Hello community,
here is the log from the commit of package yast2-installation
checked in at Wed Nov 28 03:03:57 CET 2007.
--------
--- yast2-installation/yast2-installation.changes 2007-11-23 13:42:52.000000000 +0100
+++ /mounts/work_src_done/NOARCH/yast2-installation/yast2-installation.changes 2007-11-27 19:30:49.910383000 +0100
@@ -1,0 +2,7 @@
+Tue Nov 27 19:14:15 CET 2007 - sh@suse.de
+
+- Use string ID "contents" rather than YCPSymbol `contents
+ for Wizard ReplacePoint
+- V 2.16.5
+
+-------------------------------------------------------------------
Old:
----
yast2-installation-2.16.4.tar.bz2
New:
----
yast2-installation-2.16.5.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-installation.spec ++++++
--- /var/tmp/diff_new_pack.lq9133/_old 2007-11-28 03:03:52.000000000 +0100
+++ /var/tmp/diff_new_pack.lq9133/_new 2007-11-28 03:03:52.000000000 +0100
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-installation (Version 2.16.4)
+# spec file for package yast2-installation (Version 2.16.5)
#
# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
@@ -11,12 +11,12 @@
# norootforbuild
Name: yast2-installation
-Version: 2.16.4
+Version: 2.16.5
Release: 1
License: GPL v2 or later
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-installation-2.16.4.tar.bz2
+Source0: yast2-installation-2.16.5.tar.bz2
Prefix: /usr
BuildRequires: docbook-xsl-stylesheets doxygen libxslt perl-XML-Writer sgml-skel update-desktop-files yast2-core-devel yast2-devtools yast2-testsuite
# Mode::live_installation
@@ -24,7 +24,7 @@
Requires: autoyast2-installation
# Mode::live_installation
# Internet::ShutdownAllLocalDHCPClients
-Requires: yast2 >= 2.16.12
+Requires: yast2 >= 2.16.14
# Required in in the first stage, after
# switching to the installed system, bugzilla #249679
Requires: yast2-bootloader
@@ -70,12 +70,12 @@
Summary: YaST2 - Installation Parts
%package devel-doc
-Version: 2.16.4
+Version: 2.16.5
Release: 1
License: GPL v2 or later
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-installation-2.16.4.tar.bz2
+Source0: yast2-installation-2.16.5.tar.bz2
Prefix: /usr
Requires: yast2-installation >= 2.15.34
PreReq: %fillup_prereq
@@ -108,7 +108,7 @@
Lukas Ocilka
%prep
-%setup -n yast2-installation-2.16.4
+%setup -n yast2-installation-2.16.5
%build
%{prefix}/bin/y2tool y2autoconf
@@ -178,6 +178,10 @@
%exclude %{prefix}/share/doc/packages/yast2-installation/COPYING
%exclude %{prefix}/share/doc/packages/yast2-installation/README
%changelog
+* Tue Nov 27 2007 - sh@suse.de
+- Use string ID "contents" rather than YCPSymbol `contents
+ for Wizard ReplacePoint
+- V 2.16.5
* Fri Nov 23 2007 - locilka@suse.cz
- Using translations for inst_finish steps (#343783).
