Hello community,
here is the log from the commit of package yast2-storage for openSUSE:Factory
checked in at Mon Oct 12 16:08:38 CEST 2009.
--------
--- yast2-storage/yast2-storage.changes 2009-09-29 17:21:48.000000000 +0200
+++ /mounts/work_src_done/STABLE/yast2-storage/yast2-storage.changes 2009-10-09 10:23:16.000000000 +0200
@@ -1,0 +2,6 @@
+Mon Oct 05 17:50:59 CEST 2009 - aschnell@suse.de
+
+- improved popup message (bnc #544169)
+- 2.18.19
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
Old:
----
yast2-storage-2.18.18.tar.bz2
New:
----
yast2-storage-2.18.19.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-storage.spec ++++++
--- /var/tmp/diff_new_pack.oV1d0h/_old 2009-10-12 16:06:57.000000000 +0200
+++ /var/tmp/diff_new_pack.oV1d0h/_new 2009-10-12 16:06:57.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-storage (Version 2.18.18)
+# spec file for package yast2-storage (Version 2.18.19)
#
# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
@@ -19,10 +19,10 @@
Name: yast2-storage
-Version: 2.18.18
-Release: 4
+Version: 2.18.19
+Release: 1
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-storage-2.18.18.tar.bz2
+Source0: yast2-storage-2.18.19.tar.bz2
Prefix: /usr
Group: System/YaST
License: GPL v2 or later
@@ -52,7 +52,7 @@
devices during installation and on an installed system.
%prep
-%setup -n yast2-storage-2.18.18
+%setup -n yast2-storage-2.18.19
%build
%{prefix}/bin/y2tool y2autoconf
++++++ yast2-storage-2.18.18.tar.bz2 -> yast2-storage-2.18.19.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-storage-2.18.18/VERSION new/yast2-storage-2.18.19/VERSION
--- old/yast2-storage-2.18.18/VERSION 2009-07-31 11:03:43.000000000 +0200
+++ new/yast2-storage-2.18.19/VERSION 2009-10-05 17:50:51.000000000 +0200
@@ -1 +1 @@
-2.18.18
+2.18.19
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-storage-2.18.18/configure new/yast2-storage-2.18.19/configure
--- old/yast2-storage-2.18.18/configure 2009-09-29 16:40:33.000000000 +0200
+++ new/yast2-storage-2.18.19/configure 2009-10-09 10:22:06.000000000 +0200
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for yast2-storage 2.18.18.
+# Generated by GNU Autoconf 2.63 for yast2-storage 2.18.19.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -745,8 +745,8 @@
# Identity of this package.
PACKAGE_NAME='yast2-storage'
PACKAGE_TARNAME='yast2-storage'
-PACKAGE_VERSION='2.18.18'
-PACKAGE_STRING='yast2-storage 2.18.18'
+PACKAGE_VERSION='2.18.19'
+PACKAGE_STRING='yast2-storage 2.18.19'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -1532,7 +1532,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures yast2-storage 2.18.18 to adapt to many kinds of systems.
+\`configure' configures yast2-storage 2.18.19 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1603,7 +1603,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of yast2-storage 2.18.18:";;
+ short | recursive ) echo "Configuration of yast2-storage 2.18.19:";;
esac
cat <<\_ACEOF
@@ -1713,7 +1713,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-yast2-storage configure 2.18.18
+yast2-storage configure 2.18.19
generated by GNU Autoconf 2.63
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1727,7 +1727,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by yast2-storage $as_me 2.18.18, which was
