Hello community,
here is the log from the commit of package autoyast2 for openSUSE:Factory
checked in at Tue Oct 20 23:46:53 CEST 2009.
--------
--- autoyast2/autoyast2.changes 2009-10-02 15:20:50.000000000 +0200
+++ autoyast2/autoyast2.changes 2009-10-16 12:31:34.000000000 +0200
@@ -1,0 +2,42 @@
+Fri Oct 16 12:27:52 CEST 2009 - ug@suse.de
+
+- 2.18.14
+
+-------------------------------------------------------------------
+Thu Oct 15 16:20:07 CEST 2009 - ug@suse.de
+
+- fixed a blocked stage2 when using autoyast=slp
+
+-------------------------------------------------------------------
+Thu Oct 15 10:36:48 CEST 2009 - ug@suse.de
+
+- possible endless loop for profiles on USB device fixed
+
+-------------------------------------------------------------------
+Wed Oct 14 12:26:41 CEST 2009 - ug@suse.de
+
+- 2.18.13
+
+-------------------------------------------------------------------
+Tue Oct 13 15:35:20 CEST 2009 - ug@suse.de
+
+- accidently selected too many patterns to install
+ (bnc#529613)
+
+-------------------------------------------------------------------
+Mon Oct 12 16:14:01 CEST 2009 - ug@suse.de
+
+- fix for "auto" in partition sizes
+
+-------------------------------------------------------------------
+Mon Oct 12 15:07:07 CEST 2009 - ug@suse.de
+
+- wrapper call fixed to append a "b" in partition sizes
+- 2.18.12
+
+-------------------------------------------------------------------
+Tue Oct 6 10:27:41 CEST 2009 - ug@suse.de
+
+- fix for "no filesystem found" when cloning
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
Old:
----
autoyast2-2.18.11.tar.bz2
New:
----
autoyast2-2.18.14.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ autoyast2.spec ++++++
--- /var/tmp/diff_new_pack.o7Z8rQ/_old 2009-10-20 23:45:48.000000000 +0200
+++ /var/tmp/diff_new_pack.o7Z8rQ/_new 2009-10-20 23:45:48.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package autoyast2 (Version 2.18.11)
+# spec file for package autoyast2 (Version 2.18.14)
#
# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
@@ -19,10 +19,10 @@
Name: autoyast2
-Version: 2.18.11
+Version: 2.18.14
Release: 1
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: autoyast2-2.18.11.tar.bz2
+Source0: autoyast2-2.18.14.tar.bz2
Prefix: /usr
Group: System/YaST
License: GPL v2 or later
@@ -55,7 +55,7 @@
%package installation
License: GPL v2 or later
-Version: 2.18.11
+Version: 2.18.14
Release: 1
Summary: YaST2 - Auto Installation Modules
Group: System/YaST
@@ -72,7 +72,7 @@
generated with the autoyast2 package.
%prep
-%setup -n autoyast2-2.18.11
+%setup -n autoyast2-2.18.14
%build
%{prefix}/bin/y2tool y2autoconf
++++++ autoyast2-2.18.11.tar.bz2 -> autoyast2-2.18.14.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/autoyast2-2.18.11/VERSION new/autoyast2-2.18.14/VERSION
--- old/autoyast2-2.18.11/VERSION 2009-10-02 15:09:14.000000000 +0200
+++ new/autoyast2-2.18.14/VERSION 2009-10-16 12:27:50.000000000 +0200
@@ -1 +1 @@
-2.18.11
+2.18.14
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/autoyast2-2.18.11/configure new/autoyast2-2.18.14/configure
--- old/autoyast2-2.18.11/configure 2009-10-02 15:09:20.000000000 +0200
+++ new/autoyast2-2.18.14/configure 2009-10-16 12:28:07.000000000 +0200
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for autoyast2 2.18.11.
+# Generated by GNU Autoconf 2.63 for autoyast2 2.18.14.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -596,8 +596,8 @@
# Identity of this package.
PACKAGE_NAME='autoyast2'
PACKAGE_TARNAME='autoyast2'
-PACKAGE_VERSION='2.18.11'
-PACKAGE_STRING='autoyast2 2.18.11'
+PACKAGE_VERSION='2.18.14'
+PACKAGE_STRING='autoyast2 2.18.14'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -1282,7 +1282,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures autoyast2 2.18.11 to adapt to many kinds of systems.
