Hello community,
here is the log from the commit of package yast2-network
checked in at Wed Nov 5 18:22:55 CET 2008.
--------
--- yast2-network/yast2-network.changes 2008-11-03 14:40:27.000000000 +0100
+++ /mounts/work_src_done/STABLE/yast2-network/yast2-network.changes 2008-11-05 18:22:05.718095000 +0100
@@ -1,0 +2,8 @@
+Wed Nov 5 16:49:02 CET 2008 - mzugec@suse.cz
+
+- in case of proposed bridger network do "rcnetwork restart"
+(timeout popup confirmation) also for vnc/ssh/x11 installation
+(bnc#431500)
+- 2.14.51
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
Old:
----
yast2-network-2.17.50.tar.bz2
New:
----
yast2-network-2.17.51.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-network.spec ++++++
--- /var/tmp/diff_new_pack.p14377/_old 2008-11-05 18:22:48.000000000 +0100
+++ /var/tmp/diff_new_pack.p14377/_new 2008-11-05 18:22:48.000000000 +0100
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-network (Version 2.17.50)
+# spec file for package yast2-network (Version 2.17.51)
#
# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
@@ -19,12 +19,12 @@
Name: yast2-network
-Version: 2.17.50
+Version: 2.17.51
Release: 1
License: GPL v2 or later
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-network-2.17.50.tar.bz2
+Source0: yast2-network-2.17.51.tar.bz2
Prefix: /usr
# should be required by devtools
BuildRequires: perl-XML-Writer pkgconfig rpm
@@ -79,7 +79,7 @@
Michal Svec
%prep
-%setup -n yast2-network-2.17.50
+%setup -n yast2-network-2.17.51
%build
%{prefix}/bin/y2tool y2autoconf
@@ -144,6 +144,11 @@
%exclude %{prefix}/share/doc/packages/yast2-network/README
%changelog
+* Wed Nov 05 2008 mzugec@suse.cz
+- in case of proposed bridger network do "rcnetwork restart"
+ (timeout popup confirmation) also for vnc/ssh/x11 installation
+ (bnc#431500)
+- 2.14.51
* Fri Oct 31 2008 mzugec@suse.de
- for devices without hwinfo (bridge, vlan, ...) dont propose
STARTMODE ifpluge, propose STARTMODE='auto'
@@ -709,7 +714,7 @@
* Wed Aug 15 2007 mzugec@suse.cz
- for NM enable to change default gateway (#299448)
- 2.15.62
-* Wed Aug 15 2007 mzugec@suse.de
+* Tue Aug 14 2007 mzugec@suse.de
- save network configuration also when smpppd/kinternet not available
for USERCONTROL enabled devices (#299033)
- 2.15.61
@@ -1567,7 +1572,7 @@
* Sat Mar 19 2005 nashif@suse.de
- DSL: Offer Point to Point Tunneling Protocol again (#73043)
- V 2.11.29
-* Sat Mar 19 2005 nashif@suse.de
+* Fri Mar 18 2005 nashif@suse.de
- Do not set empty UNIQUE when autoinstalling (#73922)
* Fri Mar 18 2005 mvidner@suse.cz
- DSL: do not offer Point to Point Tunneling Protocol,
@@ -1814,7 +1819,7 @@
* Wed Sep 01 2004 mvidner@suse.cz
- Fixed configuring the dummy interface (#44582).
- Another try at detecting KDE because of kinternet (#43556).
-* Tue Aug 31 2004 nashif@suse.de
+* Mon Aug 30 2004 nashif@suse.de
- Fixed lan_auto to handle different devices (#44014)
- use modified flag (#43904) in auto clients
* Mon Aug 30 2004 mvidner@suse.cz
@@ -2158,7 +2163,7 @@
* Tue Feb 10 2004 msvec@suse.cz
- typo in shellcommand (may affect #29452, #33049)
- 2.9.3
-* Sun Feb 08 2004 msvec@suse.cz
+* Sat Feb 07 2004 msvec@suse.cz
- ISDN compiles and seems to work
- NVidia cards should be supported now (#25531)
- 2.9.2
@@ -2230,12 +2235,12 @@
* Wed Sep 10 2003 msvec@suse.cz
- fixed log erros possible affecting the detection (#30424)
- 2.8.31
-* Tue Sep 09 2003 kkeil@suse.de
+* Mon Sep 08 2003 kkeil@suse.de
- fix lost of firewall settings (#29103)
- do not start smpppd and kinternet if no isdn interface was
configured (#18831)
- run drdsl if a new DSL-ISDN card was configured (#30294)
-* Tue Sep 09 2003 msvec@suse.cz
+* Mon Sep 08 2003 msvec@suse.cz
- hardware detection emulation for AVM DSL cards (#30294)
- 2.8.30
* Mon Sep 08 2003 msvec@suse.cz
@@ -2269,7 +2274,7 @@
* Tue Sep 02 2003 nashif@suse.de
- fixed testsuite
- 2.8.21
-* Tue Sep 02 2003 nashif@suse.de
+* Mon Sep 01 2003 nashif@suse.de
- Fixed kernel module handling in normal and autoinst mode
- Added Package function to auto client
- 2.8.20
@@ -2757,7 +2762,7 @@
- minor documentation fixes
- enhanced testsuite
- 2.5.47
-* Thu Mar 14 2002 kkeil@suse.de
