https://bugzilla.novell.com/show_bug.cgi?id=373357
User infoman@imail.de added comment
https://bugzilla.novell.com/show_bug.cgi?id=373357#c10
--- Comment #10 from Ingo Schulz 2008-08-03 08:41:13 MDT ---
So, i executed the suggested tasks.
Here are my logs:
1. lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI
Express Root Port [8086:2591] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller [8086:2668] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 [8086:2658] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 [8086:2659] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 [8086:265a] (rev 03)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 [8086:265b] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller [8086:266f] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller [8086:266a] (rev 03)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M24 1P [Radeon
Mobility X600] [1002:3150]
02:01.0 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller
[104c:ac8e]
02:01.2 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI7x20 1394a-2000 OHCI
Two-Port PHY/Link-Layer Controller [104c:802e]
02:01.3 Mass storage controller [0180]: Texas Instruments PCI7420/7620 Combo
CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller [104c:ac8f]
02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG
Network Connection [8086:4220] (rev 05)
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet [10ec:8169] (rev 10)
2. hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: HTS541080G9SA00
Serial Number: MPBDL0X6JM9ZYM
Firmware Revision: MB4OC60D
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 1
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 156301488
LBA48 user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
Non-Zero buffer offsets in DMA Setup FIS
DMA Setup Auto-Activate optimization
* Device-initiated interface power management
In-order data delivery
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
52min for SECURITY ERASE UNIT.
Checksum: correct
3. /var/log/boot.msg
Inspecting /boot/System.map-2.6.25.5-1.1-default
Loaded 28387 symbols from /boot/System.map-2.6.25.5-1.1-default.
Symbols match kernel version 2.6.25.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1
20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP
2008-06-07 01:55:22 +0200
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
<4> BIOS-e820: 000000003ffc0000 - 000000003ffcf000 (ACPI data)
<4> BIOS-e820: 000000003ffcf000 - 0000000040000000 (ACPI NVS)
<4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<4> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
<4> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
<4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
<5>127MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>Scan SMP from c0000000 for 1024 bytes.
<6>Scan SMP from c009fc00 for 1024 bytes.
<6>Scan SMP from c00f0000 for 65536 bytes.
<6>found SMP MP-table at [c00ff780] 000ff780
<7>Entering add_active_range(0, 0, 262080) 0 entries of 256 used
<4>Zone PFN ranges:
<4> DMA 0 -> 4096
<4> Normal 4096 -> 229376
<4> HighMem 229376 -> 262080
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 262080
<7>On node 0 totalpages: 262080
<7> DMA zone: 32 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 4064 pages, LIFO batch:0
<7> Normal zone: 1760 pages used for memmap
<7> Normal zone: 223520 pages, LIFO batch:31
<7> HighMem zone: 255 pages used for memmap
<7> HighMem zone: 32449 pages, LIFO batch:7
<7> Movable zone: 0 pages used for memmap
<6>DMI 2.3 present.
<6>Using APIC driver default
<4>ACPI: RSDP 000F6910, 0014 (r0 SONY )
<4>ACPI: RSDT 3FFC0000, 0038 (r1 SONY F2 20051222 MSFT 97)
<4>ACPI: FACP 3FFC0200, 0084 (r2 SONY F2 20051222 MSFT 97)
<4>ACPI: DSDT 3FFC0470, 54A7 (r1 SONY F2 20051222 INTL 2002026)
<4>ACPI: FACS 3FFCF000, 0040
<4>ACPI: APIC 3FFC0390, 0054 (r1 SONY F2 20051222 MSFT 97)
<4>ACPI: MCFG 3FFC03F0, 003C (r1 SONY F2 20051222 MSFT 97)
<4>ACPI: OEMB 3FFCF040, 0040 (r1 SONY F2 20051222 MSFT 97)
<4>ACPI: SSDT 3FFC5920, 02B7 (r1 SONY F2 20051222 INTL 2002026)
<5>ACPI: DMI detected: Sony
<6>ACPI: PM-Timer IO Port: 0x808
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>Processor #0 6:13 APIC version 20
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
<6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
<6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260033
<5>Kernel command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl
ramdisk_size=512000 ramdisk_blocksize=4096 splash=silent vga=0x317
<6>bootsplash: silent mode.
