Mailinglist Archive: opensuse-buildservice (63 mails)

< Previous Next >
Re: [opensuse-buildservice] Problems with aarch64 buildhost[s]
  • From: Harald Welte <laforge@xxxxxxxxxxxx>
  • Date: Thu, 17 May 2018 23:36:18 +0200
  • Message-id: <20180517213618.GB6294@nataraja>
Dear OBS community,

just FYI: It's now one week later, but aarch64 builds are still failing
consistently
throughout that period until today.

We'll now be disabling our osmocom.org aarch64 builds until further notice, to
prevent
the dozens of build failure notifications every night.

Thanks again for all your efforts.

Regards,
Harald

On Thu, May 10, 2018 at 09:23:47AM +0200, Harald Welte wrote:
Dear OBS community,

from last night onwards pretty much all of our aarch64 builds are failing
due to what appears to be some serious problems on the buildhost (see attached
mails with log snippets).

among the "interesting" messages are:

[ 328s] [ 291.436030] dracut-initqueue[468]: Warning: Could not boot.

[ 347s] qemu-system-aarch64: terminating on signal 15 from pid 38856 (fuser)

[ 340s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###

[ 18s] objdump: /boot/Image.guest: File format not recognized

[ 322s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist

This is not critical for us, but I guess somebody will want to have a look at
this
at some point :) Thanks!

Regards,
Harald
--
- Harald Welte <laforge@xxxxxxxxxxxx> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)

Date: Wed, 09 May 2018 23:56:59 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-pcap in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-pcap/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-pcap failed to build in
Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcap

Last lines of build log:
[ 287s] [ 255.533075] dracut-initqueue[474]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 288s] [ 256.340462] dracut-initqueue[474]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 288s] [ 256.981985] dracut-initqueue[474]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 289s] [ 257.625105] dracut-initqueue[474]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 290s] [ 258.463060] dracut-initqueue[474]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 290s] [ 258.469300] dracut-initqueue[474]: Warning: Could not boot.
[ 290s] Starting Setup Virtual Console...
[ 290s] [ OK ] Started Setup Virtual Console.
[ 290s] Starting Dracut Emergency Shell...
[ 290s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 290s]
[ 290s] Generating "/run/initramfs/rdsosreport.txt"
[ 291s]
[ 291s]
[ 291s] Entering emergency mode. Exit the shell to continue.
[ 291s] Type "journalctl" to view system logs.
[ 291s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 291s] after mounting them and attach it to a bug report.
[ 291s]
[ 291s]
[ 340s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 342s] /var/cache/obs/worker/root_18/root: 32805
[ 342s] qemu-system-aarch64: terminating on signal 15 from pid 13428 (fuser)
[ 342s] ### VM INTERACTION END ###
[ 342s] /var/run/obs/worker/18/build/build-vm: line 458: kill: (32796) - No
such process
[ 342s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 342s] or the build host has a kernel or hardware problem...

gave up after 12 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 00:27:15 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-sip-connector in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-sip-connector/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-sip-connector failed to build in
Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-sip-connector

Last lines of build log:
[ 334s] [ 288.635974] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 335s] [ 289.341341] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 335s] [ 290.013001] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 336s] [ 290.725797] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 337s] [ 291.469633] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 338s] [ 292.308498] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 338s] [ 293.053594] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 339s] [ 293.793698] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 340s] [ 294.520236] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 341s] [ 295.339046] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 341s] [ 295.965900] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 342s] [ 296.645742] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 343s] [ 297.425038] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 343s] [ 298.067127] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 344s] ### WATCHDOG TRIGGERED, KILLING VM ###
[ 344s] [ 298.729273] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 345s] [ 299.381340] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 345s] [ 299.997850] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 346s] [ 300.716520] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 347s] [ 301.419016] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 347s] [ 302.086701] dracut-initqueue[467]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 347s] /var/cache/obs/worker/root_23/root: 17469
[ 347s] qemu-system-aarch64: terminating on signal 15 from pid 38856 (fuser)
[ 348s] ### VM INTERACTION END ###
[ 348s] /var/run/obs/worker/23/build/build-vm: line 458: kill: (17461) - No
such process
[ 348s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 348s] or the build host has a kernel or hardware problem...

