Mailinglist Archive: opensuse-buildservice (105 mails)

< Previous Next >
[opensuse-buildservice] Fedora 31 and Raspbian 10 armv7l builds fail

Both these fail with similar messages:-

[ 32s] ### VM INTERACTION END ###
[ 32s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl) [ 32s] or the build host has a
kernel or hardware problem...

gave up after 9 failed build attempts...

The full log files are attached.

Thanks
[ 0s] Using BUILD_ROOT=/var/cache/obs/worker/root_1/.mount
[ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel
[ 0s] Doing kvm build in /var/cache/obs/worker/root_1/root
[ 0s]
[ 1s]
[ 1s] cloud103 started "build acmbuild.spec" at Sun Dec 1 11:17:47 UTC 2019.
[ 1s]
[ 1s] Building acmbuild for project 'home:m-grant-prg' repository
'Fedora_31' arch 'armv7l' srcmd5 'd99ec3b876266900e65c1bd4c0ef1ab4'
[ 1s]
[ 1s] processing recipe
/var/cache/obs/worker/root_1/.build-srcdir/acmbuild.spec ...
[ 1s] running changelog2spec --target rpm --file
/var/cache/obs/worker/root_1/.build-srcdir/acmbuild.spec
[ 1s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs
--cachedir /var/cache/build --prepare --clean --rpmlist
/var/cache/obs/worker/root_1/.build.rpmlist
/var/cache/obs/worker/root_1/.build-srcdir/acmbuild.spec build ...
[ 2s] cycle: filesystem -> bash
[ 2s] breaking dependency bash -> filesystem
[ 2s] cycle: libgcc -> filesystem -> bash -> glibc
[ 2s] breaking dependency bash -> glibc
[ 2s] cycle: libgcc -> filesystem -> bash
[ 2s] breaking dependency filesystem -> bash
[ 2s] cycle: filesystem -> setup
[ 2s] breaking dependency filesystem -> setup
[ 2s] cycle: perl-Carp -> perl-libs
[ 2s] breaking dependency perl-libs -> perl-Carp
[ 2s] cycle: perl-libs -> perl-Exporter
[ 2s] breaking dependency perl-libs -> perl-Exporter
[ 2s] cycle: perl-Carp -> perl-Exporter
[ 2s] breaking dependency perl-Exporter -> perl-Carp
[ 2s] cycle: perl-constant -> perl-interpreter
[ 2s] breaking dependency perl-interpreter -> perl-constant
[ 2s] cycle: rpm-libs -> rpm
[ 2s] breaking dependency rpm-libs -> rpm
[ 2s] [1/68] preinstalling filesystem...
[ 2s] [2/68] preinstalling libgcc...
[ 2s] [3/68] preinstalling setup...
[ 3s] [4/68] preinstalling glibc...
[ 3s] [5/68] preinstalling alternatives...
[ 3s] [6/68] preinstalling bzip2-libs...
[ 3s] [7/68] preinstalling diffutils...
[ 3s] [8/68] preinstalling e2fsprogs-libs...
[ 3s] [9/68] preinstalling expat...
[ 3s] [10/68] preinstalling libattr...
[ 3s] [11/68] preinstalling libcap...
[ 3s] [12/68] preinstalling libcap-ng...
[ 3s] [13/68] preinstalling libdb...
[ 3s] [14/68] preinstalling libstdc++...
[ 3s] [15/68] preinstalling libxcrypt...
[ 4s] [16/68] preinstalling libzstd...
[ 4s] [17/68] preinstalling lua-libs...
[ 4s] [18/68] preinstalling m4...
[ 4s] [19/68] preinstalling ncurses-libs...
[ 4s] [20/68] preinstalling nspr...
[ 4s] [21/68] preinstalling pcre...
[ 4s] [22/68] preinstalling pcre2...
[ 4s] [23/68] preinstalling popt...
[ 4s] [24/68] preinstalling xz-libs...
[ 4s] [25/68] preinstalling zlib...
[ 4s] [26/68] preinstalling audit-libs...
[ 4s] [27/68] preinstalling elfutils-libelf...
[ 4s] [28/68] preinstalling file-libs...
[ 4s] [29/68] preinstalling libacl...
[ 5s] [30/68] preinstalling ncurses...
[ 5s] [31/68] preinstalling nss-util...
[ 5s] [32/68] preinstalling openssl-libs...
[ 5s] [33/68] preinstalling readline...
[ 5s] [34/68] preinstalling sqlite-libs...