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Detected 1729.066 MHz processor.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 1021508k/1048320k available (1945k kernel code, 26204k reserved,
1629k data, 256k init, 130816k highmem)
<6>virtual kernel memory layout:
<4> fixmap : 0xffdf2000 - 0xfffff000 (2100 kB)
<4> pkmap : 0xff400000 - 0xff800000 (4096 kB)
<4> vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
<4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
<4> .init : 0xc0485000 - 0xc04c5000 ( 256 kB)
<4> .data : 0xc02e64dd - 0xc047d96c (1629 kB)
<4> .text : 0xc0100000 - 0xc02e64dd (1945 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<4>Calibrating delay using timer specific routine.. 3461.46 BogoMIPS
(lpj=6922928)
<6>Security Framework initialized
<6>AppArmor: AppArmor initialized <NULL>
<6>AppArmor: Registered secondary security module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 512
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 18k freed
<6>ACPI: Core revision 20070126
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 872 Objects with 60 Devices 208 Methods 28 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 3 Methods 0 Regions
<4> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode
successful
<4>CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
<6>Total of 1 processors activated (3461.46 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>Brought up 1 CPUs
<7>CPU0 attaching sched-domain:
<7> domain 0: span 00000001
<7> groups: 00000001
<6>net_namespace: 548 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using MMCONFIG for extended config space
<6>PCI: Using configuration type 1
<6>Setting up standard PCI resources
<4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int
0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime
GPEs in this block
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package
initialization:.....................................................................................................................
<4>Initialized 27/28 Regions 23/23 Fields 44/45 Buffers 23/26 Packages (889
nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
<4>Executed 2 _INI methods requiring 1 _STA executions (examined 64 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: EC: non-query interrupt received, switching to interrupt mode
<6>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
<6>ACPI: EC: driver started in interrupt mode
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
<6>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
<6>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7)
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7)
<6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7)
<6>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7)
<4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 9B,
should be 93 [20070126]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 15 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
<7>hpet clockevent registered
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>hpet0: 3 64-bit timers, 14318180 Hz
<6>AppArmor: AppArmor Filesystem Enabled
<4>ACPI: RTC can wake from S4
<6>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:07: ioport range 0x800-0x87f has been reserved
<6>system 00:07: ioport range 0x480-0x4bf has been reserved
<6>system 00:07: ioport range 0xfe00-0xfe01 has been reserved
<6>system 00:07: iomem range 0xfed1c000-0xfed1ffff could not be reserved
<6>system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
<6>system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
<6>system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved
<6>system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
<6>system 00:0b: iomem range 0xff780000-0xffbfffff could not be reserved
<6>system 00:0b: iomem range 0xffb80000-0xffffffff could not be reserved
<6>system 00:0c: iomem range 0xffc00000-0xffb7ffff could not be reserved
<6>system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
<6>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
<6>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
<6>system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
<6>system 00:0e: iomem range 0x0-0x0 could not be reserved
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: 9000-bfff
<6> MEM window: 0xfe900000-0xfe9fffff
<6> PREFETCH window: 0x00000000cff00000-0x00000000dfefffff
<4>PCI: Bus 3, cardbus bridge: 0000:02:01.0
<6> IO window: 0x0000c000-0x0000c0ff
<6> IO window: 0x0000c400-0x0000c4ff
<6> PREFETCH window: 0x50000000-0x53ffffff
<6> MEM window: 0x58000000-0x5bffffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: c000-cfff
<6> MEM window: 0xfea00000-0xfeafffff
<6> PREFETCH window: 0x0000000050000000-0x0000000055ffffff
<6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>Unpacking initramfs...<7>Switched to high resolution mode on CPU 0
<4> done
<6>Freeing initrd memory: 12771k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1217765339.204:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>pci 0000:01:00.0: Boot video device
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:01.0:pcie00]
<7>Allocate Port Service[0000:00:01.0:pcie03]
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total
131008k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=84
<6>vesafb: protected mode interface info at c000:59c3
<6>vesafb: pmi: set display start = c00c5a31, set palette = c00c5a6b
<6>vesafb: pmi: ports = b010 b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 166113 bytes
<6>bootsplash: ...found (1024x768, 154167 bytes, v3).