gave up after 12 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 00:29:50 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/libosmo-netif in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/libosmo-netif/Debian_9.0/aarch64

Package network:osmocom:nightly/libosmo-netif failed to build in
Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-netif

Last lines of build log:
[ 326s] [ 288.665100] dracut-initqueue[468]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 326s] [ 289.324650] dracut-initqueue[468]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 327s] [ 290.003074] dracut-initqueue[468]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 328s] [ 290.676055] dracut-initqueue[468]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 328s] [ 291.429474] dracut-initqueue[468]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 328s] [ 291.436030] dracut-initqueue[468]: Warning: Could not boot.
[ 329s] Starting Setup Virtual Console...
[ 329s] [ OK ] Started Setup Virtual Console.
[ 329s] Starting Dracut Emergency Shell...
[ 329s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 329s]
[ 329s] Generating "/run/initramfs/rdsosreport.txt"
[ 329s]
[ 329s]
[ 329s] Entering emergency mode. Exit the shell to continue.
[ 329s] Type "journalctl" to view system logs.
[ 329s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 329s] after mounting them and attach it to a bug report.
[ 329s]
[ 329s]
[ 339s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 341s] /var/cache/obs/worker/root_15/root: 29927
[ 341s] qemu-system-aarch64: terminating on signal 15 from pid 46684 (fuser)
[ 341s] ### VM INTERACTION END ###
[ 341s] /var/run/obs/worker/15/build/build-vm: line 458: kill: (29920) - No
such process
[ 341s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 341s] or the build host has a kernel or hardware problem...

gave up after 12 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 00:34:25 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-pcu in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-pcu/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-pcu failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-pcu

Last lines of build log:
[ 326s] [ 268.367557] dracut-initqueue[475]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 327s] [ 269.051609] dracut-initqueue[475]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 327s] [ 269.796728] dracut-initqueue[475]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 328s] [ 270.647051] dracut-initqueue[475]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 329s] [ 271.235551] dracut-initqueue[475]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 329s] [ 271.242228] dracut-initqueue[475]: Warning: Could not boot.
[ 329s] Starting Setup Virtual Console...
[ 329s] [ OK ] Started Setup Virtual Console.
[ 329s] Starting Dracut Emergency Shell...
[ 329s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 329s]
[ 329s] Generating "/run/initramfs/rdsosreport.txt"
[ 330s]
[ 330s]
[ 330s] Entering emergency mode. Exit the shell to continue.
[ 330s] Type "journalctl" to view system logs.
[ 330s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 330s] after mounting them and attach it to a bug report.
[ 330s]
[ 330s]
[ 362s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 363s] /var/cache/obs/worker/root_2/root: 41975
[ 363s] qemu-system-aarch64: terminating on signal 15 from pid 16751 (fuser)
[ 363s] ### VM INTERACTION END ###
[ 363s] /var/run/obs/worker/2/build/build-vm: line 458: kill: (41946) - No
such process
[ 363s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 363s] or the build host has a kernel or hardware problem...

gave up after 13 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 01:15:16 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-trx in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-trx/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-trx failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-trx

Last lines of build log:
[ 324s] [ 263.146782] dracut-initqueue[462]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 324s] [ 263.737183] dracut-initqueue[462]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 325s] [ 264.341515] dracut-initqueue[462]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 325s] [ 265.010589] dracut-initqueue[462]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 326s] [ 265.686389] dracut-initqueue[462]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 326s] [ 265.714508] dracut-initqueue[462]: Warning: Could not boot.
[ 326s] Starting Setup Virtual Console...
[ 326s] [ OK ] Started Setup Virtual Console.
[ 326s] Starting Dracut Emergency Shell...
[ 326s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 326s]
[ 326s] Generating "/run/initramfs/rdsosreport.txt"
[ 327s]
[ 327s]
[ 327s] Entering emergency mode. Exit the shell to continue.
[ 327s] Type "journalctl" to view system logs.
[ 327s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 327s] after mounting them and attach it to a bug report.
[ 327s]
[ 327s]
[ 365s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 366s] /var/cache/obs/worker/root_20/root: 27904
[ 366s] qemu-system-aarch64: terminating on signal 15 from pid 4942 (fuser)
[ 366s] ### VM INTERACTION END ###
[ 366s] /var/run/obs/worker/20/build/build-vm: line 458: kill: (27891) - No
such process
[ 366s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 366s] or the build host has a kernel or hardware problem...