+\`configure' configures autoyast2 2.18.14 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1353,7 +1353,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of autoyast2 2.18.11:";;
+ short | recursive ) echo "Configuration of autoyast2 2.18.14:";;
esac
cat <<\_ACEOF
@@ -1433,7 +1433,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-autoyast2 configure 2.18.11
+autoyast2 configure 2.18.14
generated by GNU Autoconf 2.63
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1447,7 +1447,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by autoyast2 $as_me 2.18.11, which was
+It was created by autoyast2 $as_me 2.18.14, which was
generated by GNU Autoconf 2.63. Invocation command line was
$ $0 $@
@@ -2294,7 +2294,7 @@
# Define the identity of the package.
PACKAGE='autoyast2'
- VERSION='2.18.11'
+ VERSION='2.18.14'
cat >>confdefs.h <<_ACEOF
@@ -2518,7 +2518,7 @@
-VERSION="2.18.11"
+VERSION="2.18.14"
RPMNAME="autoyast2"
MAINTAINER="Uwe Gansert "
@@ -3577,7 +3577,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by autoyast2 $as_me 2.18.11, which was
+This file was extended by autoyast2 $as_me 2.18.14, which was
generated by GNU Autoconf 2.63. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -3627,7 +3627,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-autoyast2 config.status 2.18.11
+autoyast2 config.status 2.18.14
configured by $0, generated by GNU Autoconf 2.63,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/autoyast2-2.18.11/configure.in new/autoyast2-2.18.14/configure.in
--- old/autoyast2-2.18.11/configure.in 2009-10-02 15:09:17.000000000 +0200
+++ new/autoyast2-2.18.14/configure.in 2009-10-16 12:28:04.000000000 +0200
@@ -3,7 +3,7 @@
dnl -- This file is generated by y2autoconf 2.18.9 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(autoyast2, 2.18.11, http://bugs.opensuse.org/, autoyast2)
+AC_INIT(autoyast2, 2.18.14, http://bugs.opensuse.org/, autoyast2)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -18,7 +18,7 @@
AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
dnl Important YaST2 variables
-VERSION="2.18.11"
+VERSION="2.18.14"
RPMNAME="autoyast2"
MAINTAINER="Uwe Gansert "
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/autoyast2-2.18.11/src/clients/software_auto.ycp new/autoyast2-2.18.14/src/clients/software_auto.ycp
--- old/autoyast2-2.18.11/src/clients/software_auto.ycp 2008-10-08 17:39:21.000000000 +0200
+++ new/autoyast2-2.18.14/src/clients/software_auto.ycp 2009-10-13 15:35:59.000000000 +0200
@@ -4,7 +4,7 @@
* Authors: Anas Nashif (nashif@suse.de)
* Summary: Handle Package selections and packages
*
- * $Id: software_auto.ycp 51883 2008-10-06 15:57:54Z lslezak $
+ * $Id: software_auto.ycp 59002 2009-10-13 13:35:58Z ug $
*/
{
@@ -110,7 +110,7 @@
{
y2milestone("available patterns %1",Pkg::ResolvableProperties ("", `pattern, "") );
foreach( map p, Pkg::ResolvableProperties ("", `pattern, ""), ``{
- if( p["status"]:`nothing == `selected || p["status"]:`nothing == `installed )
+ if( p["status"]:`nothing == `selected )
patadd = add(patadd, p["name"]:"");
});
} else {
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/autoyast2-2.18.11/src/include/io.ycp new/autoyast2-2.18.14/src/include/io.ycp
--- old/autoyast2-2.18.11/src/include/io.ycp 2009-06-17 16:37:25.000000000 +0200
+++ new/autoyast2-2.18.14/src/include/io.ycp 2009-10-15 10:38:33.000000000 +0200
@@ -4,7 +4,7 @@
* Summary: I/O
* Authors: Anas Nashif
*
- * $Id: io.ycp 57619 2009-06-17 14:37:24Z ug $
+ * $Id: io.ycp 59034 2009-10-15 08:38:32Z ug $
*/
{