<4>Console: switching to colour frame buffer device 124x44
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<4>floppy0: no floppy controllers found
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /devices/platform/pcspkr/input/input0
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 256k freed
<6>Write protecting the kernel read-only data: 1440k
<6>input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
<6>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2
<6>input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input3
<6>No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>ahci 0000:00:1f.2: version 3.0
<6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
<6>ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE
mode
<6>ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>scsi0 : ahci
<6>scsi1 : ahci
<6>scsi2 : ahci
<6>scsi3 : ahci
<6>ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 17
<6>ata2: DUMMY
<6>ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 17
<6>ata4: DUMMY
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata1.00: ATA-7: HTS541080G9SA00, MB4OC60D, max UDMA/100
<6>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (not used)
<6>ata1.00: configured for UDMA/100
<6>ata3: SATA link down (SStatus 0 SControl 300)
<5>scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5
<7>ata_piix 0000:00:1f.1: version 2.12
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
<6>scsi4 : ata_piix
<6>scsi5 : ata_piix
<6>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
<6>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
<6>ata5.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.11, max UDMA/33
<6>ata5.00: configured for UDMA/33
<5>scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.11 PQ: 0 ANSI: 5
<6>Uniform Multi-Platform E-IDE driver
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>Driver 'sr' needs updating - please use bus_type methods
<4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 4:0:0:0: Attached scsi CD-ROM sr0
<4>Driver 'sd' needs updating - please use bus_type methods
<5>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<5>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
<6> sda: sda1 sda2 < sda5 sda6 sda7 >
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>st: Version 20080221, fixed bufsize 32768, s/g segs 256
<4>Driver 'st' needs updating - please use bus_type methods
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sr 4:0:0:0: Attached scsi generic sg1 type 5
<6>brd: module loaded
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 8 ports detected
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.7
<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.0
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000dc00
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:1d.1
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 20 (level, low) -> IRQ 20
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e000
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb 1-1: new high speed USB device using ehci_hcd and address 2
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.2
<6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low) -> IRQ 21
<7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000e080
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>usb 1-1: New USB device found, idVendor=0bda, idProduct=8187
<6>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 1-1: Product: RTL8187_Wireless_LAN_Adapter
<6>usb 1-1: Manufacturer: Manufacturer_Realtek_RTL8187_
<6>usb 1-1: SerialNumber: 00C0CA1B3748
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.3
<6>Initializing USB Mass Storage driver...
<3>hub 1-0:1.0: unable to enumerate USB device on port 2
<3>hub 1-0:1.0: unable to enumerate USB device on port 8
<6>usb 2-2: new low speed USB device using uhci_hcd and address 2
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>usb 2-2: New USB device found, idVendor=046d, idProduct=c50a
<6>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-2: Product: USB Receiver
<6>usb 2-2: Manufacturer: Logitech
<6>usb 5-2: new full speed USB device using uhci_hcd and address 2
<6>usb 5-2: configuration #1 chosen from 1 choice
<6>usb 5-2: New USB device found, idVendor=044e, idProduct=300c
<6>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 5-2: Product: UGX
<6>usb 5-2: Manufacturer: ALPS
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<7>ISO 9660 Extensions: RRIP_1991A
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<7>ISO 9660 Extensions: RRIP_1991A
<6>loop: module loaded
<6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
<4>fuse init (API version 7.9)
<6>aufs 20080428
<4>aufs test_add:376:mount[1080]: uid/gid/perm /read-only 0/0/0755, 0/0/01777
<6>Bluetooth: Core ver 2.11
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>iTCO_vendor_support: vendor-support=0
<6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
<6>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
<6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>sony-laptop: Sony Programmable IO Control Driver v0.6.
<6>sony-laptop: detected Type3 model
<6>input: Sony Vaio Keys as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:09/SNY6001:00/input/input4
<6>input: Sony Vaio Jogdial as /devices/virtual/input/input5
<6>sony-laptop: device allocated minor is 60
<6>sony-laptop: Sony Notebook Control Driver v0.6.
<6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
<6>Linux agpgart interface v0.103
<3>intel_rng: FWH not detected
<6>input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
<6>ACPI: CPU0 (power states: C1[C1] C2[C2])
<6>ACPI: ACPI0007:00 is registered as cooling_device0
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<6>ACPI: Power Button (CM) [PWRB]
<6>ACPI: AC Adapter [ACAD] (on-line)
<6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
<6>ACPI: Lid Switch [LID]
<4>Marking TSC unstable due to: TSC halts in idle.