+* Wed Mar 13 2002 kkeil@suse.de
- don't reload driver, if only interface data was changed (#14865)
- call Provider::Commit only if needed (#14145)
- 2.5.46
@@ -2967,7 +2972,7 @@
- preliminary work for modems and isdn config
- modems and isdn summary and overview screens
- 2.5.9
-* Tue Jan 29 2002 nashif@suse.de
+* Mon Jan 28 2002 nashif@suse.de
- Adapted for auto-installation
- 2.5.8
* Mon Jan 28 2002 msvec@suse.cz
@@ -3067,7 +3072,7 @@
- fixed complex dialog
- fixed hostname settings
- 2.4.7
-* Fri Aug 31 2001 ro@suse.de
+* Thu Aug 30 2001 ro@suse.de
- added <libycp-devel> to neededforbuild (for testsuite)
* Wed Aug 22 2001 dan@suse.cz
- static DNS enabled for ISDN flow (also #6020)
@@ -3207,7 +3212,7 @@
- bugfixes
* Wed Jan 10 2001 smid@suse.cz
- bugfixes (xauth, saving)
-* Wed Jan 10 2001 dan@suse.cz
+* Tue Jan 09 2001 dan@suse.cz
- new configuration workflow (another version :))
* Thu Jan 04 2001 dan@suse.cz
- new configuration workflow
++++++ yast2-network-2.17.50.tar.bz2 -> yast2-network-2.17.51.tar.bz2 ++++++
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.17.50/configure new/yast2-network-2.17.51/configure
--- old/yast2-network-2.17.50/configure 2008-10-31 12:16:46.000000000 +0100
+++ new/yast2-network-2.17.51/configure 2008-11-05 16:46:15.000000000 +0100
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for yast2-network 2.17.49.
+# Generated by GNU Autoconf 2.63 for yast2-network 2.17.50.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -596,8 +596,8 @@
# Identity of this package.
PACKAGE_NAME='yast2-network'
PACKAGE_TARNAME='yast2-network'
-PACKAGE_VERSION='2.17.49'
-PACKAGE_STRING='yast2-network 2.17.49'
+PACKAGE_VERSION='2.17.50'
+PACKAGE_STRING='yast2-network 2.17.50'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -1274,7 +1274,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures yast2-network 2.17.49 to adapt to many kinds of systems.
+\`configure' configures yast2-network 2.17.50 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1345,7 +1345,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of yast2-network 2.17.49:";;
+ short | recursive ) echo "Configuration of yast2-network 2.17.50:";;
esac
cat <<\_ACEOF
@@ -1425,7 +1425,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-yast2-network configure 2.17.49
+yast2-network configure 2.17.50
generated by GNU Autoconf 2.63
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1439,7 +1439,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by yast2-network $as_me 2.17.49, which was
+It was created by yast2-network $as_me 2.17.50, which was
generated by GNU Autoconf 2.63. Invocation command line was
$ $0 $@
@@ -2286,7 +2286,7 @@
# Define the identity of the package.
PACKAGE='yast2-network'
- VERSION='2.17.49'
+ VERSION='2.17.50'
cat >>confdefs.h <<_ACEOF
@@ -2510,7 +2510,7 @@
-VERSION="2.17.49"
+VERSION="2.17.50"
RPMNAME="yast2-network"
MAINTAINER="Michal Zugec "
@@ -3451,7 +3451,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by yast2-network $as_me 2.17.49, which was
+This file was extended by yast2-network $as_me 2.17.50, which was
generated by GNU Autoconf 2.63. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -3501,7 +3501,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-yast2-network config.status 2.17.49
+yast2-network config.status 2.17.50
configured by $0, generated by GNU Autoconf 2.63,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.17.50/configure.in new/yast2-network-2.17.51/configure.in
--- old/yast2-network-2.17.50/configure.in 2008-10-31 12:16:39.000000000 +0100
+++ new/yast2-network-2.17.51/configure.in 2008-11-05 16:46:08.000000000 +0100
@@ -3,7 +3,7 @@
dnl -- This file is generated by y2autoconf 2.17.6 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-network, 2.17.49, http://bugs.opensuse.org/, yast2-network)
+AC_INIT(yast2-network, 2.17.50, http://bugs.opensuse.org/, yast2-network)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -18,7 +18,7 @@
AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
dnl Important YaST2 variables
-VERSION="2.17.49"
+VERSION="2.17.50"
RPMNAME="yast2-network"
MAINTAINER="Michal Zugec "
