http://bugzilla.novell.com/show_bug.cgi?id=551641
User henk.vanvelden@xs4all.nl added comment
http://bugzilla.novell.com/show_bug.cgi?id=551641#c3
--- Comment #3 from Henk van Velden 2009-11-02 03:54:19 MST ---
The conclusion that the kernel sees a Transmeta CPU is completely wrong!
This makes also the title of this bug bogus. It should read:
"Only one of two CPU kernels initialized".
I also started a bug at bugzilla.kernel.org: 14525
Below is the COMPLETTE dmesg:
[ 0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc
version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT
2009-10-26 15:49:03 +0100
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fedf800 (usable)
[ 0.000000] BIOS-e820: 000000003fedf800 - 000000003fee0000 (reserved)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x3fedf max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fedf800 (usable)
[ 0.000000] modified: 000000003fedf800 - 000000003fee0000 (reserved)
[ 0.000000] modified: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[ 0.000000] modified: 000000003fee3000 - 000000003fef0000 (ACPI data)
[ 0.000000] modified: 000000003fef0000 - 000000003ff00000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0036e00000 page 2M
[ 0.000000] 0036e00000 - 0036ffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 10000-1b000
[ 0.000000] RAMDISK: 378c7000 - 37fef30a
[ 0.000000] Allocated new RAMDISK: 00af7000 - 0121f30a
[ 0.000000] Move RAMDISK from 00000000378c7000 - 0000000037fef309 to
00af7000 - 0121f309
[ 0.000000] ACPI: RSDP 000f7fe0 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 3fee30c0 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD
00000000)
[ 0.000000] ACPI: FACP 3fee7940 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD
00000000)
[ 0.000000] ACPI: DSDT 3fee3280 04671 (v01 HPQOEM SLIC-CPC 00001000 MSFT
03000000)
[ 0.000000] ACPI: FACS 3fee0000 00040
[ 0.000000] ACPI: SLIC 3fee7b80 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD
00000000)
[ 0.000000] ACPI: HPET 3fee7d40 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD
00000098)
[ 0.000000] ACPI: MCFG 3fee7dc0 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD
00000000)
[ 0.000000] ACPI: APIC 3fee7a80 00084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD
00000000)
[ 0.000000] ACPI: SSDT 3fee8320 00304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD
00000000)
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fedf
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000
2c000 30000 34000 38000 3c000
[ 0.000000] node 0 pfn: [0 - 3fedf]
[ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3f600
[ 0.000000] remove_active_range (0, 259584, 261632)
[ 0.000000] Reserving total of 800 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 36ffe
[ 0.000000] max_pfn = 3fedf
[ 0.000000] 142MB HIGHMEM available.
[ 0.000000] 879MB LOWMEM available.
[ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe
[ 0.000000] Low memory ends at vaddr f6ffe000
[ 0.000000] node 0 will remap to vaddr f6600000 - f6e00000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6600000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f6600000 to pfn 0003f600
[ 0.000000] remap_numa_kva: f6800000 to pfn 0003f800
[ 0.000000] remap_numa_kva: f6a00000 to pfn 0003fa00
[ 0.000000] remap_numa_kva: f6c00000 to pfn 0003fc00
[ 0.000000] High memory starts at vaddr f6ffe000
[ 0.000000] mapped low ram: 0 - 36ffe000
[ 0.000000] low ram: 0 - 36ffe000
[ 0.000000] node 0 low ram: 00000000 - 36ffe000
[ 0.000000] node 0 bootmap 00018000 - 0001ee00
[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000200000 - 0000aeda90] TEXT DATA BSS ==> [0000200000
- 0000aeda90]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000
- 0000100000]
[ 0.000000] #5 [0000aee000 - 0000af65e4] BRK ==> [0000aee000
- 0000af65e4]
[ 0.000000] #6 [0000010000 - 0000018000] PGTABLE ==> [0000010000
- 0000018000]
[ 0.000000] #7 [0000af7000 - 000121f30a] NEW RAMDISK ==> [0000af7000
- 000121f30a]
[ 0.000000] #8 [003f600000 - 003fe00000] KVA RAM