<4>Clocksource tsc unstable (delta = -296113317 ns)
<6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one month, y3k
<6>ACPI: PCI Interrupt 0000:02:01.3[B] -> GSI 22 (level, low) -> IRQ 22
<5>asus-laptop: Asus Laptop Support version 0.42
<5>asus-laptop: F2 model detected
<6>tifm_core: MMC/SD card detected in socket 0:0
<6>usbcore: registered new interface driver hiddev
<6>ACPI: Battery Slot [BAT1] (battery present)
<6>Bluetooth: Generic Bluetooth USB driver ver 0.1
<6>input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input8
<6>ACPI: LNXTHERM:01 is registered as thermal_zone0
<6>ACPI: Thermal Zone [ATF0] (58 C)
<6>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
<6>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 17
<6>eth0: RTL8169sb/8110sb at 0xf928e400, 00:01:4a:f9:7b:36, XID 10000000 IRQ 17
<6>input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.0-2
<6>usbcore: registered new interface driver btusb
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>Yenta: CardBus bridge found at 0000:02:01.0 [104d:818f]
<6>Yenta: Enabling burst memory read transactions
<6>Yenta: Using CSCINT to route CSC interrupts to PCI
<6>Yenta: Routing CardBus interrupts to PCI
<6>Yenta TI: socket 0000:02:01.0, mfunc 0x01001b22, devctl 0x64
<6>Yenta: ISA IRQ mask 0x0cb8, PCI irq 21
<6>Socket status: 30000006
<6>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
<7>ieee80211_crypt: registered algorithm 'NULL'
<6>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
<6>cs: IO port probe 0xc000-0xcfff: clean.
<6>pcmcia: parent PCI bridge Memory window: 0xfea00000 - 0xfeafffff
<6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
<6>ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 23 (level, low) -> IRQ 23
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[feafe800-feafefff]
Max Packet=[2048] IR/IT contexts=[4/8]
<6>ieee80211: 802.11 data/management/control stack, git-1.1.13
<6>ieee80211: Copyright (C) 2004-2005 Intel Corporation
<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
<7>phy0: Selected rate control algorithm 'pid'
<6>Bluetooth: HCI USB driver ver 2.9
<6>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
<6>ipw2200: Copyright(c) 2003-2006 Intel Corporation
<6>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
<6>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301ecb3df]
<6>phy0: hwaddr 00:c0:ca:1b:37:48, rtl8187 V1 + rtl8225z2
<6>usbcore: registered new interface driver rtl8187
<6>usbcore: registered new interface driver hci_usb
<6>ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
<6>cs: IO port probe 0x100-0x3af: clean.
<6>cs: IO port probe 0x3e0-0x4ff: clean.
<6>cs: IO port probe 0x820-0x8ff: clean.
<6>cs: IO port probe 0xc00-0xcf7: clean.
<6>cs: IO port probe 0xa00-0xaff: clean.
<6>Bluetooth: L2CAP ver 2.9
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.8
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@redhat.com
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sun Aug 3 12:09:03 2008
-----> Starting boot shell on tty2
-----> Boot-Logging enabled on /dev/tty3
-----> Kernel logging enabled on: /dev/tty4
-----> Including required kernel modules...
-----> Probing module: ahci
-----> Probing module: ata_piix
-----> Probing module: ehci-hcd
-----> Probing module: uhci-hcd
-----> Waiting for CD/DVD device(s) to appear...
-----> Mounting CD/DVD drive...
-----> Mounting compressed unified tree...
-----> Stopping boot shell
-----> Stopping boot logging
Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Aug 3
12:09:26 2008
done
Starting udevd: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
doneroot file system (/) is NOT being checked.
mount: can't find / in /etc/fstab or /etc/mtab
Setting up the hardware clockhwclock: With --noadjfile, you must specify either
--utc or --localtime
failed
Activating device mapper...
done
Starting MD Raid unused
Waiting for udev to settle...
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
No volume groups found
No volume groups found
Activating LVM volume groups...
No volume groups found
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
doneFuse filesystem already availabledone
Mounting fuse control filesystemdone
done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles <notice>killproc: kill(1178,29)
Creating /var/log/boot.msg
doneActivating remaining swap-devices in /etc/fstab...
donedone
Setting up linker cache (/etc/ld.so.cache) using ldconfigdone
Turning quota on
Checking quotas. This may take some time.
done
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
Configuring serial ports...
