Hello community,
here is the log from the commit of package yast2-network
checked in at Mon Apr 16 12:11:27 CEST 2007.
--------
--- yast2-network/yast2-network.changes 2007-04-13 09:32:17.000000000 +0200
+++ /mounts/work_src_done/STABLE/yast2-network/yast2-network.changes 2007-04-16 10:24:37.000000000 +0200
@@ -1,0 +2,14 @@
+Mon Apr 16 10:31:02 CEST 2007 - mzugec@suse.cz
+
+- /etc/hosts shows incorrect ip address for partition installed via network (#263035)
+- 2.15.27
+
+-------------------------------------------------------------------
+Fri Apr 13 11:36:07 CEST 2007 - kmachalkova@suse.cz
+
+- Correct handling of network interface firewall zone, including
+ ommited help text (#257479)
+- Helptexts adjusted to reflect UI changes (FaTE #120077)
+- BOOTPROTO_*autoip dropped
+
+-------------------------------------------------------------------
Old:
----
yast2-network-2.15.26.tar.bz2
New:
----
yast2-network-2.15.27.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-network.spec ++++++
--- /var/tmp/diff_new_pack.r26179/_old 2007-04-16 12:11:21.000000000 +0200
+++ /var/tmp/diff_new_pack.r26179/_new 2007-04-16 12:11:21.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-network (Version 2.15.26)
+# spec file for package yast2-network (Version 2.15.27)
#
# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
@@ -11,12 +11,12 @@
# norootforbuild
Name: yast2-network
-Version: 2.15.26
+Version: 2.15.27
Release: 1
License: GNU General Public License (GPL)
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-network-2.15.26.tar.bz2
+Source0: yast2-network-2.15.27.tar.bz2
prefix: /usr
# should be required by devtools
BuildRequires: perl-XML-Writer pkgconfig
@@ -51,7 +51,7 @@
Michal Svec
%prep
-%setup -n yast2-network-2.15.26
+%setup -n yast2-network-2.15.27
%build
%{prefix}/bin/y2tool y2autoconf
@@ -107,6 +107,14 @@
/usr/share/YaST2/schema/autoyast/rnc/proxy.rnc
%changelog
+* Mon Apr 16 2007 - mzugec@suse.cz
+- /etc/hosts shows incorrect ip address for partition installed via network (#263035)
+- 2.15.27
+* Fri Apr 13 2007 - kmachalkova@suse.cz
+- Correct handling of network interface firewall zone, including
+ ommited help text (#257479)
+- Helptexts adjusted to reflect UI changes (FaTE #120077)
+- BOOTPROTO_*autoip dropped
* Thu Apr 12 2007 - mzugec@suse.cz
- when NetworkManager enabled, install KNetworkManager/GnomeNetworkManager applet(#260532)
- during installation propose first connected interface (#256606)
++++++ yast2-network-2.15.26.tar.bz2 -> yast2-network-2.15.27.tar.bz2 ++++++
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.15.26/configure new/yast2-network-2.15.27/configure
--- old/yast2-network-2.15.26/configure 2007-04-12 15:59:42.000000000 +0200
+++ new/yast2-network-2.15.27/configure 2007-04-16 10:30:08.000000000 +0200
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.60 for yast2-network 2.15.25.
+# Generated by GNU Autoconf 2.60 for yast2-network 2.15.26.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -559,8 +559,8 @@
# Identity of this package.
PACKAGE_NAME='yast2-network'
PACKAGE_TARNAME='yast2-network'
-PACKAGE_VERSION='2.15.25'
-PACKAGE_STRING='yast2-network 2.15.25'
+PACKAGE_VERSION='2.15.26'
+PACKAGE_STRING='yast2-network 2.15.26'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -1181,7 +1181,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures yast2-network 2.15.25 to adapt to many kinds of systems.
+\`configure' configures yast2-network 2.15.26 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1252,7 +1252,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of yast2-network 2.15.25:";;
+ short | recursive ) echo "Configuration of yast2-network 2.15.26:";;
esac
cat <<\_ACEOF
@@ -1330,7 +1330,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-yast2-network configure 2.15.25
+yast2-network configure 2.15.26
generated by GNU Autoconf 2.60
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1344,7 +1344,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by yast2-network $as_me 2.15.25, which was