[ 0.000000] #9 [0036600000 - 0036e00000] KVA PG ==> [0036600000
- 0036e00000]
[ 0.000000] #10 [0000018000 - 000001f000] BOOTMAP ==> [0000018000
- 000001f000]
[ 0.000000] found SMP MP-table at [c00f5c10] f5c10
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00036ffe
[ 0.000000] HighMem 0x00036ffe -> 0x0003fedf
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f600
[ 0.000000] 0: 0x0003fe00 -> 0x0003fedf
[ 0.000000] On node 0 totalpages: 259694
[ 0.000000] free_area_init_node: node 0, pgdat f6600000, node_mem_map
c1220200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 219454 pages, LIFO batch:31
[ 0.000000] HighMem zone: 286 pages used for memmap
[ 0.000000] HighMem zone: 34243 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #4 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap:
3ff00000:b0100000)
[ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8
[ 0.000000] PERCPU: Embedded 14 pages at c1a25000, static data 34204 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 257648
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line:
root=/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part5 nolapic
resume=/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part1
splash=silent quiet vga=0x31a
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00036ffe:0003fedf)
[ 0.000000] Memory: 1004908k/1047420k available (4719k kernel code, 33868k
reserved, 2944k data, 464k init, 138116k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)
[ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB)
[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
[ 0.000000] .init : 0xc097d000 - 0xc09f1000 ( 464 kB)
[ 0.000000] .data : 0xc069bd42 - 0xc097c008 (2944 kB)
[ 0.000000] .text : 0xc0200000 - 0xc069bd42 (4719 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.444 MHz processor.
[ 0.000115] Console: colour dummy device 80x25
[ 0.000120] console [tty0] enabled
[ 0.000343] hpet clockevent registered
[ 0.000348] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000353] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3200.88 BogoMIPS (lpj=1600444)
[ 0.031296] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI,
All Rights Reserved
[ 0.031402] Security Framework initialized
[ 0.031421] AppArmor: AppArmor initialized
[ 0.031448] Mount-cache hash table entries: 512
[ 0.031624] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.031628] CPU: L2 cache: 1024K
[ 0.031632] CPU: Physical Processor ID: 0
[ 0.031634] CPU: Processor Core ID: 0
[ 0.031639] mce: CPU supports 6 MCE banks
[ 0.031649] CPU0: Thermal monitoring enabled (TM2)
[ 0.031654] using mwait in idle threads.
[ 0.031660] Performance Counters: Core2 events, Intel PMU driver.
[ 0.031667] ... version: 2
[ 0.031669] ... bit width: 40
[ 0.031672] ... generic counters: 2
[ 0.031674] ... value mask: 000000ffffffffff
[ 0.031677] ... max period: 000000007fffffff
[ 0.031680] ... fixed-purpose counters: 3
[ 0.031682] ... counter mask: 0000000700000003
[ 0.031688] Checking 'hlt' instruction... OK.
[ 0.036566] ACPI: Core revision 20090521
[ 0.048671] ACPI: setting ELCR to 0200 (from 0ca8)
[ 0.049087] SMP disabled
[ 0.049093] Mapping cpu 0 to node 0
[ 0.050040] Brought up 1 CPUs
[ 0.050045] Total of 1 processors activated (3200.88 BogoMIPS).
[ 0.050090] CPU0 attaching NULL sched-domain.
[ 0.052018] devtmpfs: initialized
[ 0.052215] Booting paravirtualized kernel on bare hardware
[ 0.052501] regulator: core version 0.5
[ 0.052530] Time: 9:17:51 Date: 11/02/09
[ 0.052614] NET: Registered protocol family 16
[ 0.052801] ACPI: bus type pci registered
[ 0.052897] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.052901] PCI: MCFG area at f0000000 reserved in E820
[ 0.052904] PCI: Using MMCONFIG for extended config space
[ 0.052907] PCI: Using configuration type 1 for base access
[ 0.055105] bio: create slab <bio-0> at 0
[ 0.057514] ACPI: EC: Look up EC in DSDT
[ 0.070162] ACPI: Interpreter enabled
[ 0.070173] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.070225] ACPI: Using PIC for interrupt routing
[ 0.080232] ACPI: No dock devices found.
