Mailinglist Archive: opensuse-bugs (12990 mails)

< Previous Next >
[Bug 467463] UMTS/HSDPA needs to connect then disconnect using wvdial first before connecting with NetworkManager
  • From: bugzilla_noreply@xxxxxxxxxx
  • Date: Mon, 19 Jan 2009 19:11:20 -0700 (MST)
  • Message-id: <20090120021120.40979CC7CD@xxxxxxxxxxxxxxxxxxxxxx>
https://bugzilla.novell.com/show_bug.cgi?id=467463

User ronartos@xxxxxxxxx added comment
https://bugzilla.novell.com/show_bug.cgi?id=467463#c2





--- Comment #2 from ronald artos <ronartos@xxxxxxxxx> 2009-01-19 19:11:16 MST
---
and someone requested to do this and attached the output

NM_SERIAL_DEBUG=1 NetworkManager --no-daemon 2>&1 | tee /tmp/nm-serial.txt


Here's the output:


NetworkManager: <info> /dev/ttyUSB0: driver is 'option'.
NetworkManager: <info> Found new GSM modem device '/dev/ttyUSB0'.
NetworkManager: <info> (/dev/ttyUSB0): exported as
/org/freedesktop/Hal/devices/usb_device_19d2_1_noserial_if0_serial_usb_0
NetworkManager: <info> eth0: driver is 'tg3'.
NetworkManager: <info> Found new Ethernet device 'eth0'.
NetworkManager: <info> (eth0): exported as
/org/freedesktop/Hal/devices/net_00_1e_ec_0e_b9_95
NetworkManager: <info> wlan0: driver is 'b43-pci-bridge'.
NetworkManager: <info> wlan0: driver supports SSID scans (scan_capa 0x01).
NetworkManager: <info> Found new 802.11 WiFi device 'wlan0'.
NetworkManager: <info> (wlan0): exported as
/org/freedesktop/Hal/devices/net_00_21_00_19_9b_6f
NetworkManager: <info> (/dev/ttyUSB0): device state change: 1 -> 2
NetworkManager: <info> (/dev/ttyUSB0): deactivating device (reason: 2).
NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion
`iface_idx >= 0' failed
NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion
`iface_idx >= 0' failed
NetworkManager: <info> (eth0): device state change: 1 -> 2
NetworkManager: <info> (eth0): bringing up device.
NetworkManager: <info> (eth0): preparing device.
NetworkManager: <info> (eth0): deactivating device (reason: 2).
NetworkManager: <info> (wlan0): device state change: 1 -> 2
NetworkManager: <info> (wlan0): bringing up device.
NetworkManager: <info> (wlan0): preparing device.
NetworkManager: <info> (wlan0): deactivating device (reason: 2).
NetworkManager: <info> (/dev/ttyUSB0): device state change: 2 -> 3
NetworkManager: <info> (wlan0): device state change: 2 -> 3
NetworkManager: <info> (wlan0): supplicant interface state: starting -> ready

--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

< Previous Next >
References