gave up after 12 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 01:38:59 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-bts in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-bts/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-bts failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-bts

Last lines of build log:
[ 288s] [ 252.508226] dracut-initqueue[493]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 288s] [ 253.133959] dracut-initqueue[493]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 289s] [ 253.830477] dracut-initqueue[493]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 290s] [ 254.520365] dracut-initqueue[493]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 290s] [ 255.131042] dracut-initqueue[493]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 290s] [ 255.137609] dracut-initqueue[493]: Warning: Could not boot.
[ 290s] Starting Setup Virtual Console...
[ 290s] [ OK ] Started Setup Virtual Console.
[ 290s] Starting Dracut Emergency Shell...
[ 290s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 290s]
[ 290s] Generating "/run/initramfs/rdsosreport.txt"
[ 291s]
[ 291s]
[ 291s] Entering emergency mode. Exit the shell to continue.
[ 291s] Type "journalctl" to view system logs.
[ 291s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 291s] after mounting them and attach it to a bug report.
[ 291s]
[ 291s]
[ 341s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 342s] /var/cache/obs/worker/root_6/root: 16372
[ 342s] qemu-system-aarch64: terminating on signal 15 from pid 2275
(<unknown process>)
[ 342s] ### VM INTERACTION END ###
[ 342s] /var/run/obs/worker/6/build/build-vm: line 458: kill: (16362) - No
such process
[ 342s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 342s] or the build host has a kernel or hardware problem...

gave up after 13 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 02:12:59 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-hlr in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-hlr/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-hlr failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-hlr

Last lines of build log:
[ 310s] [ 271.307403] dracut-initqueue[445]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 311s] [ 272.035066] dracut-initqueue[445]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 312s] [ 272.723359] dracut-initqueue[445]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 312s] [ 273.378441] dracut-initqueue[445]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 313s] [ 274.077913] dracut-initqueue[445]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 313s] [ 274.090871] dracut-initqueue[445]: Warning: Could not boot.
[ 313s] Starting Setup Virtual Console...
[ 313s] [ OK ] Started Setup Virtual Console.
[ 313s] Starting Dracut Emergency Shell...
[ 313s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 313s]
[ 313s] Generating "/run/initramfs/rdsosreport.txt"
[ 315s]
[ 315s]
[ 315s] Entering emergency mode. Exit the shell to continue.
[ 315s] Type "journalctl" to view system logs.
[ 315s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 315s] after mounting them and attach it to a bug report.
[ 315s]
[ 315s]
[ 339s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 340s] /var/cache/obs/worker/root_30/root: 27275
[ 340s] qemu-system-aarch64: terminating on signal 15 from pid 6246 (fuser)
[ 340s] ### VM INTERACTION END ###
[ 340s] /var/run/obs/worker/30/build/build-vm: line 458: kill: (27268) - No
such process
[ 340s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 340s] or the build host has a kernel or hardware problem...

gave up after 12 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 03:04:59 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-iuh in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-iuh/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-iuh failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-iuh

Last lines of build log:
[ 319s] [ 274.220813] dracut-initqueue[458]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 320s] [ 274.846570] dracut-initqueue[458]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 321s] [ 275.505844] dracut-initqueue[458]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 321s] [ 276.146389] dracut-initqueue[458]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 322s] [ 276.815662] dracut-initqueue[458]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 322s] [ 276.823865] dracut-initqueue[458]: Warning: Could not boot.
[ 322s] Starting Setup Virtual Console...
[ 322s] [ OK ] Started Setup Virtual Console.
[ 322s] Starting Dracut Emergency Shell...
[ 322s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 322s]
[ 322s] Generating "/run/initramfs/rdsosreport.txt"
[ 322s]
[ 322s]
[ 322s] Entering emergency mode. Exit the shell to continue.
[ 322s] Type "journalctl" to view system logs.
[ 322s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 322s] after mounting them and attach it to a bug report.
[ 322s]
[ 322s]
[ 337s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 337s] /var/cache/obs/worker/root_17/root: 42909
[ 337s] qemu-system-aarch64: terminating on signal 15 from pid 31945 ()
[ 337s] ### VM INTERACTION END ###
[ 337s] /var/run/obs/worker/17/build/build-vm: line 458: kill: (42902) - No
such process
[ 338s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 338s] or the build host has a kernel or hardware problem...