[ 0.080406] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.080568] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.080573] pci 0000:00:01.0: PME# disabled
[ 0.080656] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.080709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.080714] pci 0000:00:1b.0: PME# disabled
[ 0.080768] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f]
[ 0.080829] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f]
[ 0.080888] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f]
[ 0.080949] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f]
[ 0.081019] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.081076] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.081082] pci 0000:00:1d.7: PME# disabled
[ 0.081280] pci 0000:00:1f.2: reg 10 io port: [0xfb00-0xfb07]
[ 0.081288] pci 0000:00:1f.2: reg 14 io port: [0xfa00-0xfa03]
[ 0.081296] pci 0000:00:1f.2: reg 18 io port: [0xf900-0xf907]
[ 0.081304] pci 0000:00:1f.2: reg 1c io port: [0xf800-0xf803]
[ 0.081312] pci 0000:00:1f.2: reg 20 io port: [0xf700-0xf70f]
[ 0.081320] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.081352] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.081357] pci 0000:00:1f.2: PME# disabled
[ 0.081413] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.081482] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.081494] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[ 0.081505] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
[ 0.081517] pci 0000:01:00.0: reg 30 32bit mmio: [0xfcfe0000-0xfcffffff]
[ 0.081562] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.081636] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
[ 0.081643] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xe0000000-0xefffffff]
[ 0.081693] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff]
[ 0.081761] pci 0000:02:01.0: supports D1 D2
[ 0.081764] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.081770] pci 0000:02:01.0: PME# disabled
[ 0.081823] pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff]
[ 0.081892] pci 0000:02:04.0: supports D1 D2
[ 0.081945] pci 0000:02:08.0: reg 10 32bit mmio: [0xfdefd000-0xfdefdfff]
[ 0.081955] pci 0000:02:08.0: reg 14 io port: [0xef00-0xef3f]
[ 0.082030] pci 0000:02:08.0: supports D1 D2
[ 0.082033] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082039] pci 0000:02:08.0: PME# disabled
[ 0.082089] pci 0000:00:1e.0: transparent bridge
[ 0.082094] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.082100] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.082123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.083296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.106093] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.107062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15)
*0, disabled.
[ 0.107253] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.107425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.107597] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.108042] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15)
*0, disabled.
[ 0.108215] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15)
*0, disabled.
[ 0.108388] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 0.108696] SCSI subsystem initialized
[ 0.108776] libata version 3.00 loaded.
[ 0.108886] usbcore: registered new interface driver usbfs
[ 0.108913] usbcore: registered new interface driver hub
[ 0.108949] usbcore: registered new device driver usb
[ 0.109064] PCI: Using ACPI for IRQ routing
[ 0.109277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.109286] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.115496] AppArmor: AppArmor Filesystem Enabled
[ 0.115520] pnp: PnP ACPI init
[ 0.115543] ACPI: bus type pnp registered
[ 0.119423] pnp: PnP ACPI: found 11 devices
[ 0.119428] ACPI: ACPI bus type pnp unregistered
[ 0.119446] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.119450] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.119455] system 00:01: ioport range 0x294-0x297 has been reserved
[ 0.119459] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.119471] system 00:07: ioport range 0x400-0x4bf has been reserved
[ 0.119481] system 00:09: iomem range 0xf0000000-0xf3ffffff has been
reserved
[ 0.119490] system 00:0a: iomem range 0xce200-0xcffff has been reserved
