http://bugzilla.opensuse.org/show_bug.cgi?id=1123900
http://bugzilla.opensuse.org/show_bug.cgi?id=1123900#c9
Dave Corrie changed:
What |Removed |Added
----------------------------------------------------------------------------
Flags|needinfo?(suse@davecorrie.c |
|om) |
--- Comment #9 from Dave Corrie ---
Yes, that's the correct model number for this laptop. The hwinfo command
running under openSUSE Leap 42.3 shows these graphics cards are present:
19: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.386]
Unique ID: _Znp.YYkfCa54gtA
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Device Name: "Onboard IGD"
Model: "Intel HD Graphics 630"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x591b "HD Graphics 630"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x07be
Revision: 0x04
Driver: "i915"
Driver Modules: "i915"
Memory Range: 0xeb000000-0xebffffff (rw,non-prefetchable)
Memory Range: 0x80000000-0x8fffffff (ro,non-prefetchable)
I/O Ports: 0xf000-0xf03f (rw)
IRQ: 131 (1152698 events)
Module Alias: "pci:v00008086d0000591Bsv00001028sd000007BEbc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Config Status: cfg=no, avail=yes, need=no, active=unknown
36: PCI 100.0: 0302 3D controller
[Created at pci.386]
Unique ID: VCu0.sRZ0RayInC7
Parent ID: vSkL.mFcJbPekmnF
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "nVidia GP107M [GeForce GTX 1050 Mobile]"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x1c8d "GP107M [GeForce GTX 1050 Mobile]"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x07be
Revision: 0xa1
Memory Range: 0xec000000-0xecffffff (rw,non-prefetchable)
Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
Memory Range: 0xd0000000-0xd1ffffff (ro,non-prefetchable)
I/O Ports: 0xe000-0xefff (rw,disabled)
Memory Range: 0xed000000-0xed07ffff (ro,non-prefetchable,disabled)
IRQ: 255 (no events)
Module Alias: "pci:v000010DEd00001C8Dsv00001028sd000007BEbc03sc02i00"
Driver Info #0:
Driver Status: nouveau is not active
Driver Activation Cmd: "modprobe nouveau"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
With the 4.4.165-81-default kernel from my Leap 42.3 installation, I don't see
any problems reported in dmesg. I fear this data point is not so useful given
the much older kernel.
--
You are receiving this mail because:
You are on the CC list for the bug.