gave up after 10 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 01:59:16 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/libosmo-sccp in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/libosmo-sccp/Debian_9.0/aarch64

Package network:osmocom:nightly/libosmo-sccp failed to build in
Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly libosmo-sccp

Last lines of build log:
[ 13s] [67/70] preinstalling sysvinit-utils...
[ 13s] [68/70] preinstalling e2fsprogs...
[ 14s] [69/70] preinstalling sysv-rc...
[ 14s] [70/70] preinstalling initscripts...
[ 14s]
[ 14s] [1/1] preinstalling libdevmapper1.02.1...
[ 15s] copying packages...
[ 18s] reordering...cycle: libc6 -> libgcc1
[ 18s] breaking dependency libgcc1 -> libc6
[ 18s] cycle: debhelper -> dh-autoreconf
[ 18s] breaking dependency debhelper -> dh-autoreconf
[ 18s] cycle: dh-strip-nondeterminism -> debhelper
[ 18s] breaking dependency debhelper -> dh-strip-nondeterminism
[ 18s] done
[ 18s] objdump: /boot/Image.guest: File format not recognized
[ 21s] booting kvm...
[ 22s] ### VM INTERACTION START ###
[ 22s] /usr/bin/qemu-system-aarch64 -nodefaults -no-reboot -nographic -vga
none -enable-kvm -cpu host -M virt,gic-version=host -object
rng-random,filename=/dev/hwrng,id=rng0 -device virtio-rng-device,rng=rng0
-runas qemu -net none -kernel /boot/Image.guest -initrd /boot/initrd.guest
-append root=/dev/disk/by-id/virtio-0 rootfstype=ext4 rootflags=noatime
panic=1 quiet no-kvmclock nmi_watchdog=0 rw rd.driver.pre=binfmt_misc
elevator=noop console=ttyAMA0 init=/.build/build -m 2048 -drive
file=/var/cache/obs/worker/root_6/root,format=raw,if=none,id=disk,serial=0,cache=unsafe
-device virtio-blk-device,drive=disk -drive
file=/var/cache/obs/worker/root_6/swap,format=raw,if=none,id=swap,serial=1,cache=unsafe
-device virtio-blk-device,drive=swap -serial stdio -chardev
socket,id=monitor,server,nowait,path=/var/cache/obs/worker/root_6/root.qemu/monitor
-mon chardev=monitor,mode=readline -smp 4
[ 22s] qemu-system-aarch64: -drive
file=/var/cache/obs/worker/root_6/root,format=raw,if=none,id=disk,serial=0,cache=unsafe:
'serial' is deprecated, please use the corresponding option of '-device'
instead
[ 22s] qemu-system-aarch64: -drive
file=/var/cache/obs/worker/root_6/swap,format=raw,if=none,id=swap,serial=1,cache=unsafe:
'serial' is deprecated, please use the corresponding option of '-device'
instead
[ 328s] ### WATCHDOG TRIGGERED, KILLING VM ###
[ 328s] /var/cache/obs/worker/root_6/root: 24789
[ 328s] qemu-system-aarch64: terminating on signal 15 from pid 30317 ()
[ 328s] ### VM INTERACTION END ###
[ 328s] /var/run/obs/worker/6/build/build-vm: line 458: kill: (24757) - No
such process
[ 328s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 328s] or the build host has a kernel or hardware problem...

gave up after 11 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 02:02:59 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-mgw in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-mgw/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-mgw failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-mgw