[ 0.119494] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.119499] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.119503] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.119507] system 00:0a: iomem range 0xfed00000-0xfed000ff has been
reserved
[ 0.119512] system 00:0a: iomem range 0x3fee0000-0x3fefffff could not be
reserved
[ 0.119516] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.119521] system 00:0a: iomem range 0x100000-0x3fedffff could not be
reserved
[ 0.119525] system 00:0a: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.119530] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.119534] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been
reserved
[ 0.119538] system 00:0a: iomem range 0xfff00000-0xffffffff has been
reserved
[ 0.119543] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[ 0.156969] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.156973] pci 0000:00:01.0: IO window: disabled
[ 0.157725] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff
[ 0.158025] pci 0000:00:01.0: PREFETCH window:
0x000000e0000000-0x000000efffffff
[ 0.158035] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.158040] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.158047] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff
[ 0.158052] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.158315] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 0.158320] PCI: setting IRQ 5 as level-triggered
[ 0.158326] pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low)
-> IRQ 5
[ 0.158333] pci 0000:00:01.0: setting latency timer to 64
[ 0.158343] pci 0000:00:1e.0: setting latency timer to 64
[ 0.158350] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.158354] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.158358] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff]
[ 0.158362] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.158366] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.158370] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.158373] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.158377] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.158470] NET: Registered protocol family 2
[ 0.158615] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.159068] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.159545] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.159975] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.159980] TCP reno registered
[ 0.160186] NET: Registered protocol family 1
[ 0.160284] Unpacking initramfs...
[ 0.422895] Freeing initrd memory: 7328k freed
[ 0.428155] Scanning for low memory corruption every 60 seconds
[ 0.428383] audit: initializing netlink socket (disabled)
[ 0.428414] type=2000 audit(1257153471.427:1): initialized
[ 0.434707] highmem bounce pool size: 64 pages
[ 0.434715] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.435758] VFS: Disk quotas dquot_6.5.2
[ 0.435827] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.436029] msgmni has been set to 426
[ 0.436166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.436171] io scheduler noop registered
[ 0.436174] io scheduler anticipatory registered
[ 0.436177] io scheduler deadline registered
[ 0.436194] io scheduler cfq registered (default)
[ 0.436399] pci 0000:01:00.0: Boot video device
[ 0.436419] pci 0000:02:08.0: Firmware left e100 interrupts enabled;
disabling
[ 0.436816] alloc irq_desc for 24 on node 0
[ 0.436821] alloc kstat_irqs on node 0
[ 0.436833] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.437003] pci-stub: invalid id string ""
[ 0.437175] vesafb: framebuffer at 0xe0000000, mapped to 0xf7880000, using
5120k, total 65536k
[ 0.437180] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[ 0.437183] vesafb: protected mode interface info at c000:c6e0
[ 0.437186] vesafb: pmi: set display start = c00cc716, set palette =
c00cc780
[ 0.437189] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9
3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 0.437214] vesafb: scrolling: redraw
[ 0.437218] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.437426] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.459279] bootsplash: silentjpeg size 130564 bytes
[ 0.491753] bootsplash: ...found (1280x1024, 29083 bytes, v3).