+It was created by yast2-storage $as_me 2.18.19, which was
generated by GNU Autoconf 2.63. Invocation command line was
$ $0 $@
@@ -2574,7 +2574,7 @@
# Define the identity of the package.
PACKAGE='yast2-storage'
- VERSION='2.18.18'
+ VERSION='2.18.19'
cat >>confdefs.h <<_ACEOF
@@ -2798,7 +2798,7 @@
-VERSION="2.18.18"
+VERSION="2.18.19"
RPMNAME="yast2-storage"
MAINTAINER="Arvin Schnell "
@@ -17259,7 +17259,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by yast2-storage $as_me 2.18.18, which was
+This file was extended by yast2-storage $as_me 2.18.19, which was
generated by GNU Autoconf 2.63. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -17322,7 +17322,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-yast2-storage config.status 2.18.18
+yast2-storage config.status 2.18.19
configured by $0, generated by GNU Autoconf 2.63,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-storage-2.18.18/configure.in new/yast2-storage-2.18.19/configure.in
--- old/yast2-storage-2.18.18/configure.in 2009-09-29 16:40:24.000000000 +0200
+++ new/yast2-storage-2.18.19/configure.in 2009-10-09 10:21:57.000000000 +0200
@@ -3,7 +3,7 @@
dnl -- This file is generated by y2autoconf 2.18.11 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-storage, 2.18.18, http://bugs.opensuse.org/, yast2-storage)
+AC_INIT(yast2-storage, 2.18.19, http://bugs.opensuse.org/, yast2-storage)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -18,7 +18,7 @@
AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
dnl Important YaST2 variables
-VERSION="2.18.18"
+VERSION="2.18.19"
RPMNAME="yast2-storage"
MAINTAINER="Arvin Schnell "
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-storage-2.18.18/storage/src/include/custom_part_check_generated.ycp new/yast2-storage-2.18.19/storage/src/include/custom_part_check_generated.ycp
--- old/yast2-storage-2.18.18/storage/src/include/custom_part_check_generated.ycp 2009-07-23 18:39:59.000000000 +0200
+++ new/yast2-storage-2.18.19/storage/src/include/custom_part_check_generated.ycp 2009-10-05 17:50:40.000000000 +0200
@@ -217,8 +217,8 @@
// popup text
string message = _("You tried to mount a fat partition to one of
the following mount points: / /usr /home /opt /var. This will very likely
-cause problems. Use a Linux file system, such as ext3, ext4 or reiserfs, for
-these mount points.
+cause problems. Use a Linux file system, such as ext3 or ext4, for these mount
+points.
Really use this setup?
");
@@ -232,7 +232,7 @@
// popup text
string message = _("You tried to mount a fat partition to the
mount point /boot. This will very likely cause problems. Use a Linux file
-system, such as ext3, ext4 or reiserfs, for this mount point.
+system, such as ext3 or ext4, for this mount point.
Really use this setup?
");
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-storage-2.18.18/storage/src/modules/Storage.ycp new/yast2-storage-2.18.19/storage/src/modules/Storage.ycp
--- old/yast2-storage-2.18.18/storage/src/modules/Storage.ycp 2009-08-28 17:10:15.000000000 +0200
+++ new/yast2-storage-2.18.19/storage/src/modules/Storage.ycp 2009-10-06 12:27:23.000000000 +0200
@@ -19,7 +19,7 @@
* wurde versucht "intelligent" zu gestallten und ist im einzelen bei den
* entspechenden Funktionen n�her erkl�rt.
*
- * $Id: Storage.ycp 58444 2009-08-27 13:53:51Z aschnell $
+ * $Id: Storage.ycp 58951 2009-10-06 10:27:39Z aschnell $
*/
{
module "Storage";
@@ -931,34 +931,6 @@
}
-/**
- * Adds ... and returns the changed map
- *
- * @param map targets
- * @return map targets
- */
-global define map AddWinInfo( map targets )
- ``{
- y2milestone( "AddWinInfo called" );
- foreach(string disk, map data, targets,
- ``{
- targets[disk,"partitions"] =
- maplist(map p, data["partitions"]:[],
- ``{
- if( Partitions::IsDosWinNtPartition(p["fsid"]:0) &&
- contains( [ `ntfs, `vfat ], p["used_fs"]:`none ))
- {
- p["winfo"] = GetFreeSpace( p["device"]:"", 0,
- p["used_fs"]:`none, false );
- y2milestone( "AddWinInfo %1", p );
- }
- return( p );
- });
- });
- return( targets );
- };
-
-
global string SaveDumpPath(string name)
{
string ret = Directory::tmpdir + "/" + name;
@@ -2999,6 +2971,7 @@
});
};
+
global define void AddMountPointsForWin( map targets )
``{
y2milestone( "AddMountPointsForWin called" );
@@ -3020,6 +2993,7 @@
});
}
+
/**
* Removes ... maps to ...