[ 5s] [35/68] preinstalling attr...
[ 5s] [36/68] preinstalling bash...
[ 5s] [37/68] preinstalling perl-libs...
[ 5s] [38/68] preinstalling qemu-user-static...
[ 6s] [39/68] preinstalling perl-Exporter...
[ 6s] [40/68] preinstalling libsepol...
[ 6s] [41/68] preinstalling acl...
[ 6s] [42/68] preinstalling bzip2...
[ 6s] [43/68] preinstalling grep...
[ 6s] [44/68] preinstalling info...
[ 6s] [45/68] preinstalling nss-softokn-freebl...
[ 6s] [46/68] preinstalling sqlite...
[ 6s] [47/68] preinstalling rpm-libs...
[ 6s] [48/68] preinstalling perl-Carp...
[ 6s] [49/68] preinstalling libselinux...
[ 7s] [50/68] preinstalling rpm-sign...
[ 7s] [51/68] preinstalling nss-softokn...
[ 7s] [52/68] preinstalling findutils...
[ 7s] [53/68] preinstalling device-mapper-libs...
[ 7s] [54/68] preinstalling sed...
[ 7s] [55/68] preinstalling tar...
[ 7s] [56/68] preinstalling nss...
[ 7s] [57/68] preinstalling perl-interpreter...
[ 7s] [58/68] preinstalling pam...
[ 7s] [59/68] preinstalling coreutils...
[ 7s] [60/68] preinstalling shadow-utils...
[ 8s] [61/68] preinstalling perl-constant...
[ 8s] [62/68] preinstalling openssl...
[ 8s] [63/68] preinstalling perl-Digest-MD5...
[ 8s] [64/68] preinstalling rpm...
[ 8s] [65/68] preinstalling krb5-libs...
[ 8s] [66/68] preinstalling util-linux...
[ 8s] [67/68] preinstalling perl-Getopt-Long...
[ 8s] [68/68] preinstalling perl-Data-Dumper...
[ 8s]
[ 8s] [1/5] preinstalling device-mapper...
[ 9s] [2/5] preinstalling libsmartcols...
[ 9s] [3/5] preinstalling libuuid...
[ 9s] [4/5] preinstalling libblkid...
[ 9s] [5/5] preinstalling libmount...
[ 9s] copying packages...
[ 12s] reordering...cycle: bash -> filesystem
[ 12s] breaking dependency bash -> filesystem
[ 12s] cycle: bash -> glibc -> basesystem -> filesystem
[ 12s] breaking dependency glibc -> basesystem
[ 12s] cycle: bash -> glibc -> glibc-common
[ 12s] breaking dependency glibc-common -> bash
[ 12s] cycle: glibc -> glibc-common
[ 12s] breaking dependency glibc -> glibc-common
[ 12s] cycle: bash -> glibc -> libgcc -> filesystem
[ 12s] breaking dependency bash -> glibc
[ 12s] cycle: bash -> libgcc -> filesystem
[ 12s] breaking dependency filesystem -> bash
[ 12s] cycle: generic-release -> generic-release-common
[ 12s] breaking dependency generic-release-common -> generic-release
[ 12s] cycle: filesystem -> setup
[ 12s] breaking dependency filesystem -> setup
[ 12s] cycle: coreutils -> openssl-libs -> ca-certificates
[ 12s] breaking dependency coreutils -> openssl-libs
[ 12s] cycle: dbus -> dbus-broker -> systemd
[ 12s] breaking dependency systemd -> dbus
[ 12s] cycle: openssl-libs -> crypto-policies -> python3 -> python3-libs
[ 12s] breaking dependency python3-libs -> openssl-libs
[ 12s] cycle: crypto-policies -> python3 -> python3-libs -> libnsl2 ->
libtirpc -> krb5-libs
[ 12s] breaking dependency python3-libs -> libnsl2
[ 12s] cycle: crypto-policies -> python3 -> python3-libs -> libtirpc ->
krb5-libs
[ 12s] breaking dependency python3-libs -> libtirpc
[ 12s] cycle: device-mapper-libs -> device-mapper
[ 12s] breaking dependency device-mapper-libs -> device-mapper
[ 12s] cycle: pam -> libpwquality