[ 0.500739] Switched to high resolution mode on CPU 0
[ 0.579817] Console: switching to colour frame buffer device 156x60
[ 0.667318] fb0: VESA VGA frame buffer device
[ 0.669624] Non-volatile memory driver v1.3
[ 0.669629] Linux agpgart interface v0.103
[ 0.669673] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.670459] ahci 0000:00:1f.2: version 3.0
[ 0.670689] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.670693] PCI: setting IRQ 11 as level-triggered
[ 0.670700] ahci 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level,
low) -> IRQ 11
[ 0.670811] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 0.670816] ahci 0000:00:1f.2: flags: 64bit ncq ilck led clo
[ 0.670822] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.671150] scsi0 : ahci
[ 0.671286] scsi1 : ahci
[ 0.671369] scsi2 : ahci
[ 0.671440] scsi3 : ahci
[ 0.671631] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100
irq 11
[ 0.671636] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180
irq 11
[ 0.671640] ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status
changed irq 11
[ 0.671644] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280
irq 11
[ 0.671783] Fixed MDIO Bus: probed
[ 0.671792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.672335] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7
[ 0.672341] PCI: setting IRQ 7 as level-triggered
[ 0.672349] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNK1] -> GSI 7 (level,
low) -> IRQ 7
[ 0.672376] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.672382] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.672444] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 0.676358] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.676369] ehci_hcd 0000:00:1d.7: irq 7, io mem 0xfdfff000
[ 0.686028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.686086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.686091] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.686096] usb usb1: Product: EHCI Host Controller
[ 0.686100] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
[ 0.686105] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.686252] usb usb1: configuration #1 chosen from 1 choice
[ 0.686296] hub 1-0:1.0: USB hub found
[ 0.686306] hub 1-0:1.0: 8 ports detected
[ 0.686407] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.686429] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.687039] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNK1] -> GSI 7 (level,
low) -> IRQ 7
[ 0.687054] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.687060] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.687076] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 0.687107] uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000ff00
[ 0.687171] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.687176] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.687181] usb usb2: Product: UHCI Host Controller
[ 0.687185] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.687189] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.687300] usb usb2: configuration #1 chosen from 1 choice
[ 0.687341] hub 2-0:1.0: USB hub found
[ 0.687351] hub 2-0:1.0: 2 ports detected
[ 0.688041] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level,
low) -> IRQ 11
[ 0.688051] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.688057] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.688073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 0.688103] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000fe00
[ 0.688156] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.688161] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.688165] usb usb3: Product: UHCI Host Controller
[ 0.688169] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.688174] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.688284] usb usb3: configuration #1 chosen from 1 choice
[ 0.688326] hub 3-0:1.0: USB hub found
[ 0.688335] hub 3-0:1.0: 2 ports detected
[ 0.689303] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
[ 0.689307] PCI: setting IRQ 3 as level-triggered
[ 0.689314] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 3 (level,
low) -> IRQ 3
[ 0.689322] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.689327] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.689345] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 0.689373] uhci_hcd 0000:00:1d.2: irq 3, io base 0x0000fd00
[ 0.689418] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.689421] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.689425] usb usb4: Product: UHCI Host Controller
[ 0.689428] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.689431] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.689532] usb usb4: configuration #1 chosen from 1 choice
[ 0.689573] hub 4-0:1.0: USB hub found
[ 0.689582] hub 4-0:1.0: 2 ports detected
[ 0.690045] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 5 (level,
low) -> IRQ 5
[ 0.690055] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.690061] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.690077] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 0.690109] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000fc00
[ 0.690161] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.690166] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.690171] usb usb5: Product: UHCI Host Controller
[ 0.690175] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
[ 0.690179] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.690288] usb usb5: configuration #1 chosen from 1 choice
[ 0.690329] hub 5-0:1.0: USB hub found
[ 0.690338] hub 5-0:1.0: 2 ports detected
[ 0.690418] Initializing USB Mass Storage driver...
[ 0.690461] usbcore: registered new interface driver usb-storage
[ 0.690465] USB Mass Storage support registered.
[ 0.690504] usbcore: registered new interface driver libusual
[ 0.690522] usbcore: registered new interface driver ums-alauda
[ 0.690540] usbcore: registered new interface driver ums-cypress
[ 0.690557] usbcore: registered new interface driver ums-datafab
[ 0.690574] usbcore: registered new interface driver ums-freecom
[ 0.690591] usbcore: registered new interface driver ums-isd200
[ 0.690607] usbcore: registered new interface driver ums-jumpshot
[ 0.690632] usbcore: registered new interface driver ums-karma
[ 0.690651] usbcore: registered new interface driver ums-onetouch
[ 0.690668] usbcore: registered new interface driver ums-sddr09
[ 0.690686] usbcore: registered new interface driver ums-sddr55
[ 0.690703] usbcore: registered new interface driver ums-usbat
[ 0.690778] PNP: No PS/2 controller found. Probing ports directly.
