orig/acinclude.m4 squid-3.1.5/acinclude.m4 ---- squid-3.1.5-orig/acinclude.m4 2010-07-02 04:47:30.000000000 +0200 -+++ squid-3.1.5/acinclude.m4 2010-07-25 20:24:04.000000000 +0200 +diff -ruN squid-3.1.6-orig/acinclude.m4 squid-3.1.6/acinclude.m4 +--- squid-3.1.6-orig/acinclude.m4 2010-08-01 16:01:37.000000000 +0200 ++++ squid-3.1.6/acinclude.m4 2010-08-10 13:51:00.000000000 +0200 @@ -134,7 +134,7 @@ dnl and this notice are preserved. dnl @@ -10,9 +10,9 @@ pushdef([VARIABLE],$1) pushdef([EXECUTABLE],$2) -diff -ruN squid-3.1.5-orig/bootstrap.sh squid-3.1.5/bootstrap.sh ---- squid-3.1.5-orig/bootstrap.sh 2010-07-02 04:47:30.000000000 +0200 -+++ squid-3.1.5/bootstrap.sh 2010-07-25 20:24:04.000000000 +0200 +diff -ruN squid-3.1.6-orig/bootstrap.sh squid-3.1.6/bootstrap.sh +--- squid-3.1.6-orig/bootstrap.sh 2010-08-01 16:01:37.000000000 +0200 ++++ squid-3.1.6/bootstrap.sh 2010-08-10 13:51:00.000000000 +0200 @@ -7,7 +7,7 @@ # Autotool versions preferred. To override either edit the script # to match the versions you want to use, or set the variables on @@ -22,15 +22,43 @@ amversions="${amver:-1.11 1.10 1.9}" ltversions="${ltver:-2.2 1.5 1.4}" -diff -ruN squid-3.1.5-orig/configure.in squid-3.1.5/configure.in ---- squid-3.1.5-orig/configure.in 2010-07-02 04:48:47.000000000 +0200 -+++ squid-3.1.5/configure.in 2010-07-25 20:25:23.000000000 +0200 +diff -ruN squid-3.1.6-orig/configure.in squid-3.1.6/configure.in +--- squid-3.1.6-orig/configure.in 2010-08-01 16:03:14.000000000 +0200 ++++ squid-3.1.6/configure.in 2010-08-10 14:50:58.000000000 +0200 @@ -3,7 +3,7 @@ dnl $Id$ dnl - AC_INIT([Squid Web Proxy],[3.1.5],[http://www.squid-cache.org/bugs/],[squid]) + AC_INIT([Squid Web Proxy],[3.1.7],[http://www.squid-cache.org/bugs/],[squid]) -AC_PREREQ(2.61) +AC_PREREQ(2.59) AC_CONFIG_HEADERS([include/autoconf.h]) AC_CONFIG_AUX_DIR(cfgaux) AC_CONFIG_SRCDIR([src/main.cc]) +@@ -71,17 +71,18 @@ + AC_DISABLE_SHARED + fi + +-LT_INIT([dlopen]) +-if ! test "${ac_top_build_prefix}" = ""; ++AC_LIBTOOL_DLOPEN ++if test $use_loadable_modules = yes; + then +- # LTDL v3-v7 macros assume the autoconf 2.62 variable top_build_prefix is defined +- # But from autoconf 2.64 its called ac_top_build_prefix and not automatically added to the Makefile +- # This fixes Linux LTDLv3-v7, and BSD LTDL v2.2 +- top_build_prefix=${ac_top_build_prefix} +- AC_SUBST(top_build_prefix) ++ dnl Linux LTDL v3-v7 macros assume the autoconf 2.62 variable top_build_prefix is defined ++ dnl But from autoconf 2.64 its called ac_top_build_prefix and not automatically added to the Makefile ++ top_build_prefix=${ac_top_build_prefix} ++ AC_SUBST(top_build_prefix) ++ ++ AC_LIBLTDL_CONVENIENCE + fi +-LTDL_INIT +-LT_LIB_DLLOAD ++AC_PROG_LIBTOOL ++AC_LTDL_DLLIB + + # Do we need these unconditionally for "make distcheck" to work? + AC_SUBST(INCLTDL) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org