https://bugzilla.novell.com/show_bug.cgi?id=422049 Summary: kernel 2.6.25 fails to mount & read CF card using PCMCIA Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: tony@daylessday.org QAContact: qa@suse.de Found By: --- The latest kernel in openSUSE 11.0, 2.6.25.16-4-default fails to mount and read CF card through PCMCIA adapter. This worked fine with openSUSE 10.3 and it does work fine with kernel 2.6.27-rc4 from factory (though it has other problems which I'll report separately). dmesg output: ---------- pcmcia: registering new device pcmcia0.0 scsi2 : pata_pcmcia ata3: PATA max PIO0 cmd 0x7100 ctl 0x710e irq 16 ata3.00: CFA: SanDisk SDCFH-2048, HDX 3.07, max PIO4 ata3.00: 4001760 sectors, multi 0: LBA ata3.00: configured for PIO0 ata3.00: configured for PIO0 ata3: EH complete scsi 2:0:0:0: Direct-Access ATA SanDisk SDCFH-20 HDX PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 4001760 512-byte hardware sectors (2049 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 4001760 512-byte hardware sectors (2049 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg2 type 0 pcmcia: registering new device pcmcia0.1 0.1: GetNextTuple: No more items pata_pcmcia: probe of 0.1 failed with error -12 Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 0.1: GetNextTuple: No more items 0.1: GetNextTuple: No more items pata_pcmcia: probe of 0.1 failed with error -12 0.1: GetNextTuple: No more items 0.1: GetNextTuple: No more items pata_pcmcia: probe of 0.1 failed with error -12 0.1: GetNextTuple: No more items pccard: card ejected from slot 0 ata3.00: disabled sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 Buffer I/O error on device sdb, logical block 1 Buffer I/O error on device sdb, logical block 2 Buffer I/O error on device sdb, logical block 3 Buffer I/O error on device sdb, logical block 0 sd 2:0:0:0: [sdb] Stopping disk sd 2:0:0:0: [sdb] START_STOP FAILED sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.