https://bugzilla.novell.com/show_bug.cgi?id=377529
User gemocker@aol.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=377529#c2
Gerhard Mocker changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|gemocker@aol.com |
--- Comment #2 from Gerhard Mocker 2008-04-12 07:00:29 MST ---
Created an attachment (id=207622)
--> (https://bugzilla.novell.com/attachment.cgi?id=207622)
Yast2 log files with grub error 23
entries from 2008-04-12 show what happens when doing the following with SATA,
RAID1 drives connected:
YAST2, Boot : start from scratch, propose configuration, finish ..
Resulting in grub Error 23
Please check the description in point 1.1 of the referenced document:
http://en.opensuse.org/Bugs/YaST. It is not up to date.
Manually and again after quite some trial and error, guessing, sorting out
different information from different forums, we found, that grub can also boot
Windows with the following configuration files contents (Grub was installed
before with the SATA, RAID1 drives disconnected):
device.map:
(fd0) /dev/fd0
(hd0) /dev/sda
(hd1) /dev/sdb
menu.lst:
# Modified by YaST2. Last modification on Sun Apr 6 10:23:40 CEST 2008
default 1
timeout 12
gfxmenu (hd0,1)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3
root (hd0,1)
kernel /boot/vmlinuz-2.6.22.17-0.1-default
root=/dev/disk/by-id/scsi-SATA_ST320413A_5ED0576T-part2 resume=/dev/sda1
splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: windows###
title WindowsXP Professional
rootnoverify (hd1,0)
makeactive
chainloader (hd1)+1
map (hd0) (hd1)
map (hd1) (hd0)
boot
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
rootnoverify (hd0,1)
chainloader (fd0)+1
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3
root (hd0,1)
kernel /boot/vmlinuz-2.6.22.17-0.1-default
root=/dev/disk/by-id/scsi-SATA_ST320413A_5ED0576T-part2 showopts ide=nodma
apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name:
Kernel-2.6.22.17-0.1-default###
title Kernel-2.6.22.17-0.1-default
root (hd0,1)
kernel /boot/vmlinuz-2.6.22.17-0.1-default
root=/dev/disk/by-id/scsi-SATA_ST320413A_5ED0576T-part2 resume=/dev/sda1
splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-default
. I hope this helps
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.