Hello community,
here is the log from the commit of package yast2-country
checked in at Fri Sep 26 16:58:16 CEST 2008.
--------
--- yast2-country/yast2-country.changes 2008-09-24 14:43:24.000000000 +0200
+++ /mounts/work_src_done/STABLE/yast2-country/yast2-country.changes 2008-09-26 16:34:12.355776000 +0200
@@ -1,0 +2,6 @@
+Fri Sep 26 16:26:37 CEST 2008 - jsuchome@suse.cz
+
+- added Georgian language support
+- 2.17.13
+
+-------------------------------------------------------------------
Old:
----
yast2-country-2.17.12.tar.bz2
New:
----
yast2-country-2.17.13.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-country.spec ++++++
--- /var/tmp/diff_new_pack.p27307/_old 2008-09-26 16:58:10.000000000 +0200
+++ /var/tmp/diff_new_pack.p27307/_new 2008-09-26 16:58:10.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-country (Version 2.17.12)
+# spec file for package yast2-country (Version 2.17.13)
#
# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
@@ -19,12 +19,12 @@
Name: yast2-country
-Version: 2.17.12
+Version: 2.17.13
Release: 1
License: GPL v2 or later
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-country-2.17.12.tar.bz2
+Source0: yast2-country-2.17.13.tar.bz2
Prefix: /usr
BuildRequires: perl-XML-Writer update-desktop-files yast2 yast2-devtools yast2-perl-bindings yast2-testsuite
Requires: yast2-trans-stats yast2-perl-bindings timezone
@@ -75,7 +75,7 @@
Jiri Suchomel
%prep
-%setup -n yast2-country-2.17.12
+%setup -n yast2-country-2.17.13
%build
%{prefix}/bin/y2tool y2autoconf
@@ -142,8 +142,10 @@
%dir /usr/share/YaST2/data/languages
/usr/share/YaST2/data/languages/*.ycp
/usr/share/YaST2/modules/Language.y*
-
%changelog
+* Fri Sep 26 2008 jsuchome@suse.cz
+- added Georgian language support
+- 2.17.13
* Wed Sep 24 2008 jsuchome@suse.cz
- do not use dumpkeys after the loadkeys call (bnc#116143)
- adapt CONSOLE_SCREENMAP values in consolefonts.ycp (bnc#367801)
++++++ yast2-country-2.17.12.tar.bz2 -> yast2-country-2.17.13.tar.bz2 ++++++
++++ 14655 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.17.12/console/data/consolefonts.ycp new/yast2-country-2.17.13/console/data/consolefonts.ycp
--- old/yast2-country-2.17.12/console/data/consolefonts.ycp 2008-09-24 14:07:49.000000000 +0200
+++ new/yast2-country-2.17.13/console/data/consolefonts.ycp 2008-09-24 14:42:56.000000000 +0200
@@ -1,7 +1,7 @@
/*
* Maintainer: Thomas Fehr
*
- * $Id: consolefonts.ycp 41976 2007-11-12 15:04:23Z jsuchome $
+ * $Id: consolefonts.ycp 51463 2008-09-24 12:43:35Z jsuchome $
*/
$[
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.17.12/keyboard/src/modules/Keyboard.ycp new/yast2-country-2.17.13/keyboard/src/modules/Keyboard.ycp
--- old/yast2-country-2.17.12/keyboard/src/modules/Keyboard.ycp 2008-09-24 14:11:32.000000000 +0200
+++ new/yast2-country-2.17.13/keyboard/src/modules/Keyboard.ycp 2008-09-26 16:22:17.000000000 +0200
@@ -13,7 +13,7 @@
*
* Maintainer: Jiri Suchomel
*
- * $Id: Keyboard.ycp 47548 2008-05-15 08:39:26Z jsuchome $
+ * $Id: Keyboard.ycp 51603 2008-09-26 14:23:04Z jsuchome $
*
* Usage:
* ------
@@ -27,7 +27,7 @@
* XkbLayout
* unique_key
*
- * Set after having called SetLanguage( keyboard ).
