http://bugzilla.opensuse.org/show_bug.cgi?id=1101244
http://bugzilla.opensuse.org/show_bug.cgi?id=1101244#c2
--- Comment #2 from Mark Stutter ---
Hello David,
I think the problem is indeed that the card is recognized as a 100mbit card.
The output of ethtool enp0s25 says it only has a speed of 100Mb/s:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 2
Transceiver: internal
Auto-negotiation: off
MDI-X: on (auto)
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
For some reason after a recent kernel update I now get speed of around 3MB/s
wich should be close to the 100Mbit/s, right?
Can you compare the output of the command on your system?
--
You are receiving this mail because:
You are on the CC list for the bug.