*
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-storage-2.18.18/storage/src/modules/StorageProposal.ycp new/yast2-storage-2.18.19/storage/src/modules/StorageProposal.ycp
--- old/yast2-storage-2.18.18/storage/src/modules/StorageProposal.ycp 2009-09-25 12:25:22.000000000 +0200
+++ new/yast2-storage-2.18.19/storage/src/modules/StorageProposal.ycp 2009-10-06 12:26:16.000000000 +0200
@@ -318,6 +318,26 @@
}
+ map AddWinInfo(map targets)
+ {
+ y2milestone("AddWinInfo called");
+ foreach(string disk, map data, targets, {
+ targets[disk, "partitions"] =
+ maplist(map p, data["partitions"]:[], {
+ if (Partitions::IsDosWinNtPartition(p["fsid"]:0) &&
+ contains([ `ntfs, `vfat ], p["used_fs"]:`none))
+ {
+ p["winfo"] = Storage::GetFreeSpace(p["device"]:"", 0,
+ p["used_fs"]:`none, false);
+ y2milestone("AddWinInfo %1", p);
+ }
+ return p;
+ });
+ });
+ return targets;
+ }
+
+
map swapable = $[];
@@ -2917,7 +2937,7 @@
y2milestone( "get_inst_proposal start" );
flex_init_swapable( target );
map ret = $[];
- target = Storage::AddWinInfo(target);
+ target = AddWinInfo(target);
ret["target"] = target;
map root = $[ "mount" : "/", "increasable" : true,
"fsys" : Partitions::DefaultFs(), "size" : 0 ];
@@ -3662,7 +3682,7 @@
target = remove_mount_points(target);
if( size(vg_key)==0 )
target = remove_vm(target,key);
- target = Storage::AddWinInfo(target);
+ target = AddWinInfo(target);
ret["target"] = target;
map boot = $[ "mount" : Partitions::BootMount(),
"size" : Partitions::MinimalNeededBootsize(),
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-storage-2.18.18/storage.pot new/yast2-storage-2.18.19/storage.pot
--- old/yast2-storage-2.18.18/storage.pot 2009-09-29 16:51:05.000000000 +0200
+++ new/yast2-storage-2.18.19/storage.pot 2009-10-06 12:27:51.000000000 +0200
@@ -8,7 +8,7 @@
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-09-29 16:51+0200\n"
+"POT-Creation-Date: 2009-10-06 12:27+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME \n"
"Language-Team: LANGUAGE \n"
@@ -228,8 +228,8 @@
msgid ""
"You tried to mount a fat partition to one of\n"
"the following mount points: / /usr /home /opt /var. This will very likely\n"
-"cause problems. Use a Linux file system, such as ext3, ext4 or reiserfs, for\n"
-"these mount points.\n"
+"cause problems. Use a Linux file system, such as ext3 or ext4, for these mount\n"
+"points.\n"
"\n"
"Really use this setup?\n"
msgstr ""
@@ -239,7 +239,7 @@
msgid ""
"You tried to mount a fat partition to the\n"
"mount point /boot. This will very likely cause problems. Use a Linux file\n"
-"system, such as ext3, ext4 or reiserfs, for this mount point.\n"
+"system, such as ext3 or ext4, for this mount point.\n"
"\n"
"Really use this setup?\n"
msgstr ""