[ 12s] breaking dependency pam -> libpwquality
[ 12s] cycle: systemd -> systemd-pam
[ 12s] breaking dependency systemd -> systemd-pam
[ 12s] cycle: rpm -> rpm-libs
[ 12s] breaking dependency rpm-libs -> rpm
[ 12s] cycle: go-srpm-macros -> redhat-rpm-config
[ 12s] breaking dependency redhat-rpm-config -> go-srpm-macros
[ 12s] cycle: redhat-rpm-config -> python-srpm-macros
[ 12s] breaking dependency redhat-rpm-config -> python-srpm-macros
[ 12s] cycle: perl-libs -> perl-Carp
[ 12s] breaking dependency perl-libs -> perl-Carp
[ 12s] cycle: perl-libs -> perl-Exporter
[ 12s] breaking dependency perl-libs -> perl-Exporter
[ 12s] cycle: perl-Carp -> perl-Exporter
[ 12s] breaking dependency perl-Exporter -> perl-Carp
[ 12s] cycle: perl-interpreter -> perl-PathTools -> perl-Errno
[ 12s] breaking dependency perl-interpreter -> perl-PathTools
[ 12s] cycle: perl-interpreter -> perl-File-Path -> perl-PathTools ->
perl-Errno
[ 12s] breaking dependency perl-interpreter -> perl-File-Path
[ 12s] cycle: perl-interpreter -> perl-IO -> perl-Errno
[ 12s] breaking dependency perl-interpreter -> perl-IO
[ 12s] cycle: perl-interpreter -> perl-Text-Tabs+Wrap
[ 12s] breaking dependency perl-interpreter -> perl-Text-Tabs+Wrap
[ 12s] cycle: perl-interpreter -> perl-constant
[ 12s] breaking dependency perl-interpreter -> perl-constant
[ 12s] cycle: perl-interpreter -> perl-threads
[ 12s] breaking dependency perl-interpreter -> perl-threads
[ 12s] cycle: perl-interpreter -> perl-threads-shared
[ 12s] breaking dependency perl-interpreter -> perl-threads-shared
[ 12s] cycle: perl-interpreter -> perl-macros
[ 12s] breaking dependency perl-interpreter -> perl-macros
[ 12s] cycle: glibc-devel -> libxcrypt-devel
[ 12s] breaking dependency libxcrypt-devel -> glibc-devel
[ 12s] cycle: binutils-gold -> binutils
[ 12s] breaking dependency binutils -> binutils-gold
[ 12s] cycle: perl-Getopt-Long -> perl-Pod-Usage
[ 12s] breaking dependency perl-Pod-Usage -> perl-Getopt-Long
[ 12s] cycle: perl-Encode -> perl-Getopt-Long -> perl-Pod-Usage ->
perl-podlators
[ 12s] breaking dependency perl-podlators -> perl-Encode
[ 12s] cycle: perl-Getopt-Long -> perl-Pod-Usage -> perl-podlators
[ 12s] breaking dependency perl-podlators -> perl-Getopt-Long
[ 12s] cycle: perl-Encode -> perl-Getopt-Long -> perl-Pod-Usage ->
perl-podlators -> perl-Pod-Simple
[ 12s] breaking dependency perl-Encode -> perl-Getopt-Long
[ 12s] cycle: perl-ExtUtils-Install -> perl-ExtUtils-MakeMaker
[ 12s] breaking dependency perl-ExtUtils-MakeMaker -> perl-ExtUtils-Install
[ 12s] cycle: perl-Getopt-Long -> perl-Pod-Usage -> perl-podlators ->
perl-Pod-Simple
[ 12s] breaking dependency perl-podlators -> perl-Pod-Simple
[ 12s] cycle: perl-Pod-Usage -> perl-podlators
[ 12s] breaking dependency perl-podlators -> perl-Pod-Usage
[ 12s] cycle: perl-Getopt-Long -> perl-Pod-Usage -> perl-Pod-Perldoc ->
perl-Pod-Simple
[ 12s] breaking dependency perl-Pod-Perldoc -> perl-Pod-Simple
[ 12s] cycle: nss-sysinit -> nss
[ 12s] breaking dependency nss -> nss-sysinit
[ 12s] done
[ 12s] objdump: /boot/vmlinuz: warning: ignoring section flag
IMAGE_SCN_MEM_NOT_PAGED in section .bss
[ 26s] booting kvm...
