https://bugzilla.novell.com/show_bug.cgi?id=283154 Summary: GLX calls freeze/crash server after some time on RV100 using radeon driver. Product: openSUSE 10.2 Version: Final Platform: i686 OS/Version: openSUSE 10.2 Status: NEW Severity: Major Priority: P5 - None Component: X.Org AssignedTo: sndirsch@novell.com ReportedBy: dcourvoisier@esmertec.com QAContact: sndirsch@novell.com In opensuse 10.2, fresh install, the Xserver is running out of GLX resource after some time, avoiding any application to run. The machine is correctly running under Suse 9.3. The server is a Dell Poweredge 1855, it has Radeon 7000/VE gfx. The radeon driver is used. The following command starts to fail after ~10 minutes of successful run: "while (true); do glxinfo; sleep 1; done". After ~10 minutes, glxinfo outputs: X Error of failed request: GLXBadContext Major opcode of failed request: 143 (GLX) Minor opcode of failed request: 5 (X_GLXMakeCurrent) Serial number of failed request: 17 Current serial number in output stream: 17 name of display: :0.0 X Error of failed request: BadAlloc (insufficient resources for operation) Major opcode of failed request: 143 (GLX) Minor opcode of failed request: 3 (X_GLXCreateContext) Serial number of failed request: 16 Current serial number in output stream: 17 .. If the while loop is not stopped, after some time, the Xserver answers to any X command with: Xlib: connection to ":0.0" refused by server Xlib: Maximum number of clients reached Error: Can't open display: :0.0 Some info about the configuration below: # rpm -q xorg-x11-server xorg-x11-driver-video xorg-x11-server-7.2-30.6 xorg-x11-driver-video-7.2-33 # hwinfo --gfx 25: PCI 60d.0: 0300 VGA compatible controller (VGA) [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_1002_5159 Unique ID: vvWr.sO1ILfZdWD9 Parent ID: 6NW+.c7JTK_YUBi2 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:0d.0 SysFS BusID: 0000:06:0d.0 Hardware Class: graphics card Model: "Dell ATI Radeon VE (device 018a)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5159 "Radeon VE" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x018a "ATI Radeon VE (device 018a)" Memory Range: 0xd0000000-0xd7ffffff (rw,prefetchable) I/O Ports: 0xcc00-0xccff (rw) Memory Range: 0xdf7f0000-0xdf7fffff (rw,non-prefetchable) Memory Range: 0xdf700000-0xdf71ffff (ro,prefetchable,disabled) IRQ: 7 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00001002d00005159sv00001028sd0000018Abc03sc00i00" Driver Info #0: XFree86 v4 Server Module: radeon Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) Primary display adapter: #25 Other log/conf files will be attached to bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.