@@ -608,7 +608,7 @@
#. popup text
#: storage/src/include/custom_part_dialogs.ycp:314
-#: storage/src/modules/Storage.ycp:5347
+#: storage/src/modules/Storage.ycp:5321
msgid ""
"You did not enter a password.\n"
"Try again.\n"
@@ -616,7 +616,7 @@
#. popup text
#: storage/src/include/custom_part_dialogs.ycp:325
-#: storage/src/modules/Storage.ycp:5358
+#: storage/src/modules/Storage.ycp:5332
#, ycp-format
msgid ""
"The password must have at least %1 characters.\n"
@@ -1593,7 +1593,7 @@
#. tab heading
#. push button text
#: storage/src/include/ep-dm.ycp:171 storage/src/include/ep-hd.ycp:382
-#: storage/src/include/ep-lvm.ycp:331 storage/src/include/ep-raid.ycp:214
+#: storage/src/include/ep-lvm.ycp:337 storage/src/include/ep-raid.ycp:214
msgid "&Overview"
msgstr ""
@@ -1747,7 +1747,7 @@
msgstr ""
#. popup text
-#: storage/src/include/ep-hd-lib.ycp:97 storage/src/include/ep-lib.ycp:168
+#: storage/src/include/ep-hd-lib.ycp:97 storage/src/include/ep-lib.ycp:181
#, ycp-format
msgid "Really delete BIOS RAID %1?"
msgstr ""
@@ -1899,8 +1899,8 @@
msgstr ""
#. push button text
-#: storage/src/include/ep-hd.ycp:281 storage/src/include/ep-lvm.ycp:161
-#: storage/src/include/ep-lvm.ycp:251
+#: storage/src/include/ep-hd.ycp:281 storage/src/include/ep-lvm.ycp:167
+#: storage/src/include/ep-lvm.ycp:257
msgid "Add..."
msgstr ""
@@ -1949,11 +1949,11 @@
"selected partition.</p>"
msgstr ""
-#: storage/src/include/ep-lib.ycp:83
+#: storage/src/include/ep-lib.ycp:96
msgid "Confirm Deleting Partition Used by LVM"
msgstr ""
-#: storage/src/include/ep-lib.ycp:84
+#: storage/src/include/ep-lib.ycp:97
#, ycp-format
msgid ""
"The selected partition is used by volume group \"%1\"\n"
@@ -1961,16 +1961,16 @@
"and its logical volumes will be deleted:"
msgstr ""
-#: storage/src/include/ep-lib.ycp:87
+#: storage/src/include/ep-lib.ycp:100
#, ycp-format
msgid "Delete partition \"%1\" and volume group \"%2\" now?"
msgstr ""
-#: storage/src/include/ep-lib.ycp:94
+#: storage/src/include/ep-lib.ycp:107
msgid "Confirm Deleting Partition Used by RAID"
msgstr ""
-#: storage/src/include/ep-lib.ycp:95
+#: storage/src/include/ep-lib.ycp:108
#, ycp-format
msgid ""
"The selected partition belongs to RAID \"%1\"\n"
@@ -1978,13 +1978,13 @@
"RAID device will be deleted:"
msgstr ""
-#: storage/src/include/ep-lib.ycp:98
+#: storage/src/include/ep-lib.ycp:111
#, ycp-format
msgid "Delete partition \"%1\" and RAID \"%2\" now?"
msgstr ""
#. YesNo popup text %1 is replaced by a disk name e.g. /dev/hda
-#: storage/src/include/ep-lib.ycp:176
+#: storage/src/include/ep-lib.ycp:189
#, ycp-format
msgid "Really delete all partitions on %1?"
msgstr ""
@@ -1992,40 +1992,40 @@
#. ///////////////////////////////////////////////////
#. now delete partition!!