[ 0.691144] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.691152] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.691235] mice: PS/2 mouse device common for all mice
[ 0.691388] rtc_cmos 00:04: RTC can wake from S4
[ 0.691449] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.691471] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.691489] cpuidle: using governor ladder
[ 0.691492] cpuidle: using governor menu
[ 0.691873] usbcore: registered new interface driver hiddev
[ 0.691896] usbcore: registered new interface driver usbhid
[ 0.691900] usbhid: v2.6:USB HID core driver
[ 0.778978] TCP cubic registered
[ 0.779066] NET: Registered protocol family 10
[ 0.779706] lo: Disabled Privacy Extensions
[ 0.780238] lib80211: common routines for IEEE802.11 drivers
[ 0.780242] lib80211_crypt: registered algorithm 'NULL'
[ 0.780261] Using IPI No-Shortcut mode
[ 0.780375] PM: Checking image partition
/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part1
[ 0.976040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.976064] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.976094] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.976781] ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA7BA, max UDMA/133
[ 0.976787] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.977786] ata1.00: configured for UDMA/133
[ 0.977961] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O
PQ: 0 ANSI: 5
[ 0.978226] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298
GiB)
[ 0.978294] sd 0:0:0:0: [sda] Write Protect is off
[ 0.978298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.978334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 0.978513] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.029594] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.243029] usb 1-5: new high speed USB device using ehci_hcd and address 5
[ 1.394032] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.397127] ata3.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33,
ATAPI AN
[ 1.397154] ata3.00: applying bridge limits
[ 1.400795] ata3.00: configured for UDMA/33
[ 1.402677] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514
PQ: 0 ANSI: 5
[ 1.402874] PM: Resume from disk failed.
[ 1.402897] registered taskstats version 1
[ 1.403044] Magic number: 1:851:271
[ 1.403114] rtc_cmos 00:04: setting system clock to 2009-11-02 09:18:01 UTC
(1257153481)
[ 1.403248] Freeing unused kernel memory: 464k freed
[ 1.403476] Write protecting the kernel text: 4720k
[ 1.403639] Write protecting the kernel read-only data: 2704k
[ 1.454611] ACPI: SSDT 3fee7e40 00175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD
00000000)
[ 1.455061] processor LNXCPU:00: registered as cooling_device0
[ 1.460360] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.460382] ACPI: Thermal Zone [THRM] (40 C)
[ 1.463615] fan PNP0C0B:00: registered as cooling_device1
[ 1.463623] ACPI: Fan [FAN] (on)
[ 1.471150] udev: starting version 146
[ 1.520971] usb 1-5: New USB device found, idVendor=15a9, idProduct=0004
[ 1.520976] usb 1-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.520981] usb 1-5: Product: 802.11 bg WLAN
[ 1.520984] usb 1-5: Manufacturer: Ralink
[ 1.521136] usb 1-5: configuration #1 chosen from 1 choice
[ 1.623042] usb 1-8: new high speed USB device using ehci_hcd and address 6
[ 1.755850] usb 1-8: New USB device found, idVendor=0bda, idProduct=0111
[ 1.755858] usb 1-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.755863] usb 1-8: Product: USB2.0-CRW
[ 1.755867] usb 1-8: Manufacturer: Generic
[ 1.755871] usb 1-8: SerialNumber: 20021111153705700
[ 1.756059] usb 1-8: configuration #1 chosen from 1 choice
[ 1.757796] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.758219] usb-storage: device found at 6
[ 1.758222] usb-storage: waiting for device to settle before scanning
[ 1.881989] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 1.881997] PM: Basic memory bitmaps created
[ 1.895868] PM: Basic memory bitmaps freed
[ 1.957001] PM: Starting manual resume from disk
[ 1.957037] PM: Resume from partition 8:1
[ 1.957040] PM: Checking hibernation image.
[ 1.957211] PM: Resume from disk failed.
