https://bugzilla.novell.com/show_bug.cgi?id=402526 Summary: b43-phy0 ERROR: PHY transmission error Product: openSUSE 11.0 Version: Final Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: crrodriguez@novell.com QAContact: qa@suse.de Found By: Development Using this card: /usr/sbin/hwinfo --wlan 01: PCI 300.0: 0282 WLAN controller [Created at pci.310] UDI: /org/freedesktop/Hal/devices/pci_14e4_4311 Unique ID: y9sn.wZtoJ4c7zyA Parent ID: 3hqH.gMd7Qwtg110 SysFS ID: /devices/pci0000:00/0000:00:03.0/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: network Model: "Broadcom BCM94311MCG wlan mini-PCI" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4311 "BCM94311MCG wlan mini-PCI" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x1375 Revision: 0x02 Driver: "b43-pci-bridge" Driver Modules: "ssb" Device File: wlan0 Features: WLAN Memory Range: 0xb8000000-0xb8003fff (rw,non-prefetchable) IRQ: 18 (no events) HW Address: 00:1a:73:88:05:9c Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v000014E4d00004311sv0000103Csd00001375bc02sc80i00" Driver Info #0: Driver Status: ssb is active Driver Activation Cmd: "modprobe ssb" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #18 (PCI bridge) With WPA2 frecuently causes b43-phy0 ERROR: PHY transmission error to be written to the logs, sometimes huge lot of log entries, after that, the network conectivity starts to drop performance dramatically, the system becomes extremely unstable, and then freeze/crashs completely after a certain period of time. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.