Last lines of build log:
[ 289s] [ 258.056108] dracut-initqueue[456]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 289s] [ 258.748078] dracut-initqueue[456]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 290s] [ 259.460723] dracut-initqueue[456]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 291s] [ 260.137201] dracut-initqueue[456]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 292s] [ 260.806194] dracut-initqueue[456]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 292s] [ 260.813245] dracut-initqueue[456]: Warning: Could not boot.
[ 292s] Starting Setup Virtual Console...
[ 292s] [ OK ] Started Setup Virtual Console.
[ 292s] Starting Dracut Emergency Shell...
[ 292s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 292s]
[ 292s] Generating "/run/initramfs/rdsosreport.txt"
[ 292s]
[ 292s]
[ 292s] Entering emergency mode. Exit the shell to continue.
[ 292s] Type "journalctl" to view system logs.
[ 292s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 292s] after mounting them and attach it to a bug report.
[ 292s]
[ 292s]
[ 334s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 335s] /var/cache/obs/worker/root_21/root: 20457
[ 335s] qemu-system-aarch64: terminating on signal 15 from pid 47289 ()
[ 335s] ### VM INTERACTION END ###
[ 335s] /var/run/obs/worker/21/build/build-vm: line 458: kill: (20447) - No
such process
[ 335s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 335s] or the build host has a kernel or hardware problem...

gave up after 12 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 03:30:25 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/openbsc in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/openbsc/Debian_9.0/aarch64

Package network:osmocom:nightly/openbsc failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly openbsc

Last lines of build log:
[ 321s] [ 281.204438] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 322s] [ 281.826838] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 323s] [ 282.485707] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 323s] [ 283.156951] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 324s] [ 283.805781] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 325s] [ 284.476808] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 325s] [ 285.116480] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 326s] [ 285.787609] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 327s] [ 286.435795] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 327s] [ 287.036819] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 328s] [ 287.686070] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 329s] [ 288.326598] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 329s] [ 288.996061] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 330s] [ 289.646693] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 331s] [ 290.335875] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 331s] [ 290.966947] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 332s] [ 291.585575] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 333s] [ 292.217080] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 333s] ### WATCHDOG TRIGGERED, KILLING VM ###
[ 333s] [ 292.825875] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 334s] [ 293.446891] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 334s] /var/cache/obs/worker/root_9/root: 15294
[ 334s] qemu-system-aarch64: terminating on signal 15 from pid 46467 ()
[ 334s] ### VM INTERACTION END ###
[ 334s] /var/run/obs/worker/9/build/build-vm: line 458: kill: (15279) - No
such process
[ 334s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 334s] or the build host has a kernel or hardware problem...

gave up after 11 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 03:40:42 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-bsc in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-bsc/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-bsc failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-bsc

Last lines of build log:
[ 334s] [ 296.158894] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 335s] [ 296.950431] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 336s] [ 297.644363] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 337s] [ 298.337569] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 337s] [ 299.078545] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 338s] [ 299.726713] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 339s] [ 300.435680] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 339s] [ 301.096394] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 340s] [ 301.686831] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 341s] [ 302.530987] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 341s] [ 303.176840] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 342s] [ 303.864445] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 343s] [ 304.480152] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 343s] [ 305.176964] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 344s] [ 305.899673] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 345s] [ 306.637132] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 346s] [ 307.375342] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 346s] [ 308.192437] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 347s] ### WATCHDOG TRIGGERED, KILLING VM ###
[ 347s] [ 308.883039] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 348s] [ 309.583432] dracut-initqueue[449]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 348s] /var/cache/obs/worker/root_11/root: 22855
[ 348s] qemu-system-aarch64: terminating on signal 15 from pid 1339 (fuser)
[ 348s] ### VM INTERACTION END ###
[ 348s] /var/run/obs/worker/11/build/build-vm: line 458: kill: (22844) - No
such process
[ 348s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 348s] or the build host has a kernel or hardware problem...

gave up after 12 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 04:18:07 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-sgsn in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-sgsn/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-sgsn failed to build in
Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-sgsn