[ 1.964049] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.151227] usb 2-1: New USB device found, idVendor=03f0, idProduct=7e04
[ 2.151234] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.151239] usb 2-1: Product: Deskjet F4100 series
[ 2.151243] usb 2-1: Manufacturer: HP
[ 2.151247] usb 2-1: SerialNumber: CN7592H1KH04TJ
[ 2.151400] usb 2-1: configuration #1 chosen from 1 choice
[ 2.331856] kjournald starting. Commit interval 15 seconds
[ 2.343742] EXT3 FS on sda5, internal journal
[ 2.343751] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.360040] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 2.527232] usb 3-1: New USB device found, idVendor=03f0, idProduct=0f0c
[ 2.527239] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.527244] usb 3-1: Product: USB Multimedia Cordless Kit
[ 2.527248] usb 3-1: Manufacturer: BTC
[ 2.527403] usb 3-1: configuration #1 chosen from 1 choice
[ 2.545617] input: BTC USB Multimedia Cordless Kit as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input0
[ 2.545710] generic-usb 0003:03F0:0F0C.0001: input,hidraw0: USB HID v1.11
Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.1-1/input0
[ 2.581875] input: BTC USB Multimedia Cordless Kit as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input1
[ 2.582073] generic-usb 0003:03F0:0F0C.0002: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.1-1/input1
[ 2.764680] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00
PQ: 0 ANSI: 0 CCS
[ 2.771434] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00
PQ: 0 ANSI: 0 CCS
[ 2.778934] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00
PQ: 0 ANSI: 0 CCS
[ 2.780653] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.787305] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00
PQ: 0 ANSI: 0 CCS
[ 2.788043] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 2.789973] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 2.790774] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 2.791932] usb-storage: device scan complete
[ 2.791964] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 2.940247] usb 3-2: New USB device found, idVendor=0c45, idProduct=182e
[ 2.940253] usb 3-2: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 2.940259] usb 3-2: Product: USB Headset
[ 2.940263] usb 3-2: Manufacturer: GENERIC
[ 2.940398] usb 3-2: configuration #1 chosen from 1 choice
[ 2.947329] input: GENERIC USB Headset as
/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.3/input/input2
[ 2.947456] generic-usb 0003:0C45:182E.0003: input,hidraw2: USB HID v1.00
Device [GENERIC USB Headset] on usb-0000:00:1d.1-2/input3
[ 4.114162] udev: starting version 146
[ 4.208062] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.208125] ACPI: Power Button [PWRF]
[ 4.208204] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 4.208240] ACPI: Power Button [PWRB]
[ 4.334879] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.334924] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 4.334972] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.335033] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 4.335076] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 4.335118] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 4.513155] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.513160] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.514503] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 4.514508] PCI: setting IRQ 10 as level-triggered
[ 4.514515] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 10 (level,
low) -> IRQ 10
[ 4.526029] iTCO_vendor_support: vendor-support=0
[ 4.532303] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 4.532309] Uniform CD-ROM driver Revision: 3.20
[ 4.532461] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.553987] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.564441] e100 0000:02:08.0: PME# disabled
[ 4.565516] e100: eth0: e100_probe: addr 0xfdefd000, irq 10, MAC addr
00:1b:fc:7f:c1:ef
[ 5.472640] nvidia: module license 'NVIDIA' taints kernel.
[ 5.472647] Disabling lock debugging due to kernel taint
[ 5.509543] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 5.509647] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
[ 5.509722] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.697440] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 5.775052] ohci1394 0000:02:01.0: PCI INT A -> Link[LNKE] -> GSI 10 (level,
low) -> IRQ 10
[ 5.777701] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level,
low) -> IRQ 5
[ 5.777711] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.778206] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug
14 17:18:04 PDT 2009
[ 5.826066] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]
MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
[ 5.829601] cfg80211: Calling CRDA to update world regulatory domain
[ 6.285321] Linux video capture interface: v2.00
[ 6.600729] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 5 (level,
low) -> IRQ 5
[ 6.600767] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.692702] usbcore: registered new interface driver snd-usb-audio
[ 6.826982] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 6.835073] saa7134 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 5 (level,
low) -> IRQ 5
[ 6.835085] saa7133[0]: found at 0000:02:04.0, rev: 209, irq: 5, latency:
32, mmio: 0xfdefe000
[ 6.835094] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871
[card=111,autodetected]
[ 6.835132] saa7133[0]: board init: gpio is 0
[ 6.835145] IRQ 5/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 6.841280] hda_codec: ALC888: BIOS auto-probing.
