https://bugzilla.novell.com/show_bug.cgi?id=678540
https://bugzilla.novell.com/show_bug.cgi?id=678540#c8
--- Comment #8 from Brandon Philips
I can confirm this bug.
Upgraded from 11.3 to 11.4. My config is little different:
ifcfg-eth1
BOOTPROTO='none' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='' MTU='' NAME='82574L Gigabit Network Connection'
ifcfg-vlan11
BOOTPROTO='none' BROADCAST='' ETHERDEVICE='eth1' ETHTOOL_OPTIONS='' IPADDR='' STARTMODE='auto'
ifcfg-xenbr1
BOOTPROTO='static' BRIDGE='yes' BRIDGE_FORWARDDELAY='0' BRIDGE_PORTS='eth1' BRIDGE_STP='off' IPADDR='10.1.1.5/24' REMOTE_IPADDR='' STARTMODE='auto'
ifcfg-xenbr11
BOOTPROTO='static' BRIDGE='yes' BRIDGE_FORWARDDELAY='0' BRIDGE_PORTS='vlan11' BRIDGE_STP='off' IPADDR='10.1.81.11' STARTMODE='auto'
Igor- Putting a VLAN and a bridge on the same physical device doesn't make sense and was broken, with good reason, in 2.6.37[1]. I would recommend that you create a bridge device and then hang the vlan off of that. If that doesn't work please file a new bug as your setup is slightly different than Marius's. [1] http://thread.gmane.org/gmane.linux.network/149864 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.