Last lines of build log:
[ 363s] [ 299.919831] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 364s] [ 300.568788] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 365s] [ 301.190918] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 365s] [ 301.792257] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 366s] [ 302.539567] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 367s] [ 303.215832] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 367s] [ 303.867144] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 368s] [ 304.509769] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 369s] [ 305.146383] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 369s] ### WATCHDOG TRIGGERED, KILLING VM ###
[ 369s] [ 305.796789] dracut-initqueue[461]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 369s] [ 305.803694] dracut-initqueue[461]: Warning: Could not boot.
[ 369s] Starting Setup Virtual Console...
[ 369s] [ OK ] Started Setup Virtual Console.
[ 369s] Starting Dracut Emergency Shell...
[ 370s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 370s]
[ 370s] Generating "/run/initramfs/rdsosreport.txt"
[ 375s]
[ 375s]
[ 375s] Entering emergency mode. Exit the shell to continue.
[ 375s] T/var/cache/obs/worker/root_6/root: 29596
[ 375s] ypqemu-system-aarch64: terminating on signal 15 from pid 3353 ()
[ 375s] e### VM INTERACTION END ###
[ 375s] /var/run/obs/worker/6/build/build-vm: line 458: kill: (29585) - No
such process
[ 375s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 375s] or the build host has a kernel or hardware problem...

gave up after 11 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)

Date: Thu, 10 May 2018 04:22:59 +0000
From: OBS Notification <admin@xxxxxxxxxxxx>
To: Alexander Couzens <lynxis@xxxxxxx>, Harald Welte
<laforge@xxxxxxxxxxxx>, OpenBSC gerrit-log Mailing List
<gerrit-log@xxxxxxxxxxxxxxxxx>
Subject: Build failure of network:osmocom:nightly/osmo-msc in
Debian_9.0/aarch64
X-Mailer: OBS Notification System

Visit
https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/osmo-msc/Debian_9.0/aarch64

Package network:osmocom:nightly/osmo-msc failed to build in Debian_9.0/aarch64

Check out the package for editing:
osc checkout network:osmocom:nightly osmo-msc

Last lines of build log:
[ 305s] [ 257.656639] dracut-initqueue[480]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 306s] [ 258.407351] dracut-initqueue[480]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 307s] [ 259.098133] dracut-initqueue[480]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 307s] [ 259.727334] dracut-initqueue[480]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 308s] [ 260.393702] dracut-initqueue[480]: Warning: dracut-initqueue
timeout - starting timeout scripts
[ 308s] [ 260.405743] dracut-initqueue[480]: Warning: Could not boot.
[ 308s] Starting Setup Virtual Console...
[ 308s] [ OK ] Started Setup Virtual Console.
[ 308s] Starting Dracut Emergency Shell...
[ 308s] Warning: /dev/disk/by-uuid/00750419-b769-40be-aa7a-a81dca13c577 does
not exist
[ 308s]
[ 308s] Generating "/run/initramfs/rdsosreport.txt"
[ 309s]
[ 309s]
[ 309s] Entering emergency mode. Exit the shell to continue.
[ 309s] Type "journalctl" to view system logs.
[ 309s] You might want to save "/run/initramfs/rdsosreport.txt" to a USB
stick or /boot
[ 309s] after mounting them and attach it to a bug report.
[ 309s]
[ 309s]
[ 355s] dracut:/# ### WATCHDOG TRIGGERED, KILLING VM ###
[ 356s] /var/cache/obs/worker/root_3/root: 40802
[ 356s] qemu-system-aarch64: terminating on signal 15 from pid 13075 (fuser)
[ 356s] ### VM INTERACTION END ###
[ 356s] /var/run/obs/worker/3/build/build-vm: line 458: kill: (40784) - No
such process
[ 356s] No buildstatus set, either the base system is broken
(kernel/initrd/udev/glibc/bash/perl)
[ 356s] or the build host has a kernel or hardware problem...

gave up after 11 failed build attempts...

--
Configure notifications at https://build.opensuse.org/user/notifications
openSUSE Build Service (https://build.opensuse.org/)


--
- Harald Welte <laforge@xxxxxxxxxxxx> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)

--
To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-buildservice+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups
References