+ * Set after having called SetKeyboard( keyboard ).
*
* XkbModel
* XkbVariant
@@ -58,7 +58,7 @@
*
* Restore() - Load module data from /var/lib/YaST2/Keyboard_data.ycp
*
- * SetLanguage() - Set public data to values corresponding to the given language.
+ * SetKeyboard() - Set public data to values corresponding to the given language.
*
* GetKeyboardForLanguage() - Get the keyboard language for a given language code.
*
@@ -229,8 +229,8 @@
* Restore the the non-keyboard values from sysconfig.
*/
-define void GetKbdSysconfig()
- ``{
+define void GetKbdSysconfig() {
+
// Read the the variables not touched by the module to be able to
// store them again on Save().
//
@@ -251,7 +251,7 @@
kbd_rate, kbd_delay, kbd_numlock, kbd_capslock,
kbd_scrlock, kbd_disable_capslock );
y2milestone( "tty:%1", kbd_tty );
- }
+}
/*
* get_reduced_keyboard_db()
@@ -422,7 +422,7 @@
* @see get_xkblayout2keyboard()
*/
-define map get_lang2keyboard() {
+global define map get_lang2keyboard() {
map base_lang2keyboard = (map)SCR::Read(.target.yast2, "lang2keyboard.ycp");
if (base_lang2keyboard == nil) base_lang2keyboard = $[];
@@ -475,18 +475,18 @@
}
/**
- * SetLanguage()
+ * SetKeyboard()
*
- * Set language specific module data to reflect the given language.
+ * Set language specific module data to reflect the given keyboard layout.
*
- * @param Keyboard language e.g. "english-us"
+ * @param Keyboard layout e.g. "english-us"
*
* @return true - Success. Language set in public data.
* false - Error. Language not set.
*
*/
-global define boolean SetLanguage (string keyboard) {
+global define boolean SetKeyboard (string keyboard) {
y2milestone ("Setting keyboard to: <%1>", keyboard );
@@ -569,12 +569,10 @@
}
return true; // OK
-} // SetLanguage()
+} // SetKeyboard()
/**
- * Restore()
- *
* Restore the the data from sysconfig.
*
* @return true - Data could be restored
@@ -612,15 +610,15 @@
{
// Restore module data.
//
- SetLanguage( current_kbd );
- y2milestone("Restored data (sysconfig) for keyboard: <%1>",current_kbd);
+ SetKeyboard( current_kbd );
+ y2milestone("Restored data (sysconfig) for keyboard: <%1>",
+ current_kbd);
}
else
{
// for cloning, to be shown in Summary
name = GetKeyboardName (current_kbd);
}
-
ret = true;
}
}
@@ -760,7 +758,7 @@
// Set the module state.
//
- SetLanguage( default_keyboard );
+ SetKeyboard( default_keyboard );
if (Stage::initial ())
{
@@ -810,22 +808,21 @@
// We have three possible sources of information:
//
- // Newly probed data: - installation initial mode --> probing
- // sysconfig: - installation continue mode or normal mode
- // XF86Config: - restoring from sysconfig failed and running system
+ // probed data: - installation initial mode --> probing
+ // sysconfig: - installation continue mode or normal mode
+ // XF86Config: - restoring from sysconfig failed and running system
//
- y2milestone( "Keyboard::Keyboard init:%1 update:%2", Stage::initial (),
+ y2milestone ("Keyboard::Keyboard init:%1 update:%2", Stage::initial (),
Mode::update () );
boolean success = false;
// If not in initial mode try to restore from sysconfig.
- //
if (!Stage::initial () || Mode::live_installation ())
{
success = Restore();
- // If this failed and we are in a running system try to restore from XF86Config.
- //
+ // If this failed and we are in a running system try to restore from
+ // X11 Config.
if (!success && Mode::normal () && x11_setup_needed ())
{
// Get the current layout from XF86Config and
@@ -836,14 +833,14 @@
y2milestone("keyboard layout YaST2: %1", current_layout );
// Set the keyboard variables to this value if possible.