[ 6.841288] ALSA
/usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3881:
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
[ 6.841295] ALSA
/usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3885:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.841301] ALSA
/usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3889:
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.841318] ALSA
/usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3890:
mono: mono_out=0x0
[ 6.841323] ALSA
/usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3893:
dig-out=0x1e/0x0
[ 6.841338] ALSA
/usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3901:
inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x0, aux=0x0
[ 6.842298] ALSA
/usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1282:
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[ 6.842304] ALSA
/usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1357:
realtek: Enable default setup for auto mode as fallback
[ 6.842396] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 6.983027] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c
55 d2 b2 92
[ 6.983053] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff
ff ff ff ff
[ 6.983076] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf
ff ff ff ff
[ 6.983099] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983123] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff
ff ff ff ff
[ 6.983146] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983169] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983192] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983215] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983243] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983260] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983278] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983295] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983312] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983329] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983346] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.983366] i2c-adapter i2c-1: Invalid 7-bit address 0x7a
[ 7.017513] usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid
0x03F0 pid 0x7E04
[ 7.017553] usbcore: registered new interface driver usblp
[ 7.085234] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000151d97a]
[ 7.348160] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[ 7.383465] tda829x 1-004b: setting tuner address to 61
[ 7.447021] tda829x 1-004b: type set to tda8290+75a
[ 7.697299] phy0: Selected rate control algorithm 'minstrel'
[ 7.698340] Registered led device: rt73usb-phy0::radio
[ 7.698364] Registered led device: rt73usb-phy0::assoc
[ 7.698386] Registered led device: rt73usb-phy0::quality
[ 7.698877] usbcore: registered new interface driver rt73usb
[ 10.146211] saa7133[0]: registered device video0 [v4l2]
[ 10.146302] saa7133[0]: registered device vbi0
[ 10.275642] dvb_init() allocating 1 frontend
[ 10.308164] DVB: registering new adapter (saa7133[0])
[ 10.308171] DVB: registering adapter 0 frontend 0 (Philips TDA10046H
DVB-T)...
[ 10.344025] tda1004x: setting up plls for 48MHz sampling clock
[ 12.518025] tda1004x: timeout waiting for DSP ready
[ 12.528024] tda1004x: found firmware revision 0 -- invalid
[ 12.528028] tda1004x: trying to boot from eeprom
[ 14.835026] tda1004x: timeout waiting for DSP ready
[ 14.845024] tda1004x: found firmware revision 0 -- invalid
[ 14.845028] tda1004x: waiting for firmware upload...
[ 14.845036] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10046.fw
[ 14.888919] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10045.fw
[ 14.902980] tda1004x: no firmware upload (timeout or file not found?)
[ 14.902998] tda1004x: firmware upload failed
[ 15.035600] saa7134 ALSA driver for DMA sound loaded
[ 15.035616] IRQ 5/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 15.035646] saa7133[0]/alsa: saa7133[0] at 0xfdefe000 irq 5 registered as
card -1
[ 15.114686] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1
across:2104472k
[ 15.682505] device-mapper: uevent: version 1.0.3
[ 15.683134] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 15.990096] loop: module loaded
[ 16.016820] kjournald starting. Commit interval 15 seconds
[ 16.016837] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.053433] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.056215] kjournald starting. Commit interval 15 seconds
[ 16.278252] fuse init (API version 7.12)
[ 18.967337] powernow: This module only works with AMD K7 CPUs
[ 19.577956] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.704172] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 21.704490] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.221026] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 28.437467] bootsplash: status on console 0 changed to on
[ 32.215017] eth0: no IPv6 routers present
[ 39.186601] CPU0 attaching NULL sched-domain.
[ 39.186677] CPU0 attaching NULL sched-domain.
It shows that two CPUs are found initialy, but that only one is initialized.
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
