https://bugzilla.novell.com/show_bug.cgi?id=696810
https://bugzilla.novell.com/show_bug.cgi?id=696810#c5
Alexander Teterkin changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |A.Teterkin@hostco.ru
--- Comment #5 from Alexander Teterkin 2011-08-03 13:47:53 UTC ---
Hello,
I guess my problem is related.
I have Opensuse 11.4 64-bit on HP ProBook 5310m.
I can see the picture on my Samsung P2250 monitor (default resolution
1920x1080) but with maximum resolution 1440x900. There is no 1920x1080
resolution present at Monitor Preferences in Gnome.
I have tried the following:
------------------------------
linux-wgiv:~ # cvt 1920 1080 60
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120
-hsync +vsync
linux-wgiv:~ # xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576
1080 1083 1088 1120 -hsync +vsync
linux-wgiv:~ # xrandr --addmode DP1 1920x1080_60.00
linux-wgiv:~ # xrandr --output DP1 --mode 1920x1080_60.00
xrandr: Configure crtc 0 failed
-------------------------------------------------------------
But as you can see, I cannot use newly added resolution.
I have following in /var/log/messages:
Aug 3 19:16:38 linux-wgiv kernel: [ 1458.274802]
[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:3]
And following in X:
..
[ 20.946] (II) intel(0): EDID for output DP1
[ 20.947] (II) intel(0): Manufacturer: SAM Model: 523 Serial#: 1280455218
[ 20.947] (II) intel(0): Year: 2010 Week: 6
..
[ 20.947] (II) intel(0): Supported detailed timing:
[ 20.947] (II) intel(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 20.947] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052
h_blank_end 2200 h_border: 0
[ 20.947] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089
v_blanking: 1125 v_border: 0
[ 20.947] (II) intel(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81
kHz, PixClock max 175 MHz
..
[ 20.947] (II) intel(0): Printing probed modes for output DP1
[ 20.947] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 20.947] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672
1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 20.947] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 20.947] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480
1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 20.947] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 20.947] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 20.947] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 20.947] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
So looks like the driver gets info about 1920x1080 resolution, but does not
probing it.
P.S.: Sorry if I shouldn't be posting here. I am new to bugzilla.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
