http://bugzilla.opensuse.org/show_bug.cgi?id=908429
--- Comment #10 from Leonardo Mattos ---
Hi Jeff and Joey,
First of all, I did installed back the package laptop-mode-tools, then I
pulled/put back the AC adapter, and of course I got:
[ 423.295044] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 434.693919] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
[ 434.849501] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=600
[ 441.068060] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 441.113137] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 441.219563] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=0
[ 441.374518] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
[ 442.355693] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe
frozen
[ 442.355708] ata2.00: irq_stat 0x00400000, PHY RDY changed
[ 442.355710] ata2: SError: { PHYRdyChg CommWake }
[ 442.355714] sr 1:0:0:0: CDB:
[ 442.355716] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 442.355724] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392
in
res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[ 442.355726] ata2.00: status: { DRDY }
[ 442.355731] ata2: hard resetting link
[ 443.081198] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 443.089177] ata2.00: configured for UDMA/133
[ 443.103254] ata2: EH complete
Then, as proposed I did the change from CONTROL_INTEL_SATA_POWER="auto" to
CONTROL_INTEL_SATA_POWER="0" in
/etc/laptop-mode/conf.d/intel-sata-powermgmt.conf.
Again I pulled/put back the AC adapter and miraculously I didn't get any error:
[ 532.063658] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
[ 532.134251] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=600
[ 539.866756] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 539.902488] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 539.903543] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=0
[ 539.930200] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
What seems to point that you guys nailed it!!!!! THANK YOU!!
I did also attached my full dmesg commands for further analysis.
Again, thank you!!
--
You are receiving this mail because:
You are on the CC list for the bug.