- //
if ( current_layout != "" )
- {
- SetLanguage( current_layout );
- y2milestone("Restored data (XF86Config) for keyboard: <%1>", current_kbd );
+ {
+ SetKeyboard (current_layout);
+ y2milestone ("Restored data (XF86Config) for keyboard: <%1>",
+ current_kbd);
success = true;
- }
}
+ }
}
else
{
@@ -1092,7 +1089,7 @@
}
else
{
- SetLanguage (keyboard); // (retranslation)
+ SetKeyboard (keyboard);
y2milestone("Setting console keyboard to: <%1>", current_kbd );
y2milestone("loadkeys command: <%1>", ckb_cmd );
@@ -1135,7 +1132,7 @@
}
else if (size (xkb_cmd)>0)
{
- SetLanguage (keyboard); // (retranslation)
+ SetKeyboard (keyboard);
y2milestone ("Setting X11 keyboard to: <%1>", current_kbd );
y2milestone ("Setting X11 keyboard:\n %1", xkb_cmd );
SCR::Execute (.target.bash, xkb_cmd);
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.17.12/language/data/language_ka_GE.ycp new/yast2-country-2.17.13/language/data/language_ka_GE.ycp
--- old/yast2-country-2.17.12/language/data/language_ka_GE.ycp 1970-01-01 01:00:00.000000000 +0100
+++ new/yast2-country-2.17.13/language/data/language_ka_GE.ycp 2008-09-26 16:25:46.000000000 +0200
@@ -0,0 +1,42 @@
+/**
+ * This file contains the description of the language needed by yast2-country
+ * module.
+ *
+ * Translation of the 'language name' to actual YaST language be must applied
+ * each time this file is invoked.
+ *
+ * If you want to add new language to YaST using a file of this type provided
+ * by some module different from yast2-country (e.g. in some Add-On Product),
+ * consider using special textdomain, so it is possible to provide also
+ * translations of the 'language name' string to all installed languages.
+ *
+ * Author: Jiří Suchomel
+ */
+{
+ textdomain "languages_db";
+
+ return
+ $[
+ // 1. information for language selection:
+ // Format is
+ // <LANG-Code> : [
+ // <Language-to-display-UTF8-coded>,
+ // <Language-to-display-ASCII-coded-if-needed>,
+ // <LANG modifier used when UTF-8 enconding is selected>
+ // <LANG modifier used when no UTF-8 enconding is selected>
+ // <translated Language-to-display-UTF8-coded> ]
+ //
+ "ka_GE" : [
+ "ქართული",
+ "Kartuli",
+ ".UTF-8",
+ "",
+ // language name
+ _("Georgian")
+ ],
+ // 2. what time zone propose for this language
+ "timezone" : "Asia/Tbilisi",
+ // 3. which keyboard layout propose for this language
+ "keyboard" : "english-us",
+ ];
+}
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.17.12/language/src/language.ycp new/yast2-country-2.17.13/language/src/language.ycp
--- old/yast2-country-2.17.12/language/src/language.ycp 2008-09-24 14:34:47.000000000 +0200
+++ new/yast2-country-2.17.13/language/src/language.ycp 2008-09-24 14:42:56.000000000 +0200
@@ -7,7 +7,7 @@
*
* Purpose: client for language configuration in running system
*
- * $Id: language.ycp 50708 2008-09-04 20:04:54Z visnov $
+ * $Id: language.ycp 51463 2008-09-24 12:43:35Z jsuchome $
*/
{
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.17.12/VERSION new/yast2-country-2.17.13/VERSION
--- old/yast2-country-2.17.12/VERSION 2008-09-24 14:21:06.000000000 +0200
+++ new/yast2-country-2.17.13/VERSION 2008-09-26 16:27:04.000000000 +0200
@@ -1 +1 @@
-2.17.12
+2.17.13
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org