+It was created by yast2-network $as_me 2.15.26, which was
generated by GNU Autoconf 2.60. Invocation command line was
$ $0 $@
@@ -2145,7 +2145,7 @@
# Define the identity of the package.
PACKAGE='yast2-network'
- VERSION='2.15.25'
+ VERSION='2.15.26'
cat >>confdefs.h <<_ACEOF
@@ -2372,7 +2372,7 @@
-VERSION="2.15.25"
+VERSION="2.15.26"
RPMNAME="yast2-network"
MAINTAINER="Michal Zugec "
@@ -3258,7 +3258,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by yast2-network $as_me 2.15.25, which was
+This file was extended by yast2-network $as_me 2.15.26, which was
generated by GNU Autoconf 2.60. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -3301,7 +3301,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-yast2-network config.status 2.15.25
+yast2-network config.status 2.15.26
configured by $0, generated by GNU Autoconf 2.60,
with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.15.26/configure.in new/yast2-network-2.15.27/configure.in
--- old/yast2-network-2.15.26/configure.in 2007-04-12 15:59:38.000000000 +0200
+++ new/yast2-network-2.15.27/configure.in 2007-04-16 10:30:03.000000000 +0200
@@ -3,7 +3,7 @@
dnl -- This file is generated by y2autoconf 2.14.0 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-network, 2.15.25, http://bugs.opensuse.org/, yast2-network)
+AC_INIT(yast2-network, 2.15.26, http://bugs.opensuse.org/, yast2-network)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -17,7 +17,7 @@
AM_INIT_AUTOMAKE(tar-ustar) dnl searches for some needed programs
dnl Important YaST2 variables
-VERSION="2.15.25"
+VERSION="2.15.26"
RPMNAME="yast2-network"
MAINTAINER="Michal Zugec "
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.15.26/src/clients/general_proposal.ycp new/yast2-network-2.15.27/src/clients/general_proposal.ycp
--- old/yast2-network-2.15.26/src/clients/general_proposal.ycp 2007-04-04 14:29:40.000000000 +0200
+++ new/yast2-network-2.15.27/src/clients/general_proposal.ycp 2007-04-16 09:20:57.000000000 +0200
@@ -1,10 +1,10 @@
/**
- * File: clients/networkmanager_proposal.ycp
+ * File: clients/general_proposal.ycp
* Package: Network configuration
- * Summary: Network mode proposal
+ * Summary: Network mode + ipv6 proposal
* Authors: Martin Vidner
*
- * $Id: general_proposal.ycp 37281 2007-04-03 11:30:04Z kmachalkova $
+ * $Id: general_proposal.ycp 37439 2007-04-13 09:30:05Z kmachalkova $
*
* This is not a standalone proposal, it depends on lan_proposal. It
* must run after it.
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.15.26/src/lan/address.ycp new/yast2-network-2.15.27/src/lan/address.ycp
--- old/yast2-network-2.15.26/src/lan/address.ycp 2007-04-12 15:59:09.000000000 +0200
+++ new/yast2-network-2.15.27/src/lan/address.ycp 2007-04-16 09:20:57.000000000 +0200
@@ -4,7 +4,7 @@
* Summary: Network card adresss configuration dialogs
* Authors: Michal Svec
*
- * $Id: address.ycp 37397 2007-04-11 13:04:38Z kmachalkova $
+ * $Id: address.ycp 37440 2007-04-13 09:30:49Z kmachalkova $
*/
{
@@ -359,7 +359,7 @@
"_DIALOG": $[
"widget": `empty,
"help":
- /* Address dialog help 5/8 */
+ /* Address dialog help 7/8 */
_("<p>Clicking <b>Next</b> completes the configuration.</p>") +
/* Address dialog help 8/8 */
_("<p>Contact your <b>network administrator</b> for more information about
@@ -474,10 +474,11 @@
"BOOTPROTO_none": $[
"widget": `radio_button,
// radio button label
- "label": _("None Address Setup"),
+ "label": _("No Address Setup"),
"opt": [`notify],
"init": CWM::InitNull,
- "store": CWM::StoreNull
+ "store": CWM::StoreNull,
+ "help": help["bootproto_none"]:"",
],
"BOOTPROTO_dhcp": $[
@@ -499,25 +500,23 @@
"store": CWM::StoreNull,
],
- "BOOTPROTO_dhcp+autoip": $[
+/* "BOOTPROTO_dhcp+autoip": $[
"widget": `radio_button,
- /* Radio button label */
"label": _("A&utomatic Address Setup (via DHCP+AUTOIP)"),
"opt": [`notify],
"help": ("FIXME, help BOOTPROTO_dhcp_autoip<br>"),
"init": CWM::InitNull,
"store": CWM::StoreNull,
],
-
"BOOTPROTO_autoip": $[
"widget": `radio_button,
- /* Radio button label */
"label": _("A&utomatic Address Setup (via AUTOIP)"),
"opt": [`notify],
"help": ("FIXME, help BOOTPROTO_autoip<br>"),
"init": CWM::InitNull,
"store": CWM::StoreNull,
],
+*/
"BOOTPROTO_noaddr": $[
"widget": `radio_button,
/* Radio button label */
@@ -702,7 +701,7 @@
