https://bugzilla.novell.com/show_bug.cgi?id=811699
https://bugzilla.novell.com/show_bug.cgi?id=811699#c4
--- Comment #4 from Peter Tselios 2013-11-25 09:05:05 UTC ---
Exactly the SAME issue after the upgrade to 13.1:
Some additional information:
-------------------------------------------------------------
cat /etc/grub.conf
setup --stage2=/boot/grub/stage2 --force-lba (hd0,0) (hd0,0)
setup --stage2=/boot/grub/stage2 --force-lba (hd0) (hd0,0)
quit
-------------------------------------------------------------
cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on Tue Nov 19 21:18:55 EET 2013
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# For the new kernel it try to figure out old parameters. In case we are not
able to recognize it (e.g. change of flavor or strange install order ) it it
use as fallback installation parameters from /etc/sysconfig/bootloader
default 0
timeout 5
##YaST - generic_mbr
gfxmenu (hd0,0)/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE - 3.11.6-4
root (hd0)
kernel /vmlinuz-3.11.6-4-desktop root=/dev/mapper/VGDisk-LVRoot
resume=/dev/disk/by-uuid/ac82d4b0-3b8e-418e-bf8e-046d930cfe57 splash=silent
quiet showopts vga=0x31b
initrd /initrd-3.11.6-4-desktop
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE - 3.11.6-4
root (hd0)
kernel /vmlinuz-3.11.6-4-desktop root=/dev/mapper/VGDisk-LVRoot showopts
apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off
processor.max_cstate=1 nomodeset x11failsafe vga=0x336
initrd /initrd-3.11.6-4-desktop
-------------------------------------------------------------
Note:
The gfxmenu is **correctly** set
The root statement is **WRONG**
The correct statement is root (hd0,0).
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.