[ 26s] ### VM INTERACTION START ###
[ 26s] /usr/bin/qemu-kvm -nodefaults -no-reboot -nographic -vga none -cpu
host -object rng-random,filename=/dev/random,id=rng0 -device
virtio-rng-pci,rng=rng0 -runas qemu -net none -kernel /boot/vmlinuz -initrd
/boot/initrd -append root=/dev/sda rootfstype=ext3
rootflags=data=writeback,nobarrier,commit=150,noatime ext4.allow_unsupported=1
kpti=off pti=off spectre_v2=off panic=1 quiet no-kvmclock elevator=noop
nmi_watchdog=0 rw rd.driver.pre=binfmt_misc console=ttyS0
init=/.build/initvm.x86_64 -m 3000 -drive
file=/var/cache/obs/worker/root_1/root,format=raw,if=none,id=disk,cache=unsafe
-device ide-hd,drive=disk,serial=0 -drive
file=/var/cache/obs/worker/root_1/swap,format=raw,if=none,id=swap,cache=unsafe
-device ide-hd,drive=swap,serial=1 -serial stdio -chardev
socket,id=monitor,server,nowait,path=/var/cache/obs/worker/root_1/root.qemu/monitor
-mon chardev=monitor,mode=readline -smp 4
[ 27s] c[?7lSeaBIOS (version
rel-1.12.0-0-ga698c89-rebuilt.opensuse.org)
[ 31s] Booting from ROM..c[?7lNo such file or directory
[ 31s] [ 3.765674] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000100
[ 31s] [ 3.765674]
[ 31s] [ 3.769311] CPU: 2 PID: 1 Comm: initvm.x86_64 Not tainted
4.12.14-lp151.28.32-default #1 openSUSE Leap 15.1
[ 31s] [ 3.773159] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.12.0-0-ga698c89-rebuilt.opensuse.org 04/01/2014
[ 31s] [ 3.777222] Call Trace:
[ 31s] [ 3.778065] dump_stack+0x5c/0x86
[ 31s] [ 3.779178] panic+0xd5/0x233
[ 31s] [ 3.780189] ? perf_event_exit_task+0xc9/0x360
[ 31s] [ 3.781655] do_exit+0xb8a/0xb90
[ 31s] [ 3.782736] ? __do_page_fault+0x256/0x4c0
[ 31s] [ 3.784094] do_group_exit+0x3a/0xb0
[ 31s] [ 3.785281] SyS_exit_group+0x10/0x20
[ 31s] [ 3.786496] do_syscall_64+0x7b/0x160
[ 31s] [ 3.787728] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 31s] [ 3.789399] RIP: 0033:0x438458
[ 31s] [ 3.790426] RSP: 002b:00007ffce8fc3e58 EFLAGS: 00000246 ORIG_RAX:
00000000000000e7
[ 31s] [ 3.792897] RAX: ffffffffffffffda RBX: 0000000000000001 RCX:
0000000000438458
[ 31s] [ 3.795222] RDX: 0000000000000001 RSI: 000000000000003c RDI:
0000000000000001
[ 31s] [ 3.797537] RBP: 00000000006a23b0 R08: 00000000000000e7 R09:
ffffffffffffffc0
[ 31s] [ 3.799876] R10: 0000000000000000 R11: 0000000000000246 R12:
00000000006a23b0
[ 31s] [ 3.802195] R13: 00000000006a29c0 R14: 00000000006a0018 R15:
00000000004003d0
[ 31s] [ 3.807201] Kernel Offset: disabled
[ 31s] [ 3.808372] Rebooting in 1 seconds..
[ 32s] ### VM INTERACTION END ###
[ 32s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 32s] or the build host has a kernel or hardware problem...

gave up after 9 failed build attempts...
[ 0s] Using BUILD_ROOT=/var/cache/obs/worker/root_3/.mount
[ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel
[ 0s] Doing kvm build in /var/cache/obs/worker/root_3/root
[ 0s]
[ 0s]
[ 0s] build34 started "build acmbuild-Raspbian_10.dsc" at Sun Dec 1
11:19:46 UTC 2019.
[ 0s]
[ 0s] Building acmbuild for project 'home:m-grant-prg' repository
'Raspbian_10' arch 'armv7l' srcmd5 'd99ec3b876266900e65c1bd4c0ef1ab4'
[ 0s]
[ 0s] processing recipe
/var/cache/obs/worker/root_3/.build-srcdir/acmbuild-Raspbian_10.dsc ...
[ 0s] running changelog2spec --target debian --file
/var/cache/obs/worker/root_3/.build-srcdir/acmbuild-Raspbian_10.dsc
[ 0s] don't know how to convert changelog to format 'debian'
[ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs
--cachedir /var/cache/build --prepare --clean --rpmlist
/var/cache/obs/worker/root_3/.build.rpmlist
/var/cache/obs/worker/root_3/.build-srcdir/acmbuild-Raspbian_10.dsc build ...