`VSpacing(0.4),
`Frame(_("Device Control"), `HBox(("USERCONTROL"), `HStretch())) ,
`VSpacing (0.4),
- `Frame(_("Maximum Transfer Rate (MTU)"), `HBox(("MTU"), `HStretch()))
+ `Frame(_("Maximum Transfer Unit (MTU)"), `HBox(("MTU"), `HStretch()))
// Frame label
// (`HWeight(1, "BINDTOHW")),
// `VSpacing(0.4),
@@ -843,10 +842,8 @@
`id ("BOOTPROTO"), // CWM must not expand `id
`MarginBox (1, 0,
`VBox (
- `Left ("BOOTPROTO_none"),
`Left ("BOOTPROTO_dhcp"), // TODO: widget attribute align: left
- `Left ("BOOTPROTO_autoip"),
- `Left ("BOOTPROTO_dhcp+autoip"),
+ `Left ("BOOTPROTO_none"),
`Left ("BOOTPROTO_static"),
address_static_contents)
)
@@ -961,7 +958,7 @@
"widget_descr": wd,
"contents": contents2,
/* Address dialog caption */
- "caption": _("Network Address Setup"),
+ "caption": _("Network Card Setup"),
"back_button" : Label::BackButton (),
"next_button" : Label::NextButton (),
"fallback_functions" : functions,
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.15.26/src/lan/help.ycp new/yast2-network-2.15.27/src/lan/help.ycp
--- old/yast2-network-2.15.26/src/lan/help.ycp 2007-04-12 15:59:09.000000000 +0200
+++ new/yast2-network-2.15.27/src/lan/help.ycp 2007-04-16 09:20:57.000000000 +0200
@@ -129,33 +129,36 @@
</ol> "),
"bootproto_dhcp":
- /* Address dialog help 2-6/8: dynamic address preferred */
- /* Address dialog help 2/8 */
- _("<p>You can select none address setup if you don't want any IP address.</p>") +
+ /* Address dialog help 1-6/8: dynamic address preferred */
+ /* Address dialog help 1/8 */
_("<p><b><big>Address Setup</big></b></p>
<p>You can select dynamic address assignment
if you have a <b>DHCP server</b> running on your local network.</p>
") +
- /* Address dialog help 3/8 */
+ /* Address dialog help 2/8 */
_("<p>Also select this if you do not have a static IP address assigned
by the system administrator or your cable or DSL provider.</p>") +
- /* Address dialog help 4/8 */
+ /* Address dialog help 3/8 */
_("<p>Network addresses are then obtained
<b>automatically</b> from the server.</p>
") +
- /* Address dialog help 6/8 */
- _("<p>Otherwise, network addresses must be assigned <b>manually</b>.</p>"),
+ /* Address dialog help 4/8 */
+ _("<p>Otherwise, network addresses must be assigned <b>manually</b>.</p>"),
+
+ /* Address dialog help 5/8 */
+"bootproto_none":
+ _("<p>You can select <b>No Address Setup</b> if you don't want any IP address.</p>"),
"remoteip":
-_("<p>Enter the <b>IP Address</b> (e.g., 192.168.100.99)
+_("<p>Enter <b>IP Address</b> (e.g., 192.168.100.99)
for your computer and the <b>Remote IP Address</b> (e.g., 192.168.100.254)
of your peer.</p>"),
+ /* Address dialog help 6/8 */
"netmask":
- _("<p>Enter the IP address (e.g., 192.168.100.99) for your computer,
-the network mask (usually 255.255.255.0), and, optionally, the default gateway
-IP address.</p>"),
+ _("<p>For <b>Static Address Setup</b> enter static IP address (e.g., 192.168.100.99)
+for your computer and the network mask (usually 255.255.255.0)</p>"),
"fwzone":
_("<p><b><big>Firewall Zone</big></b></p>
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.15.26/src/modules/DNS.ycp new/yast2-network-2.15.27/src/modules/DNS.ycp
--- old/yast2-network-2.15.26/src/modules/DNS.ycp 2007-04-05 09:59:27.000000000 +0200
+++ new/yast2-network-2.15.27/src/modules/DNS.ycp 2007-04-16 10:31:58.000000000 +0200
@@ -4,7 +4,7 @@
* Summary: Hostname and DNS data
* Authors: Michal Svec
*
- * $Id: DNS.ycp 37319 2007-04-05 07:56:12Z mzugec $
+ * $Id: DNS.ycp 37476 2007-04-16 08:28:28Z mzugec $
*
* Manages resolv.conf and (fully qualified) hostname, also
* respecting DHCP.
@@ -207,7 +207,7 @@
/* build FQ hostname */
string fqhostname = Hostname::MergeFQ(hostname, domain);
-// FIXME whrere was NetworkDevices::Read called?
+ NetworkDevices::Read();
/* Update /etc/hosts */
// Take static network addresses.
// Watch out, there may be an unused IPADDR for a DHCP interface, #49055
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-network-2.15.26/VERSION new/yast2-network-2.15.27/VERSION
--- old/yast2-network-2.15.26/VERSION 2007-04-12 16:00:09.000000000 +0200
+++ new/yast2-network-2.15.27/VERSION 2007-04-16 10:31:01.000000000 +0200
@@ -1 +1 @@
-2.15.26
+2.15.27
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org