https://bugzilla.novell.com/show_bug.cgi?id=331897 Summary: Sata 1 hdd don't work after s2ram Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: mymilo2@bk.ru QAContact: qa@suse.de Found By: Other There are 2 hdds on my system. (MSI k9ag neo 2 on AMD690G,AMD X2 5200+, 1gb ram) First is sata II WD 320 Gb, second - Maxtor Diamond 10 200Gb If i do #s2ram -f -p -s whith only one (WD) hdd connected everything ok? but if i connect both, unsuspend takes about 2 minutes with black screen and after second hdd dont work. here is end of dmesg ofter resume: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6: EH pending after completion, repeating EH (cnt=4) sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] Starting disk ata2.00: qc timeout (cmd 0x27) ata2.00: failed to read native max address (err_mask=0x4) ata2.00: revalidation failed (errno=-5) ata2: failed to recover some devices, retrying in 5 secs ata4.00: qc timeout (cmd 0xa1) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata4.00: revalidation failed (errno=-5) ata4: failed to recover some devices, retrying in 5 secs ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata2.00: revalidation failed (errno=-5) ata2: limiting SATA link speed to 1.5 Gbps ata2.00: limiting speed to UDMA/133:PIO3 ata2: failed to recover some devices, retrying in 5 secs ata4.00: qc timeout (cmd 0xa1) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata4.00: revalidation failed (errno=-5) ata4: limiting SATA link speed to 1.5 Gbps ata4.00: limiting speed to UDMA/100:PIO3 ata4: failed to recover some devices, retrying in 5 secs ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata2.00: revalidation failed (errno=-5) ata2.00: disabled ata4.00: qc timeout (cmd 0xa1) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata4.00: revalidation failed (errno=-5) ata4.00: disabled ata2: EH pending after completion, repeating EH (cnt=4) ata2: soft resetting link ata4: EH pending after completion, repeating EH (cnt=4) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2: EH complete sd 1:0:0:0: [sdb] START_STOP FAILED sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK sd 4:0:0:0: [sdc] Starting disk sd 1:0:0:0: [sdb] READ CAPACITY failed sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK sd 1:0:0:0: [sdb] Sense not available. sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 00 00 00 sd 1:0:0:0: [sdb] Asking for cache data failed sd 1:0:0:0: [sdb] Assuming drive cache: write through ata4: soft resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4: EH complete Restarting tasks ... done. VFS: busy inodes on changed media. VFS: busy inodes on changed media. SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.