[ 1s] cycle: libc6 -> libgcc1
[ 1s] breaking dependency libgcc1 -> libc6
[ 2s] [1/73] preinstalling e2fslibs...
[ 2s] [2/73] preinstalling gcc-8-base...
[ 2s] [3/73] preinstalling libsemanage-common...
[ 2s] [4/73] preinstalling lsb-base...
[ 2s] [5/73] preinstalling ncurses-base...
[ 2s] [6/73] preinstalling qemu-user-static...
[ 5s] [7/73] preinstalling sensible-utils...
[ 5s] [8/73] preinstalling libgcc1...
[ 5s] [9/73] preinstalling libc6...
[ 5s] [10/73] preinstalling bsdutils...
[ 5s] [11/73] preinstalling debianutils...
[ 5s] [12/73] preinstalling diffutils...
[ 5s] [13/73] preinstalling hostname...
[ 5s] [14/73] preinstalling insserv...
[ 6s] [15/73] preinstalling libattr1...
[ 6s] [16/73] preinstalling libbz2-1.0...
[ 6s] [17/73] preinstalling libc-bin...
[ 6s] [18/73] preinstalling libcom-err2...
[ 6s] [19/73] preinstalling libdb5.3...
[ 6s] [20/73] preinstalling libdebconfclient0...
[ 6s] [21/73] preinstalling liblzma5...
[ 6s] [22/73] preinstalling libncurses5...
[ 6s] [23/73] preinstalling libpcre3...
[ 7s] [24/73] preinstalling libsepol1...
[ 7s] [25/73] preinstalling libsigsegv2...
[ 7s] [26/73] preinstalling libslang2...
[ 7s] [27/73] preinstalling libsmartcols1...
[ 7s] [28/73] preinstalling libtinfo6...
[ 7s] [29/73] preinstalling libustr-1.0-1...
[ 7s] [30/73] preinstalling libuuid1...
[ 7s] [31/73] preinstalling multiarch-support...
[ 7s] [32/73] preinstalling zlib1g...
[ 7s] [33/73] preinstalling base-passwd...
[ 8s] [34/73] preinstalling libacl1...
[ 8s] [35/73] preinstalling libblkid1...
[ 8s] [36/73] preinstalling libselinux1...
[ 8s] [37/73] preinstalling libss2...
[ 8s] [38/73] preinstalling ncurses-bin...
[ 8s] [39/73] preinstalling xz-utils...
[ 8s] [40/73] preinstalling libperl5.28...
[ 9s] [41/73] preinstalling findutils...
[ 9s] [42/73] preinstalling libmount1...
[ 9s] [43/73] preinstalling sed...
[ 9s] [44/73] preinstalling tar...
[ 9s] [45/73] preinstalling coreutils...
[ 10s] [46/73] preinstalling e2fsprogs...
[ 10s] [47/73] preinstalling libsemanage1...
[ 10s] [48/73] preinstalling dpkg...
[ 10s] [49/73] preinstalling readline-common...
[ 10s] [50/73] preinstalling gzip...
[ 10s] [51/73] preinstalling perl-base...
[ 10s] [52/73] preinstalling grep...
[ 11s] [53/73] preinstalling debconf...
[ 11s] [54/73] preinstalling init-system-helpers...
[ 11s] [55/73] preinstalling libreadline7...
[ 11s] [56/73] preinstalling perl...
[ 11s] [57/73] preinstalling tzdata...
[ 11s] [58/73] preinstalling libpam0g...
[ 11s] [59/73] preinstalling gawk...
[ 11s] [60/73] preinstalling dash...
[ 12s] [61/73] preinstalling libpam-modules-bin...
[ 12s] [62/73] preinstalling libpam-modules...
[ 12s] [63/73] preinstalling libpam-runtime...
[ 12s] [64/73] preinstalling passwd...
[ 12s] [65/73] preinstalling user-setup...
[ 12s] [66/73] preinstalling login...
[ 12s] [67/73] preinstalling base-files...
[ 12s] [68/73] preinstalling util-linux...
[ 13s] [69/73] preinstalling sysvinit-utils...
[ 13s] [70/73] preinstalling bash...
[ 13s] [71/73] preinstalling mount...
[ 13s] [72/73] preinstalling sysv-rc...
[ 13s] [73/73] preinstalling initscripts...
[ 13s]
[ 13s] [1/1] preinstalling libdevmapper1.02.1...
[ 14s] copying packages...