#. YesNo popup text, %1 is replaced by a device name e.g. /dev/hda1
-#: storage/src/include/ep-lib.ycp:240
+#: storage/src/include/ep-lib.ycp:253
#, ycp-format
msgid "Really delete %1?"
msgstr ""
#. YesNo popup. %1 is path to a file
-#: storage/src/include/ep-lib.ycp:248
+#: storage/src/include/ep-lib.ycp:261
#, ycp-format
msgid ""
"\n"
"Should the loop file %1 also be removed?\n"
msgstr ""
-#: storage/src/include/ep-lib.ycp:328
+#: storage/src/include/ep-lib.ycp:341
msgid "Unpartitioned Space"
msgstr ""
-#: storage/src/include/ep-lib.ycp:406
+#: storage/src/include/ep-lib.ycp:419
msgid "Unallocated Space"
msgstr ""
-#: storage/src/include/ep-lib.ycp:419
+#: storage/src/include/ep-lib.ycp:432
msgid "<p>No changes to partitioning.</p>"
msgstr ""
-#: storage/src/include/ep-lib.ycp:421
+#: storage/src/include/ep-lib.ycp:434
msgid "<p>Changes to partitioning:</p>"
msgstr ""
-#: storage/src/include/ep-lib.ycp:423
+#: storage/src/include/ep-lib.ycp:436
msgid "<p>No changes to storage settings.</p>"
msgstr ""
-#: storage/src/include/ep-lib.ycp:425
+#: storage/src/include/ep-lib.ycp:438
msgid "<p>Storage settings:</p>"
msgstr ""
@@ -2400,72 +2400,72 @@
msgid "Add Logical Volume"
msgstr ""
-#: storage/src/include/ep-lvm.ycp:147
+#: storage/src/include/ep-lvm.ycp:153
msgid "Volume Group"
msgstr ""
-#: storage/src/include/ep-lvm.ycp:150
+#: storage/src/include/ep-lvm.ycp:156
msgid "Logical Volume"
msgstr ""
#. heading
#. tree node label
-#: storage/src/include/ep-lvm.ycp:156 storage/src/include/ep-main.ycp:193
+#: storage/src/include/ep-lvm.ycp:162 storage/src/include/ep-main.ycp:193
msgid "Volume Management"
msgstr ""
#. helptext
-#: storage/src/include/ep-lvm.ycp:170
+#: storage/src/include/ep-lvm.ycp:176
msgid ""
"<p>This view shows all LVM volume groups and\n"
"their logical volumes.</p>"
msgstr ""
#. helptext
-#: storage/src/include/ep-lvm.ycp:210
+#: storage/src/include/ep-lvm.ycp:216
msgid ""
"<p>This view shows detailed information about the\n"
"selected volume group.</p>"
msgstr ""
#. helptext
-#: storage/src/include/ep-lvm.ycp:259
+#: storage/src/include/ep-lvm.ycp:265
msgid ""
"<p>This view shows all logical volumes of the\n"
"selected volume group.</p>"
msgstr ""
#. helptext
-#: storage/src/include/ep-lvm.ycp:309
+#: storage/src/include/ep-lvm.ycp:315
msgid ""
"<p>This view shows all physical volumes used by\n"
"the selected volume group.</p>"
msgstr ""
#. heading
-#: storage/src/include/ep-lvm.ycp:328
+#: storage/src/include/ep-lvm.ycp:334
#, ycp-format
msgid "Volume Group: %1"
msgstr ""
#. push button text
-#: storage/src/include/ep-lvm.ycp:333
+#: storage/src/include/ep-lvm.ycp:339
msgid "&Logical Volumes"
msgstr ""
#. push button text
-#: storage/src/include/ep-lvm.ycp:335
+#: storage/src/include/ep-lvm.ycp:341
msgid "&Physical Volumes"
msgstr ""
#. heading
-#: storage/src/include/ep-lvm.ycp:367
+#: storage/src/include/ep-lvm.ycp:373
#, ycp-format
msgid "Logical Volume: %1"
msgstr ""
#. helptext
-#: storage/src/include/ep-lvm.ycp:378
+#: storage/src/include/ep-lvm.ycp:384
msgid ""
"<p>This view shows detailed information about the\n"
"selected logical volume.</p>"
