http://bugzilla.opensuse.org/show_bug.cgi?id=1148317
http://bugzilla.opensuse.org/show_bug.cgi?id=1148317#c7
--- Comment #7 from Jiří Zlonický
If the old TW worked, it'd be great if you can figure out which kernel started regression. You can find some old packages in the OBS history repo, http://download.opensuse.org/history/
Try to install the old kernel package on the working system, and retest with it.
I tested the oldest kernel from history: kernel-default-5.1.15-1.1.x86_64.rpm. It gives the same error. Next a tested kernel from Leap 15.1: kernel-default-4.12.14-lp151.27.3.x86_64.rpm It gives the same error. To exclude HW problem I booted from external usb flash with instalation iso Leap 15.0 ("rescue"). Than I connected problematic disk and it worked OK. Than accidently leav problematic disk connected in usb port and rebooted. It works OK (with kernel 5.2.9-1-default). When I disconnect it form port and reconnect again - same error. I try: udevadm monitor -s block -k -u -p and see: monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent KERNEL[174.795316] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.2/2-2.2.2:1.0/host7/target7:0:0/7:0:0:0/block/sdd (block) ACTION=add DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.2/2-2.2.2:1.0/host7/target7:0:0/7:0:0:0/block/sdd SUBSYSTEM=block DEVNAME=/dev/sdd DEVTYPE=disk SEQNUM=7306 MAJOR=8 MINOR=48 KERNEL[174.795411] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.2/2-2.2.2:1.0/host7/target7:0:0/7:0:0:0/block/sdd/sdd1 (block) ACTION=add DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.2/2-2.2.2:1.0/host7/target7:0:0/7:0:0:0/block/sdd/sdd1 SUBSYSTEM=block DEVNAME=/dev/sdd1 DEVTYPE=partition PARTN=1 SEQNUM=7307 MAJOR=8 MINOR=49 UDEV [175.107492] add /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.2/2-2.2.2:1.0/host7/target7:0:0/7:0:0:0/block/sdd (block) ACTION=add DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.2/2-2.2.2:1.0/host7/target7:0:0/7:0:0:0/block/sdd SUBSYSTEM=block DEVNAME=/dev/sdd DEVTYPE=disk SEQNUM=7306 USEC_INITIALIZED=175106785 DONT_DEL_PART_NODES=1 ID_VENDOR=ADATA ID_VENDOR_ENC=ADATA\x20\x20\x20 ID_VENDOR_ID=125f ID_MODEL=HDD_CH94 ID_MODEL_ENC=HDD\x20CH94\x20\x20\x20\x20\x20\x20\x20\x20 ID_MODEL_ID=a94a ID_REVISION=0160 ID_SERIAL=ADATA_HDD_CH94_CH0150805213-0:0 ID_SERIAL_SHORT=CH0150805213 ID_TYPE=disk ID_INSTANCE=0:0 ID_BUS=usb ID_USB_INTERFACES=:080650: ID_USB_INTERFACE_NUM=00 ID_USB_DRIVER=usb-storage ID_PATH=pci-0000:00:14.0-usb-0:2.2.2:1.0-scsi-0:0:0:0 ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_2_2_1_0-scsi-0_0_0_0 .SYSFS_PATH=/sys/class/scsi_device/7:0:0:0/device .INQUIRY_DEV=/dev/sdd SCSI_TPGS=0 SCSI_TYPE=disk SCSI_VENDOR=ADATA SCSI_VENDOR_ENC=ADATA\x20\x20\x20 SCSI_MODEL=HDD_CH94 SCSI_MODEL_ENC=HDD\x20CH94\x20\x20\x20\x20\x20\x20\x20\x20 SCSI_REVISION=00 ID_SCSI=1 MPATH_SBIN_PATH=/sbin .SAVED_FM_WAIT_UNTIL= DM_MULTIPATH_DEVICE_PATH=0 FC_TARGET_LUN=0 .IS_MQ=1 ID_PART_TABLE_UUID=7cc57d55 ID_PART_TABLE_TYPE=dos COMPAT_SYMLINK_GENERATION=1 .ID_FS_TYPE_NEW= ID_FS_TYPE= MAJOR=8 MINOR=48 DEVLINKS=/dev/disk/by-path/pci-0000:00:14.0-usb-0:2.2.2:1.0-scsi-0:0:0:0 /dev/disk/by-id/usb-ADATA_HDD_CH94_CH0150805213-0:0 TAGS=:systemd: Comaprision with Leap 15.1 (on other computer) gives: Missing last message in add event: USEC_INITIALIZED= and difference in COMPAT_SYMLINK_GENERATION (on Leap 15.1 it is 2) and MINOR (on Leap 15.1 it is 32) What can I test next? -- You are receiving this mail because: You are on the CC list for the bug.