[ 15s] reordering...cycle: libc6 -> libgcc1
[ 15s] breaking dependency libgcc1 -> libc6
[ 15s] cycle: debhelper -> dh-autoreconf
[ 15s] breaking dependency debhelper -> dh-autoreconf
[ 15s] cycle: dh-strip-nondeterminism -> debhelper
[ 15s] breaking dependency debhelper -> dh-strip-nondeterminism
[ 15s] done
[ 15s] objdump: /boot/vmlinuz: warning: ignoring section flag
IMAGE_SCN_MEM_NOT_PAGED in section .bss
[ 16s] booting kvm...
[ 16s] ### VM INTERACTION START ###
[ 16s] /usr/bin/qemu-kvm -nodefaults -no-reboot -nographic -vga none -cpu
host -object rng-random,filename=/dev/random,id=rng0 -device
virtio-rng-pci,rng=rng0 -runas qemu -net none -kernel /boot/vmlinuz -initrd
/boot/initrd -append root=/dev/sda rootfstype=ext3
rootflags=data=writeback,nobarrier,commit=150,noatime ext4.allow_unsupported=1
kpti=off pti=off spectre_v2=off panic=1 quiet no-kvmclock elevator=noop
nmi_watchdog=0 rw rd.driver.pre=binfmt_misc console=ttyS0
init=/.build/initvm.x86_64 -m 2200 -drive
file=/var/cache/obs/worker/root_3/root,format=raw,if=none,id=disk,cache=unsafe
-device ide-hd,drive=disk,serial=0 -drive
file=/var/cache/obs/worker/root_3/swap,format=raw,if=none,id=swap,cache=unsafe
-device ide-hd,drive=swap,serial=1 -serial stdio -chardev
socket,id=monitor,server,nowait,path=/var/cache/obs/worker/root_3/root.qemu/monitor
-mon chardev=monitor,mode=readline -smp 6
[ 17s] c[?7lSeaBIOS (version
rel-1.12.0-0-ga698c89-rebuilt.opensuse.org)
[ 21s] Booting from ROM..c[?7lNo such file or directory
[ 21s] execve of /.buil[ 3.614224] Kernel panic - not syncing: Attempted
to kill init! exitcode=0x00000100
[ 21s] [ 3.614224]
[ 21s] [ 3.615223] CPU: 1 PID: 1 Comm: initvm.x86_64 Not tainted
4.12.14-lp151.28.32-default #1 openSUSE Leap 15.1
[ 21s] [ 3.616402] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.12.0-0-ga698c89-rebuilt.opensuse.org 04/01/2014
[ 21s] [ 3.617600] Call Trace:
[ 21s] [ 3.617880] dump_stack+0x5c/0x86
[ 21s] [ 3.617941] panic+0xd5/0x233
[ 21s] [ 3.617941] ? perf_event_exit_task+0xc9/0x360
[ 21s] [ 3.617941] do_exit+0xb8a/0xb90
[ 21s] [ 3.617941] ? __do_page_fault+0x256/0x4c0
[ 21s] [ 3.617941] do_group_exit+0x3a/0xb0
[ 21s] [ 3.617941] SyS_exit_group+0x10/0x20
[ 21s] [ 3.617941] do_syscall_64+0x7b/0x160
[ 21s] [ 3.617941] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 21s] [ 3.617941] RIP: 0033:0x438458
[ 21s] [ 3.617941] RSP: 002b:00007ffcfccd7748 EFLAGS: 00000246 ORIG_RAX:
00000000000000e7
[ 21s] [ 3.617941] RAX: ffffffffffffffda RBX: 0000000000000001 RCX:
0000000000438458
[ 21s] [ 3.617941] RDX: 0000000000000001 RSI: 000000000000003c RDI:
0000000000000001
[ 21s] [ 3.624337] RBP: 00000000006a23b0 R08: 00000000000000e7 R09:
ffffffffffffffc0
[ 21s] [ 3.624337] R10: 0000000000000000 R11: 0000000000000246 R12:
00000000006a23b0
[ 21s] [ 3.624337] R13: 00000000006a29c0 R14: 00000000006a0018 R15:
00000000004003d0
[ 21s] [ 3.624337] Kernel Offset: disabled
[ 21s] [ 3.624337] Rebooting in 1 seconds..
[ 22s] ### VM INTERACTION END ###
[ 22s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 22s] or the build host has a kernel or hardware problem...

gave up after 9 failed build attempts...
< Previous Next >
Follow Ups