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.17.50/src/clients/lan_proposal.ycp new/yast2-network-2.17.51/src/clients/lan_proposal.ycp
--- old/yast2-network-2.17.50/src/clients/lan_proposal.ycp 2008-10-30 09:32:56.000000000 +0100
+++ new/yast2-network-2.17.51/src/clients/lan_proposal.ycp 2008-11-05 16:56:54.000000000 +0100
@@ -4,7 +4,7 @@
* Summary: Lan configuration proposal
* Authors: Michal Svec
*
- * $Id: lan_proposal.ycp 52719 2008-10-30 08:32:55Z mzugec $
+ * $Id: lan_proposal.ycp 52943 2008-11-05 15:56:53Z mzugec $
*/
{
@@ -131,7 +131,7 @@
// popup already shown
y2error("Packages installation failure, not saving");
}
- else if (Linuxrc::display_ip () || Linuxrc::vnc () || Linuxrc::usessh () )
+ else if ((!Lan::virt_net_proposal) && (Linuxrc::display_ip () || Linuxrc::vnc () || Linuxrc::usessh ()) )
{
y2milestone ("write only");
Lan::WriteOnly();
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.17.50/src/modules/Lan.ycp new/yast2-network-2.17.51/src/modules/Lan.ycp
--- old/yast2-network-2.17.50/src/modules/Lan.ycp 2008-10-30 10:54:17.000000000 +0100
+++ new/yast2-network-2.17.51/src/modules/Lan.ycp 2008-11-05 16:56:54.000000000 +0100
@@ -4,7 +4,7 @@
* Summary: Network card data
* Authors: Michal Svec
*
- * $Id: Lan.ycp 52772 2008-10-31 07:56:11Z mzugec $
+ * $Id: Lan.ycp 52943 2008-11-05 15:56:53Z mzugec $
*
* Representation of the configuration of network cards.
* Input and output routines.
@@ -42,6 +42,7 @@
import "Linuxrc";
import "Stage";
import "LanUdevAuto";
+import "Label";
include "network/complex.ycp";
include "network/runtime.ycp";
@@ -438,9 +439,45 @@
// during installation export sysconfig settings into NetworkManager (bnc#433084)
if (Mode::installation() && NetworkService::IsManaged()) y2internal("Export sysconfig settings into NetworkManager %1", SCR::Execute(.target.bash_output, "/usr/lib/NetworkManager/nm-opensuse-sysconfig-merge --connections"));
+y2internal("virt_net_proposal %1", virt_net_proposal);
+ if (Stage::cont() && virt_net_proposal && (Linuxrc::usessh() || Linuxrc::vnc() || Linuxrc::display_ip())){
+ UI::OpenDialog(`opt(`decorated), `HBox(
+ `HSpacing(1),
+ `HCenter(`HSquash(`VBox(
+ `HCenter(`HSquash(`VBox(
+ // This is the heading of the popup box
+ `Left(`Heading(_("Confirm Network Restart"))),
+ `VSpacing(0.5),
+ // This is in information message. Next come the
+ // hardware class name (network cards).
+ `HVCenter(`Label(_("Because of bridged network YaST2 needs to restart network to apply the settings."))),
+ `VSpacing(0.5)
+ ))),
+ `ButtonBox (
+ `HWeight (1, `PushButton (`id(`ok), `opt(`default, `okButton), Label::OKButton())),
+ /* PushButton label */
+ `HWeight (1, `PushButton (`id (`cancel), `opt (`cancelButton), Label::CancelButton()))
+ ),
+ `VSpacing(0.2)
+ ))),
+ `HSpacing(1)
+ ));
+
+ UI::SetFocus (`id(`ok));
+
+ // for autoinstallation popup has timeout 10 seconds (#192181)
+ // timeout for every case (bnc#429562)
+ any ret = UI::TimeoutUserInput(10*1000);
+ if (ret==`ok){
+ y2internal("Restarting network because of bridged proposal");
+ Service::Restart("network");
+ }
+ UI::CloseDialog();
+ }
+
// For ssh/vnc installation don't reload/restart network because possibility of IP change (bnc#347482)
- if (Stage::cont() && (Linuxrc::usessh() || Linuxrc::vnc())) y2milestone("For ssh or vnc installation don't reload/restart network during installation.");
- else if (LanItems::force_restart) Service::Restart("network");
+ else if (Stage::cont() && (Linuxrc::usessh() || Linuxrc::vnc() || Linuxrc::display_ip())) y2milestone("For ssh or vnc installation don't reload/restart network during installation.");
+ else if (LanItems::force_restart) Service::Restart("network");
else if(Service::Status("network")==0){
Service::Reload("network");
} else Service::Restart("network");
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.17.50/VERSION new/yast2-network-2.17.51/VERSION
--- old/yast2-network-2.17.50/VERSION 2008-10-31 12:19:20.000000000 +0100
+++ new/yast2-network-2.17.51/VERSION 2008-11-05 16:48:55.000000000 +0100
@@ -1 +1 @@
-2.17.50
+2.17.51
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org