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
System Boot Control: The system has been set up
Skipped features: boot.md
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(1178,3)
Boot logging started on /dev/tty1(/dev/console) at Sun Aug 3 12:10:08 2008
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Starting D-Bus daemondone
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [
/sbin/resmgrd ], [ CONSOLE=/dev/console IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc
DAEMON=/sbin/resmgrd ]
done
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [
CONSOLE=/dev/console IFS=
TERM=linux SHELL=/bin/sh LC_ALL=POSIX ELOG_CONSOLE=/dev/tty3
INIT_VERSION=sysvinit-2.86 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors REDIRECT=/dev/tty1
systemIntegrity=clean COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs
PARTITIONER=sfdisk IFS_ORIG=
SHLVL=2 HOME=/ ramdisk_blocksize=4096 BOOT_IMAGE=linux
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 SPLASH=yes KLOG_CONSOLE=4
splash=silent ramdisk_size=512000 LIVECD=livecd
LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0 _=/sbin/startproc
DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [
CONSOLE=/dev/console IFS=
TERM=linux SHELL=/bin/sh LC_ALL=POSIX ELOG_CONSOLE=/dev/tty3
INIT_VERSION=sysvinit-2.86 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors REDIRECT=/dev/tty1
systemIntegrity=clean COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs
PARTITIONER=sfdisk IFS_ORIG=
SHLVL=2 HOME=/ ramdisk_blocksize=4096 BOOT_IMAGE=linux
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 SPLASH=yes KLOG_CONSOLE=4
splash=silent ramdisk_size=512000 LIVECD=livecd
LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0 _=/sbin/startproc
DAEMON=/sbin/klogd ]
Starting syslog servicesdone
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console
IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG= _=/sbin/startproc
DAEMON=/sbin/acpid ]
Starting acpid done
Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [
/usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc
DAEMON=/usr/sbin/console-kit-daemon ]
done
Loading CPUFreq modulesdone
Starting HAL daemonCreating X Config<notice>startproc: execve
(/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console
IFS=
SHELL=/bin/sh TERM=linux OLDPWD=/etc/sysconfig/network LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=no _=/sbin/startproc
DAEMON=/usr/sbin/NetworkManager ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [
CONSOLE=/dev/console IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc
DAEMON=/sbin/portmap ]
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [
CONSOLE=/dev/console IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc
DAEMON=/sbin/auditd ]
<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D
], [ CONSOLE=/dev/console IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc
DAEMON=/usr/sbin/avahi-daemon ]
<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd
-D ], [ CONSOLE=/dev/console IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc
DAEMON=/usr/sbin/avahi-dnsconfd ]
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [
CONSOLE=/dev/console IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc
DAEMON=/usr/sbin/cupsd ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [
CONSOLE=/dev/console IFS=
SHELL=/bin/sh TERM=linux LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
ELOG_CONSOLE=/dev/tty3 initrd=initrd,10240768.spl
TRANSFER_ERRORS_FILE=/tmp/transfer.errors systemIntegrity=clean
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317
RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
ELOG_FILE=/var/log/boot.kiwi LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N FSTYPE=squashfs LINES=44
PARTITIONER=sfdisk IFS_ORIG=
HOME=/ SHLVL=2 BOOT_IMAGE=linux ramdisk_blocksize=4096
IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 ramdisk_size=512000 splash=silent
KLOG_CONSOLE=4 SPLASH=yes LIVECD=livecd ARCH=i686
LIVECD_CONFIG=/cdrom/config.isoclient DEBUG=0 _=/sbin/startproc
DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f
/var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin
SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
done
done
Starting the NetworkManagerdone
Starting RPC portmap daemondone
Loading keymap i386/qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneStarting auditd done
Starting Avahi daemon.done
Starting Avahi DNS Configuration daemondone
Starting cupsddone
Starting java.binfmt_misc done
Checking/updating CPU microcode done
Starting Name Service Cache Daemondone
Starting mail service (Postfix)done
Starting powersaved: done
Initializing random number generatordone
Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ],
[ CONSOLE=/dev/console IFS=
TERM=linux SHELL=/bin/sh ELOG_CONSOLE=/dev/tty3 INIT_VERSION=sysvinit-2.86
initrd=initrd,10240768.spl TRANSFER_ERRORS_FILE=/tmp/transfer.errors
KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 systemIntegrity=clean COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/
ELOG_FILE=/var/log/boot.kiwi LANG=en_US.UTF-8 LOCAL_BOOT=no
UNIONFS_CONFIG=/dev/ram1,/dev/loop1,aufs PREVLEVEL=N LINES=44 FSTYPE=squashfs
PARTITIONER=sfdisk IFS_ORIG=
QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ ramdisk_blocksize=4096
BOOT_IMAGE=linux IMAGE=/dev/ram1;openSUSE-11.0.i686;2.7.0 XCURSOR_THEME=DMZ
WINDOWMANAGER= SPLASH=yes KLOG_CONSOLE=4 splash=silent ramdisk_size=512000
LIVECD=livecd LIVECD_CONFIG=/cdrom/config.isoclient ARCH=i686 DEBUG=0
_=/sbin/startproc DAEMON=/usr/bin/kdm ]
done
Starting service kdmdone
done
Master Resource Control: runlevel 5 has been reached
<notice>killproc: kill(2464,3)
4. I have formated a Partition and no Error occured! I think in the live
system, there is something different to the main dvd
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.