@@ -2506,7 +2506,7 @@
msgstr ""
#. popup text, %1 will be replaces with button text
-#: storage/src/include/ep-main.ycp:291
+#: storage/src/include/ep-main.ycp:282
#, ycp-format
msgid ""
"You have changed the partitioning or storage settings. These changes\n"
@@ -2515,16 +2515,16 @@
msgstr ""
#. helptext
-#: storage/src/include/ep-main.ycp:302
+#: storage/src/include/ep-main.ycp:293
msgid "<p>Here you can see the partitioning summary.</p>"
msgstr ""
-#: storage/src/include/ep-main.ycp:316
+#: storage/src/include/ep-main.ycp:307
msgid ": Summary"
msgstr ""
#. tree node label
-#: storage/src/include/ep-main.ycp:390
+#: storage/src/include/ep-main.ycp:381
msgid "System View"
msgstr ""
@@ -3937,7 +3937,7 @@
msgid "Resize Not Possible:"
msgstr ""
-#: storage/src/modules/Storage.ycp:2228
+#: storage/src/modules/Storage.ycp:2200
#, ycp-format
msgid ""
"Could not set encryption.\n"
@@ -3946,7 +3946,7 @@
"The crypt password provided could be incorrect.\n"
msgstr ""
-#: storage/src/modules/Storage.ycp:3601
+#: storage/src/modules/Storage.ycp:3575
#, ycp-format
msgid ""
"\n"
@@ -3954,7 +3954,7 @@
"that is needed to run the installation.\n"
msgstr ""
-#: storage/src/modules/Storage.ycp:3614
+#: storage/src/modules/Storage.ycp:3588
#, ycp-format
msgid ""
"\n"
@@ -3962,7 +3962,7 @@
"data needed to perform the installation.\n"
msgstr ""
-#: storage/src/modules/Storage.ycp:3635
+#: storage/src/modules/Storage.ycp:3609
#, ycp-format
msgid ""
"\n"
@@ -3970,7 +3970,7 @@
"that is needed to run the installation.\n"
msgstr ""
-#: storage/src/modules/Storage.ycp:3642
+#: storage/src/modules/Storage.ycp:3616
#, ycp-format
msgid ""
"\n"
@@ -3978,7 +3978,7 @@
"data needed to perform the installation.\n"
msgstr ""
-#: storage/src/modules/Storage.ycp:3668
+#: storage/src/modules/Storage.ycp:3642
#, ycp-format
msgid ""
"\n"
@@ -3987,7 +3987,7 @@
"the installation.\n"
msgstr ""
-#: storage/src/modules/Storage.ycp:3676
+#: storage/src/modules/Storage.ycp:3650
#, ycp-format
msgid ""
"\n"
@@ -3995,13 +3995,13 @@
"device %2 which contains data needed to perform the installation.\n"
msgstr ""
-#: storage/src/modules/Storage.ycp:4284
+#: storage/src/modules/Storage.ycp:4258
#, ycp-format
msgid "Add the following resolvables failed: %1"
msgstr ""
#. popup text
-#: storage/src/modules/Storage.ycp:5336
+#: storage/src/modules/Storage.ycp:5310
msgid ""
"The first and the second version\n"
"of the password do not match.\n"
@@ -4009,7 +4009,7 @@
msgstr ""
#. popup text
-#: storage/src/modules/Storage.ycp:5368
+#: storage/src/modules/Storage.ycp:5342
msgid ""
"The password may only contain the following characters:\n"
"0..9, a..z, A..Z, and any of \"@#* ,.;:._-+!$%&/|?{[()]}^\\<>\".\n"
@@ -4601,8 +4601,8 @@
msgid "<p>The overview contains:</p>"
msgstr ""
-#: storage/src/modules/StorageProposal.ycp:2955
-#: storage/src/modules/StorageProposal.ycp:3707
+#: storage/src/modules/StorageProposal.ycp:2975
+#: storage/src/modules/StorageProposal.ycp:3727
msgid "Resize impossible due to inconsistent fs. Try checking fs under Windows."
msgstr ""
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org