https://bugzilla.novell.com/show_bug.cgi?id=327518 Summary: "HPA unlocked" causes wrong disk geometry Product: openSUSE 10.3 Version: RC 1 Platform: i386 OS/Version: openSUSE 10.3 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: pascal.bombardier@bull.net QAContact: qa@suse.de Found By: Other installing opensuse 10.3 RC1 HPA unlocked seems to leads to an incorrect disk geometry (5GB instead of 40GB) dmesg output SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.11 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata1.01: HPA unlocked: 78125000 -> 11056496, native 78165360 ata1.01: ATA-5: WDC WD400BB-75CAA0, 16.06V16, max UDMA/100 ata1.01: 11056496 sectors, multi 16: LBA ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 ata2.00: ATAPI: _NEC DV-5800A, 1.92, max UDMA/33 ata2.01: ATAPI: LITE-ON DVDRW SOHW-832S, VS0M, max UDMA/33 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA WDC WD400BB-75CA 16.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM _NEC DV-5800A 1.92 PQ: 0 ANSI: 5 scsi 1:0:1:0: CD-ROM LITE-ON DVDRW SOHW-832S VS0M PQ: 0 ANSI: 5 My /dev/sdb disk is now 688 cylinders instead of 4863 More error occured after that sdb1 sdb2 sdb3 sdb4 < > sdb: p2 exceeds device capacity sdb: p3 exceeds device capacity sdb: p4 exceeds device capacity attempt to access beyond end of device sdb: rw=0, want=17446406, limit=11056496 Buffer I/O error on device sdb2, logical block 7662912 attempt to access beyond end of device sdb: rw=0, want=35503652, limit=11056496 Buffer I/O error on device sdb4, logical block 0 attempt to access beyond end of device sdb: rw=0, want=35503652, limit=11056496 Buffer I/O error on device sdb4, logical block 0 attempt to access beyond end of device sdb: rw=0, want=35503652, limit=11056496 Buffer I/O error on device sdb4, logical block 0 attempt to access beyond end of device modinfo libata filename: /lib/modules/2.6.22.5-23-default/kernel/drivers/ata/libata.ko version: 3.00 license: GPL description: Library module for ATA devices author: Jeff Garzik srcversion: 29B094F9DE351C57BA2297A depends: scsi_mod supported: yes vermagic: 2.6.22.5-23-default SMP mod_unload 586 parm: atapi_enabled:Enable discovery of ATAPI devices (0=off, 1=on) (int) parm: atapi_dmadir:Enable ATAPI DMADIR bridge support (0=off, 1=on) (int) parm: atapi_passthru16:Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on) (int) parm: fua:FUA support (0=off, 1=on) (int) parm: ignore_hpa:Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk) (int) parm: pata_dma:Use DMA on PATA devices (int) parm: ata_probe_timeout:Set ATA probing timeout (seconds) (int) parm: noacpi:Disables the use of ACPI in suspend/resume when set (int) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.