Hello community,
here is the log from the commit of package hplip
checked in at Tue Mar 27 01:32:06 CEST 2007.
--------
--- hplip/hpijs-standalone.changes 2007-03-01 13:35:41.000000000 +0100
+++ /mounts/work_src_done/STABLE/hplip/hpijs-standalone.changes 2007-03-26 09:00:37.000000000 +0200
@@ -1,0 +2,7 @@
+Mon Mar 26 09:00:01 CEST 2007 - jsmeix@suse.de
+
+- Updated to version 1.7.3:
+ Many bug fixes (no Suse bugs).
+ No new supported models but enhancements for some models.
+
+-------------------------------------------------------------------
--- hplip/hplip.changes 2007-03-01 13:35:09.000000000 +0100
+++ /mounts/work_src_done/STABLE/hplip/hplip.changes 2007-03-26 08:59:24.000000000 +0200
@@ -1,0 +2,8 @@
+Mon Mar 26 08:53:51 CEST 2007 - jsmeix@suse.de
+
+- Updated to version 1.7.3:
+ Many bug fixes (no Suse bugs).
+ No new supported models but enhancements for some models.
+ For details see release_notes.html
+
+-------------------------------------------------------------------
Old:
----
hplip-1.7.2.tar.bz2
New:
----
hplip-1.7.3.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ hpijs-standalone.spec ++++++
--- /var/tmp/diff_new_pack.w20921/_old 2007-03-27 01:31:55.000000000 +0200
+++ /var/tmp/diff_new_pack.w20921/_new 2007-03-27 01:31:55.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package hpijs-standalone (Version 1.7.2)
+# spec file for package hpijs-standalone (Version 1.7.3)
#
# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
@@ -16,13 +16,12 @@
# HPLIP has reached 1.0 status. With this release a date encoded revision number is used:
# x.y.m : x = major release number, y = year (eg: 6 = 2006), m = month (eg: 6a = second release in June)
# Official releases have a 3 digit number and release candidates have a 4 digit number: x.y.m.rc
-Version: 1.7.2
+Version: 1.7.3
Release: 1
Group: Hardware/Printing
License: BSD License and BSD-like
URL: http://hpinkjet.sourceforge.net/
# Source0...Source9 is for sources from HP:
-# URL for Source0: http://superb-west.dl.sourceforge.net/sourceforge/hplip/hplip-1.7.2.tar.gz
Source0: hplip-%{version}.tar.bz2
# Patch0...Patch9 is for patches from HP:
# Patch10...Patch99 is for Suse patches for the sources from HP:
@@ -70,7 +69,7 @@
%prep
# Be quiet when unpacking:
-%setup -q -n hplip-1.7.2
+%setup -q -n hplip-%{version}
%build
# If AUTOMAKE='automake --foreign' is not set, autoreconf (in fact automake)
@@ -93,19 +92,29 @@
# To avoid that too much is built (e.g. the full documentation from higher directories)
# the specific make target "make hpijs" is called.
# Regarding the configure options see tech_docs/tarball_install.html (not very explanatory):
-# --disable-rpm-install disables sane, icon, /etc/hp and /etc/init.d install (default = disabled)
-# --disable-foomatic-install disables foomatic install (HPIJS option, default = enabled)
-# --disable-cups-install disables cups install (HPIJS option, default = enabled)
+# --disable-rpm-install disables sane, icon, /etc/hp and /etc/init.d install (default=disabled)
+# --disable-foomatic-install disables foomatic install (HPIJS option, default=enabled)
+# --disable-cups-install disables cups install (HPIJS option, default=enabled)
# CUPS install would do:
# (1) remove any old HP HPIJS PPD files from the CUPS PPD directory
# (2) symlink the HP HPIJS PPD files to the CUPS PPD directory
# (3) symlink foomatic-rip to the CUPS filter directory.
-# --disable-network-build disables network support, will not link with libsnmp (default = enabled)
-# --disable-pp-build disables parallel port support (default = enabled)
+# --disable-network-build disables network support, will not link with libsnmp (default=enabled)
+# --disable-pp-build disables parallel port support (default=enabled)
# --enable-scan-build enable scanner build (default=yes)
# --enable-gui-build enable gui build (default=yes)
# --enable-fax-build enable fax build (default=yes)
+# --disable-cups11-build disable CUPS 1.1 hp/hpfax device discovery message (default=disabled)
+# --enable-cups11-build results a "no_device_found" message
+# --disable-cups11-build results depend on the following conditions:
+# Condition 1 (no HPLIP daemons):
+# output nothing on stdout, exit 1
+# Condition 2 (no HP device found):
+# direct hp "Unknown" "HP Printer (HPLIP)", exit 0
+# Condition 3 (HP device found):
+# direct hp:/... "HP model" "HP model (HPLIP)" "DeviceID", exit 0
# rpm-install is no longer needed because "make install DESTDIR=/tmp/myhplip" works correctly now.
+# disable-cups-install avoids useless stuff when building a RPM.
pushd prnt/hpijs
./configure --prefix=/usr --libdir=%_libdir --disable-hplip-build --disable-cups-install --disable-foomatic-install
make hpijs
@@ -130,6 +139,10 @@
%{_bindir}/hpijs
%changelog
+* Mon Mar 26 2007 - jsmeix@suse.de
+- Updated to version 1.7.3:
+ Many bug fixes (no Suse bugs).
+ No new supported models but enhancements for some models.
* Thu Mar 01 2007 - jsmeix@suse.de
- Updated to version 1.7.2:
Several more supported Officejet Pro devices.
++++++ hplip.spec ++++++
--- /var/tmp/diff_new_pack.w20921/_old 2007-03-27 01:31:55.000000000 +0200
+++ /var/tmp/diff_new_pack.w20921/_new 2007-03-27 01:31:55.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package hplip (Version 1.7.2)
+# spec file for package hplip (Version 1.7.3)
#
# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
@@ -16,14 +16,13 @@
# HPLIP has reached 1.0 status. With this release a date encoded revision number is used:
# x.y.m : x = major release number, y = year (eg: 6 = 2006), m = month (eg: 6a = second release in June)
# Official releases have a 3 digit number and release candidates have a 4 digit number: x.y.m.rc
-Version: 1.7.2
+Version: 1.7.3
Release: 1
-%define hpijsVersion 2.7.1
+%define hpijsVersion 2.7.3
Group: Hardware/Printing
License: BSD License and BSD-like, GNU General Public License (GPL)
URL: http://hpinkjet.sourceforge.net/
# Source0...Source9 is for sources from HP:
-# URL for Source0: http://superb-west.dl.sourceforge.net/sourceforge/hplip/hplip-1.7.2.tar.gz
Source0: %{name}-%{version}.tar.bz2
# Patch0...Patch9 is for patches from HP:
# Patch10...Patch99 is for Suse patches for the sources from HP:
@@ -97,7 +96,7 @@
Cauligi Raghothama S.