textdomain "autoinst";
@@ -251,6 +251,7 @@
if( !(boolean)WFM::Execute(.local.mount, [ dev, mount_point ]) ) {
y2milestone("mount failed for %1", dev);
i = i + 1;
+ dev = d["dev_name"]:"" + sformat("%1",i);
continue;
}
if (WFM::Execute (.local.bash, "/bin/cp " + mount_point + "/" + Path + " " + Localfile) != 0) {
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/autoyast2-2.18.11/src/modules/AutoinstConfig.ycp new/autoyast2-2.18.14/src/modules/AutoinstConfig.ycp
--- old/autoyast2-2.18.11/src/modules/AutoinstConfig.ycp 2009-09-30 10:32:04.000000000 +0200
+++ new/autoyast2-2.18.14/src/modules/AutoinstConfig.ycp 2009-10-15 16:20:38.000000000 +0200
@@ -4,7 +4,7 @@
* Summary: This module handles the configuration for auto-installation
* Authors: Anas Nashif
*
- * $Id: AutoinstConfig.ycp 58798 2009-09-28 06:45:39Z varkoly $
+ * $Id: AutoinstConfig.ycp 59048 2009-10-15 14:20:38Z ug $
*/
{
module "AutoinstConfig";
@@ -15,6 +15,7 @@
import "Installation";
import "URL";
import "SLP";
+ import "Stage";
include "autoinstall/xml.ycp";
@@ -342,7 +343,7 @@
*/
global define void AutoinstConfig ()
``{
- if (Mode::autoinst ())
+ if (Mode::autoinst () && Stage::initial() )
{
any autoinstall = SCR::Read(.etc.install_inf.AutoYaST);
if (autoinstall != nil && is ( autoinstall , string ) )
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/autoyast2-2.18.11/src/modules/AutoinstPartPlan.ycp new/autoyast2-2.18.14/src/modules/AutoinstPartPlan.ycp
--- old/autoyast2-2.18.11/src/modules/AutoinstPartPlan.ycp 2009-10-01 13:31:07.000000000 +0200
+++ new/autoyast2-2.18.14/src/modules/AutoinstPartPlan.ycp 2009-10-06 10:27:24.000000000 +0200
@@ -466,7 +466,6 @@
// bnc#542331 (L3: AutoYaST clone module fails to set format option for non-formatted logical volumes)
if( pe["detected_fs"]:`known == `unknown ) {
new_pe["format"] = false;
- new_pe = remove( new_pe, "filesystem" );
}
if (haskey(pe,"nr") && pe["type"]:`unknown != `lvm)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/autoyast2-2.18.11/src/modules/AutoinstStorage.ycp new/autoyast2-2.18.14/src/modules/AutoinstStorage.ycp
--- old/autoyast2-2.18.11/src/modules/AutoinstStorage.ycp 2009-10-02 12:33:40.000000000 +0200
+++ new/autoyast2-2.18.14/src/modules/AutoinstStorage.ycp 2009-10-12 16:14:30.000000000 +0200
@@ -4,7 +4,7 @@
* Summary: Storage
* Authors: Anas Nashif
*
- * $Id: AutoinstStorage.ycp 58906 2009-10-02 10:33:39Z ug $
+ * $Id: AutoinstStorage.ycp 58999 2009-10-12 14:14:29Z ug $
*/
{
module "AutoinstStorage";
@@ -75,7 +75,7 @@
global define integer humanStringToByte( string s, boolean b ) {
if( size(s) == 0 )
s = "0b";
- if( findfirstnotof( s, "1234567890" ) == nil )
+ if( findfirstof( s, "bB" ) == nil )
s = s + "b";
return Storage::ClassicStringToByte(s);
}
@@ -529,6 +529,19 @@
settings = region4resize(settings);
settings = percent2size(settings);
settings = setPartitionType(settings);
+ settings = maplist( map d, settings, ``{
+ d["partitions"] = maplist(map pe, d["partitions"]:[], ``{
+ if( haskey( pe, "size" ) ) {
+ if( pe["size"]:"" == "auto" && pe["mount"]:"" == "swap" )
+ pe["size"] = sformat( "%1", 1024*1024*Partitions::SwapSizeMb(0) );
+ else if( pe["size"]:"" == "auto" && pe["mount"]:"" == "/boot" )
+ pe["size"] = sformat( "%1", Partitions::MinimalNeededBootsize() );
+ pe["size"] = sformat("%1",humanStringToByte(pe["size"]:"", false));
+ }
+ return pe;
+ });
+ return d;
+ });
AutoPartPlan = preprocess_partition_config(settings);
AutoPartPlan = checkSizes(AutoPartPlan);
} else {
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org