https://bugzilla.novell.com/show_bug.cgi?id=349248
User jsmeix@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=349248#c2
Johannes Meixner
From the message in /var/log/messages it looks like a low-level USB communication problem (i.e. a problem in the kernel area). The reason might be that this piece of hardware crap needs firmware upload before it can operate, see http://openprinting.org/show_printer.cgi?recnum=HP-LaserJet_1000
Check if it is perhaps the usblp <-> usbfs/libusb conflict according to bug #184825 and if not, re-assign it to USB/kernel provided you installed and configured the right driver with firmware upoload for it. I wonder how a HP LaserJet 1000 can be "configured correctly via yast" at all. According to http://openprinting.org/show_printer.cgi?recnum=HP-LaserJet_1000 and according to http://hplip.sourceforge.net/supported_devices/laser.html it is a ZJStream printer and because of bug #263181 and bug #227702 we cannot provide a ZJStream driver in out products but via newest HPLIP e.g. from http://download.opensuse.org/repositories/home:/jsmeix/ it should be supported (see bug #342704) only when you set it up as root via hp-setup. The driver in HPLIP should do even the firmware upload automatically. As far as I see the real bug here is that YaST did set up this device even if there is (normally) neither a PPD file nor a driver installed in your system (except you did some manuall installation of whatever software from wherever). Therefore provide a y2log so that Michal can check why YaST did set up this device. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.