- 2.16.4
++++++ yast2-installation-2.16.4.tar.bz2 -> yast2-installation-2.16.5.tar.bz2 ++++++
++++ 11395 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-installation-2.16.4/configure.in new/yast2-installation-2.16.5/configure.in
--- old/yast2-installation-2.16.4/configure.in 2007-11-23 13:43:52.000000000 +0100
+++ new/yast2-installation-2.16.5/configure.in 2007-11-22 16:55:04.000000000 +0100
@@ -3,7 +3,7 @@
dnl -- This file is generated by y2autoconf 2.16.2 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-installation, 2.16.4, http://bugs.opensuse.org/, yast2-installation)
+AC_INIT(yast2-installation, 2.16.3, http://bugs.opensuse.org/, yast2-installation)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -18,7 +18,7 @@
AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
dnl Important YaST2 variables
-VERSION="2.16.4"
+VERSION="2.16.3"
RPMNAME="yast2-installation"
MAINTAINER="Lukas Ocilka "
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-installation-2.16.4/control/docs/control-doc.xml new/yast2-installation-2.16.5/control/docs/control-doc.xml
--- old/yast2-installation-2.16.4/control/docs/control-doc.xml 2007-05-18 10:44:02.000000000 +0200
+++ new/yast2-installation-2.16.5/control/docs/control-doc.xml 2007-11-16 12:43:51.000000000 +0100
@@ -28,7 +28,7 @@
0.1
</revnumber>
<date>
- $Date: 2004-10-27 16:25:24 +0200 (Wed, 27 Oct 2004) $
+ $Date: 2004-10-27 16:25:24 +0200 (Mi, 27 Okt 2004) $
</date>
<revremark>Initial Release as PDF</revremark>
</revision>
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-installation-2.16.4/missing new/yast2-installation-2.16.5/missing
--- old/yast2-installation-2.16.4/missing 2007-11-23 13:43:58.000000000 +0100
+++ new/yast2-installation-2.16.5/missing 2007-11-22 16:55:12.000000000 +0100
@@ -1,9 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2006-05-10.23
+scriptversion=2005-06-08.21
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard , 1996.
@@ -33,8 +33,6 @@
fi
run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -46,7 +44,7 @@
msg="missing on your system"
-case $1 in
+case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -79,7 +77,6 @@
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -109,7 +106,7 @@
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
-case $1 in
+case "$1" in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
@@ -138,7 +135,7 @@
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case $1 in
+case "$1" in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -167,7 +164,7 @@
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case $f in
+ case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -195,8 +192,8 @@
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
@@ -217,25 +214,25 @@
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if test ! -f y.tab.h; then
+ if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
- if test ! -f y.tab.c; then
+ if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
@@ -247,18 +244,18 @@
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if test ! -f lex.yy.c; then
+ if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
@@ -270,9 +267,11 @@
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
@@ -290,17 +289,11 @@
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
@@ -324,13 +317,13 @@
fi
firstarg="$1"
if shift; then
- case $firstarg in
+ case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case $firstarg in
+ case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-installation-2.16.4/src/clients/inst_proposal.ycp new/yast2-installation-2.16.5/src/clients/inst_proposal.ycp
--- old/yast2-installation-2.16.4/src/clients/inst_proposal.ycp 2007-06-11 18:00:58.000000000 +0200
+++ new/yast2-installation-2.16.5/src/clients/inst_proposal.ycp 2007-11-27 15:55:39.000000000 +0100
@@ -7,7 +7,7 @@
* Jiri Srain
* Lukas Ocilka
*
- * $Id: inst_proposal.ycp 38388 2007-06-11 16:00:58Z locilka $
+ * $Id: inst_proposal.ycp 42450 2007-11-27 14:55:38Z sh-sh-sh $
*
* Create and display reasonable proposal for basic
* installation and call sub-workflows as required
@@ -812,7 +812,7 @@
}
if ( Stage::stage () == "initial" )
// push button
- Wizard::ShowReleaseNotesButton (_("&Show Release Notes"), `rel_notes);
+ Wizard::ShowReleaseNotesButton (_("&Show Release Notes"), "rel_notes");
}
@@ -1186,7 +1186,7 @@
return `finish;
}
}
- else if (input == `rel_notes)
+ else if (input == "rel_notes")
{
WFM::CallFunction("release_notes_popup", [] );
}
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-installation-2.16.4/VERSION new/yast2-installation-2.16.5/VERSION
--- old/yast2-installation-2.16.4/VERSION 2007-11-23 13:43:06.000000000 +0100
+++ new/yast2-installation-2.16.5/VERSION 2007-11-27 19:15:04.000000000 +0100
@@ -1 +1 @@
-2.16.4
+2.16.5
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org